Biology and management of two important <Emphasis Type="Italic">Conyza</Emphasis> weeds: a global review

Weed management is one of the prime concerns for sustainable crop production. Conyza bonariensis and Conyza canadensis are two of the most problematic, noxious, invasive and widespread weeds in modern-day agriculture. The biology, ecology and interference of C. bonariensis and C. canadensis have been reviewed here to highlight pragmatic management options. Both these species share a unique set of biological features, which enables them to invade and adapt a wide range of environmental conditions. Distinct reproductive biology and an efficient seed dispersal mechanism help these species to spread rapidly. Ability to interfere strongly and to host crop pests makes these two species worst weeds of cropping systems. These weed species cause 28–68 % yield loss in important field crops such as soybean and cotton every year. These weeds are more prevalent in no-till systems and, thus, becoming a major issue in conservation agriculture. Cultural practices such as crop rotations, seed rate manipulation, mulching, inter-row tillage and narrow row spacing may provide an effective control of these species. However, such methods are not feasible and applicable under all types of conditions. Different herbicides also provide a varying degree of control depending on crop, agronomic practices, herbicide dose, application time and season. However, both these species have evolved resistance against multiple herbicides, including glyphosate and paraquat. The use of alternative herbicides and integrated management strategies may provide better control of herbicide-resistant C. bonariensis and C. canadensis. Management plans based on the eco-biological interactions of these species may prove sustainable in the future.     

Assessment of heavy metal toxicants in the roadside soil along the N-5, National Highway, Pakistan

The assessment of the toxicants in roadside soil on regular basis has become extremely essential with the increase in awareness for the metal toxicity in the environment. The present study investigates the presence of toxic metals along National Highway (N-5), Pakistan. Averages of about 1.3 million per month of automobile vehicles ply on this route. Lead (Pb), zinc (Zn), copper (Cu), nickel (Ni), cadmium (Cd), cobalt (Co), manganese (Mn), mercury (Hg), and iron (Fe) were analyzed by atomic absorption spectrophotometry in roadside soil at the nine selected locations along the highway. Strong Pearson correlations (α = 0.05) were found between Pb and Zn (r(2)?= 0.887), Fe and Mn (r(2)?= 0.880), Hg and Cd (0.864), Cu and Zn (0.838), and Cu and Pb (0.814). The correlation between the elemental compositions of the main automobile components revealed vehicular traffic as the main non-point source of roadside soil pollution. Extremely high level of mercury, 144.05 mg kg(-1), was found at S5. It was revealed that the unregulated incineration and dumping sites of hazardous waste material along N-5 were also responsible for these contaminations. Multivariate analysis on the obtained data also disclosed the same interpretation. Cluster analysis of the data grouped Pb, Zn, and Cu at 85.23% similarity, whereas, Cd, Hg, and Ni were grouped at 78.75% similarity basis. The findings need swift action against the root cause of soil pollution.     

Do risk perceptions and constraints influence the adoption of climate change practices among small livestock herders in Punjab,Pakistan?

Environmental Science and Pollution Research - Climate change is severely damaging the agricultural system of many food producing regions worldwide. Small/subsistent livestock herders are the most...     

Stochastic modeling approaches based on neural network and linear–nonlinear regression techniques for the determination of single droplet collection efficiency of countercurrent spray towers

This paper presents a new mathematical model and a two-layer neural network approach to predict the single droplet collection efficiency (SDCE), η _d, of countercurrent spray towers. SDCE values were calculated using MATLAB^® algorithm for 205 different artificial scenarios given in a large range of operating conditions. Theoretical results were compared with outputs obtained from a two-layer neural network and DataFit^® scientific software. The predicted model developed from linear–nonlinear regression analysis and network outputs agreed with the theoretical data, and all predictions proved to be satisfactory with a correlation coefficient of about 0.921 and 0.99, respectively. By using the proposed model, iterations between Reynolds number (Re), drag coefficient (C _D) and terminal velocity values (v _T) were neglected for a large range of operating conditions. SDCE values were also obtained speedily and practically for five main operating inputs used in the model.     

