Improvement of nuclide leaching resistance of paraffin waste form with low density polyethylene

Low-level liquid borate wastes have been immobilized with paraffin wax using a concentrate waste drying system (CWDS) in Korean nuclear power plants. The possibility for improving chemical durability of paraffin waste form was suggested in this study. A small amount of low density polyethylene (LDPE) was added to increase the leaching resistance of the existing paraffin waste form. The influence of LDPE on the leaching behavior of waste form was investigated by performing leaching test according to ANSI/ANS-16.1 procedure during 325 days. It was observed that the leaching of nuclides immobilized within paraffin waste form made a marked reduction although little content of LDPE was added to waste form. The acceptance criteria of paraffin waste form associated with leachability index (LI) and compressive strength after the leaching test were fully satisfied with the help of LDPE.     

Swelling related to ettringite crystal formation in chromite ore processing residue

Several million tons of Chromite Ore Processing Residue (COPR) were deposited at two sites in New Jersey and Maryland, USA, and over time they exhibited extensive heaving phenomena. Ettringite, a needle-shaped mineral and an expansive mineral commonly recognized in the literature concerning cement- and soil, has been identified extensively in numerous COPR samples collected from these sites. It was therefore believed that ettringite formation and its crystal growth are strongly associated with COPR heaving. We investigated the correlation between ettringite and the heaving phenomena in COPR materials that contained no initial ettringite. Two identical COPR samples were exposed to a 4% w/w sulfate solution (25°C, 50°C) in a confined swell test apparatus. Both swell test samples were analyzed by means of X-ray powder diffraction. The peak intensities of newly formed ettringite were more pronounced in the sample tested at 50°C, and swell development was only observed in this sample. Scanning electron microscopy analyses revealed well-crystallized ettringite needles exceeding 40 μm in length for this sample, while ettringite crystals less than 15 μm in length formed in the sample tested at 25°C. Therefore, the results suggest that the quantity of ettringite and the extent of crystallization play a key role in the heave of COPR.     

Estimation of methane emission potential using the Clean Development Mechanism (CDM) tool for municipal solid waste landfill in Mandalay,Myanmar

Journal of Material Cycles and Waste Management - Municipal solid waste (MSW) landfills are the third largest source of global methane emissions as biogas (11%). In developing countries, MSW...     

Analysis of long-term settlement of municipal solid waste landfills as determined by various settlement estimation methods

In this study, several existing municipal solid waste (MSW) settlement estimation methods are reviewed and applied to analyze the settlement data of nine MSW landfills. Because a biodegradation-related settlement contributes differently to a long-term total settlement depending on the age of landfills, the actual MSW landfill sites are classified into three groups to specifically address the validity of each method in its prediction of a long-term settlement for each age category. Results demonstrate that there are considerable decreases in predicted settlement potentials as fill age increases. Comparisons indicate that the individual estimation methods display a considerable variation in predicting settlements in the fresh MSW landfills. On the other hand, for the old refuse landfills, all of the estimation methods, except the extended soil model, predict low settlement potentials.     

Measuring the flux at the interface of coal-tar impacted sediment and river water near a former MGP site

Determining water movement through contaminated sediment is critical for characterizing transport of chemicals from the sediment to the overlying water. Field studies to characterize the water flow across the sediment-water interface within a river adjacent to a former manufactured gas plant site were conducted. For this purpose, a new design of an interfacial flow meter was developed and tested. The in situ components of the system consisted of: a cylinder with an interfacial area of 2342 cm2; a dome attached to the cylinder; and a flow tube that allows water to flow from inside the dome to the river at the rate equal to the specific discharge across the sediment-water boundary. A 'heat-pulse' method was used to measure flow by heating the center of the flow tube for a brief time period and measuring the temperature profile within the tube over time. The system was calibrated to measure volumetric flux in the range 1.5-4.0 cm d(-1), however using a flow-addition method, the measurement of lower velocities also was accomplished, and calibration at higher fluxes is possible. From the groundwater flow at the interface of the coal-tar impacted sediment and information on the sediment pore water concentrations of several PAHs (poly-cyclic aromatic hydrocarbons), the mass flux of these PAHs to the river were estimated. Information on PAH mass flux at the sediment-water interface is useful for site assessment, including the evaluation of remediation alternatives and longer term site characterization.     