Detecting micronuclei frequency in some aquatic organisms for monitoring pollution of Izmir Bay (Western Turkey)

Micronuclei tests is a system of mutagenicity testing used for determining the pollution and chemicals causing changes in DNA fragments such as micronuclei in the cytoplasm of interphase cells. Damage caused on the DNA by genotoxic pollutants is the first consequence occurring in the aquatic organisms. Thus, it was attempted to determine whether pollution affected the erythrocytes and gills of fish Gobius niger and haemolymph and gills of mussels Mytilus galloprovincialis living in Izmir Bay at the level of DNA by the means of micronuclei (MN) test. Organisms used in the MN test were collected from seven locations (Alsancak, Alaybey Shipyard, Karsiyaka, Bostanli, Göztepe, Konak and Pasaport) which are known as the most polluted part of inner Bay of Izmir (Western Coast of Turkey). According to the results of the present study, frequency of MN was found at high level in Alaybey Shipyard and Pasaport where wastes from existing dockyard contributed to high level of pollution. In conclusion, this study indicates that the micronuclei test gives sensitive results in monitoring the pollution, especially the pollution of harbor, and thus it might be used as standard method in regular monitoring of pollution of coastal ecosystem.     

Degradation of a commercial textile biocide with advanced oxidation processes and ozone

The occurrence of significant amounts of biocidal finishing agents in the environment as a consequence of intensive textile finishing activities has become a subject of major public health concern and scientific interest only recently. In the present study, the treatment efficiency of selected, well-known advanced oxidation processes (Fenton, Photo-Fenton, TiO(2)/UV-A, TiO(2)/UV-A/H(2)O(2)) and ozone was compared for the degradation and detoxification of a commercial textile biocide formulation containing a 2,4,4'-trichloro-2'-hydroxydiphenyl ether as the active ingredient. The aqueous biocide solution was prepared to mimic typical effluent originating from the antimicrobial finishing operation (BOD(5,o) < or =5 mg/L; COD(o)=200 mg/L; DOC(o) (dissolved organic carbon)=58 mg/L; AOX(o) (adsorbable organic halogens)=48 mg/L; LC(50,o) (lethal concentration causing 50% death or immobilization in Daphnia magna)=8% v/v). Ozonation experiments were conducted at different ozone doses (500-900 mg/h) and initial pH (7-12) to assess the effect of ozonation on degradation (COD, DOC removal), dearomatization (UV(280) and UV(254) abatement), dechlorination (AOX removal) and detoxification (changes in LC(50)). For the Fenton experiments, the effect of varying ferrous iron catalyst concentrations and UV-A light irradiation (the Photo-Fenton process) was examined. In the heterogenous photocatalytic experiments, Degussa P25-type TiO(2) was used as the catalyst and the effect of reaction pH (3, 7 and 12) and H(2)O(2) addition on the photocatalytic treatment efficiency was examined. Although in the photochemical (i.e. Photo-Fenton, TiO(2)/UV-A and TiO(2)/UV-A/H(2)O(2)) experiments appreciably higher COD and DOC removal efficiencies were obtained, ozonation appeared to be equally effective to achieve dearomatization (UV(280) abatement) at all studied reaction pH. During ozonation of the textile biocide effluent, AOX abatement proceeded significantly faster than dearomatization and was complete after 20 min ozonation (267 mg O(3)). On the other hand, for complete detoxification, ozonation had to be continued for at least 30 min (corresponding to 400mg O(3)). Effective AOX and acute toxicity removal was also obtained after heterogeneous photocatalytic treatment (TiO(2)/UV-A and TiO(2)/UV-A/H(2)O(2)). The Fenton-based treatment experiments and particularly the dark Fenton reaction resulted in relatively poor degradation, dearomatization, AOX and acute toxicity removals.     

Ozonation of Procaine Penicillin G formulation effluent Part I: Process optimization and kinetics

Ozonation characteristics of synthetic Procaine Penicillin G (PPG) formulation effluent were investigated in a semi-batch ozone reactor at different pH (3, 7 and 12), ozone feed rates (600-2600 mg h-1) and COD values (200-600 mg l-1). Ozonation of aqueous PPG effluent resulted in 37 (82)% COD removal after 60 (120) min ozonation when the reaction pH was kept constant at pH=7.900 mg l-1 (corresponding to 50% of the total introduced) ozone was absorbed during a reaction period of 1 h. The effects of increasing the applied ozone dose and the initial COD on the COD abatement rates of PPG effluent were also studied. Results have indicated that increasing the ozone dose and decreasing the COD content both have positive effects on COD removal rates. The significant contribution of the free radical (.OH) reaction pathway to PPG ozonation could be traced using tert-butyl alcohol as the .OH probe compound at varying concentrations. The bimolecular reaction rate constants for the direct reaction of PPG with ozone were found as 152 and 2404 M-1 h-1 at pH=3 and 7, respectively, using the gas phase ozone partial pressures determined from of the outlet gas stream analysis. It could be demonstrated that ozone decomposition to free radicals being triggered by increasing the pH from 3 to 7 is essential for the rate enhancement of PPG effluent ozonation.     

Effect of shape of nanoparticle on heat transfer and entropy generation of nanofluid-jet impingement cooling

ABSTRACT

Al₂O₃/water nanofluid has been numerically examined for the first time with different nanoparticle shapes including, cylindrical, blade, brick, platelet and spherical, on the flat and triangular-corrugated impinging surfaces. The volume fractions of 1.0%, 2.0% and 3.0% nanoparticles have been used. The Reynolds number is between 100–500 depending on the slot diameter. The finite volume method is utilized to determine the governing equations. The study is analyzed to determine how the flow features, heat transfer features and entropy production were affected by the diversity of nanoparticle shape, nanoparticle volume fraction, and shape of impinging surface. Darcy friction factor and Nusselt number are studied in detail for different conditions. The temperature contours are presented in the case of different nanoparticle volume fractions, nanoparticle shapes and both impinging surfaces. The results of the study suggest that the nanoparticle shape of the platelet shows the highest heat transfer development due to the thinner thermal boundary layer. Heat transfer augments with increasing volume fraction of nanoparticles. In addition, the study is consistent with the results of the literature on heat transfer and flow properties.     

Investigation of influence of tungsten mine wastes on the elemental composition of some alpine and subalpine plants on Mount Uludağ, Bursa,Turkey

In this study, the effect of mine work wastes on elemental composition (N, P, Ca, K, Mg, Fe, Mn, Cu, Zn) of some alpine and subalpine plant species and in soils were investigated in the surroundings of the Etibank Wolfram Mine Work in Uludag mountain. Soils and plant parts belonging to Thymus praecox Opiz., Acinos alpinus (L.) Moench, Plantago holosteum Scop and Festuca punctoria Sm species collected from three directions around Wolfram Mine Work were used for our investigations. All samples were analysed by flame atomic absorption spectrophotometer (FAAS) for Ca, K, Mg, Mn, Fe, Zn, and Cu. The significant differences among sample sites were in terms of pH, % CaCO3, % C, % N and % P contents of soil. The changes of Ca, Mg, Fe, Mn, Fe, Zn, and Cu contents in soil were determined to be due to mining activity. Of the four species examined, an important change was determined in concentrations of Mg, Mn, Fe and Zn although P. holosteum and F. punctoria were different in above- and below-ground parts, showing that plant element content is specific to species.     

Variation in trace element mobility and nitrogen metabolism of Verbascum olympicum Boiss. under copper stress

The aim of this study was to evaluate the effects of copper (Cu) stress on accumulation and transport of trace elements, nitrogen assimilation, and growth parameters of Verbascum olympicum. Eight-week-old seedlings were grown in Hoagland's solution and exposed to 0, 50, 250, or 500?µM CuSO₄ for seven days in laboratory conditions. Bioaccumulation of trace elements (boron, bismuth, cobalt, Cu, iron, lithium, manganese, molybdenum, nickel, lead, zinc) in the roots and leaves was determined by inductively coupled plasma–mass spectrometry after one, three, and seven days. Chlorophyll content, nitrate reductase, and glutamine synthetase activities, soluble protein content, and biomass were determined. Copper accumulated in the roots and leaves (up to 19609.8 and 256.2?mg?kg^?1 dry weight, respectively). Other trace elements accumulated to higher levels in the roots of Cu-treated plants compared with those of control plants. High Cu concentrations decreased nitrogen-assimilatory enzyme activities. Compared with control plants, those treated with high Cu concentrations showed lower chlorophyll contents, total protein contents, and biomass. Nitrogen assimilation and growth parameters of V. olympicum were negatively affected by Cu treatment but mineral nutrition was not severely disrupted. The results support the suitability of V. olympicum as a candidate for phytoremediation of Cu-contaminated soils.