Optimization of the food waste water incineration with respect to CO and NO<Subscript>x</Subscript> emission characteristics

The incineration of food waste water in conjunction with the domestic waste is getting attention as a food waste water treatment method, due to its low treatment cost and high efficiency. Many studies verified that the ammonia in the food waste water served as a reducing agent to suppress the generation of NO_x when the food waste water was injected and incinerated. However, they have not revealed the correlation between the change in the concentration of the CO and NO_x by the influence of the solid matters contained in the food waste water on the incineration of the wastes. The purpose of this study is to determine the optimum amount of the food waste water injected through four nozzles in the primary and secondary incineration chambers and to assess the correlation between the concentration of CO and NO_x in accordance with the food waste water injection in each chamber of the incinerator. For the study, four food waste water injection nozzles were installed; two (A and B) at the top of the primary incineration chamber and the other two (C and D) in the secondary incineration chamber. The correlation between the change in the concentration of CO and NO_x was studied adjusting the amount of the food waste water injected through the nozzles. From the result, Case II showed the concentration of CO and NO_x as 1.8–10 and 14–26 ppm, respectively, while Case I showed that of CO and NO_x as 15–30 and 9–18 ppm, respectively. Those levels are well below the Korean emission criteria, 50 ppm for CO and 80 ppm for NO_x. Based on the results, it is evident there is a certain trade-off between emission of CO and NO_x, and Case II which has relatively low concentration of CO is easier and cheaper to control.     

Reducing security vulnerabilities for critical infrastructure

In this paper, we show the need for improved Process Control System (PCS) security, and describe some of the promising research areas in PCS security. One implementation of PCS in critical infrastructure and factory automation is a supervisory, control, and data acquisition (SCADA) system, a real-time industrial process control system which centrally monitors and controls remote and/or local processes utilizing plant, equipment, or devices (such as switches, valves, pumps, relays, etc.) while collecting and logging field data. Current SCADA systems are distributed, networked, and dependent on open protocols for the internet, which are exposed to remote cyber terrorism. They are particularly vulnerable to unauthorized access. We give some examples of SCADA processes with natural gas control systems in USA and the Ubiquitous Sensor Network (USN) in Korea. We also examine a representative vulnerability and corresponding measures for security, and present an example of concrete measures for the security of mass transportation as a critical infrastructure.     

A non-parametric distance-based method using all available indicators for integrated environmental assessment – a case study of the Mid-Atlantic Region,USA

The paper presents a multivariate measure useful for integrated environmental assessments. It is a weighted distance measure applied to metric data but based on nonparametric statistical procedures. The proposed measure allows all environmental indicators to be used directly without any reduction in dimension (e.g. as in principal component analysis) nor losing variance while being able to tolerate possible non-normality of the indicators, as well as non-linear relationships among them. Results of the hypothetical example and the Mid-Atlantic case study show that the proposed measure is suitable and valuable for integrating multiple indicators into a single index, an important task in integrated environmental assessment.     

Degradation of ammonium dinitramide (ADN) in digested sewage sludge under strict anaerobic conditions

The biodegradation of one popular nitramine energetics, ammonium dinitramide (ADN) by mixture of denitrifying bacterial species was investigated. ADN was observed to be effectively mineralized in the anaerobic mixed culture. The initial ADN concentration of 250 mg/L was reduced to non‐detectable levels (> 99% removal efficiency) in 5 days of incubation under anaerobic conditions. Final products generated from anaerobic degradation of nitramine energetics by anaerobic metabolism were NH₄ ⁺, CH₄, and CO₂ that were released to the environment with the denitrifiers’ growth. In addition, it was found that the activity of denitrifiers was inhibited by high concentration of ammonia generated through the degradation reactions of energetic nitrites.