Organochlorine pesticide residues in catfish,Tachysurus thalassinus (Ruppell, 1835), from the South Patches of the Bay of Bengal

Twenty-one wild brown rats (Rattus norvegicus) were collected from four areas of Milan (Italy). Main organs were harvested from each rat, fixed in 10% neutral buffer formalin, and embedded in paraffin. Organ sections were stained with hematoxylin and eosin, kidney sections were also stained with the Ziehl-Neelsen method. Graphite furnace atomic absorption spectrophotometry was performed on all kidney samples. The presence of inclusion bodies and karyocytomegaly was scored. Six adult rats out of 21 (28.6%) showed kariocytomegaly and intranuclear inclusion bodies of the renal proximal tubules, characteristic of lead toxicity. The nuclear inclusion bodies were always Ziehl-Neelsen positive. The six rats which showed the characteristic histological alterations ascribed to lead, had lead concentrations statistically higher than the three control rats (4 microg/g wet wt. versus 0.09 microg/g wet wt., P<0.001) and than the captured wild rats. Intranuclear inclusion bodies were found in rats with kidney lead concentrations greater than 0.6 microg/g wet weight. There were significant differences between the four areas of capture. The incidence of intranuclear inclusion bodies and karyocytomegaly in proximal tubular cells was higher in rats with high lead levels detected by spectrophotometry. The present results indicate a renal lead concentration of 0.6 microg/g wet weight as a threshold to detect histologic kidney changes due to lead absorption. Results demonstrate that the examination of adult free-living rats may be considered an appropriate method to obtain a rapid, sensitive, easy, cost effective estimate of lead contamination in urban areas. Animal models allow us to evaluate potential human health risk associated with environmental contamination.     

Phytoplanktonic Community of Organically Polluted Tropical Reservoirs in Eastern India

Plankton is a kaleidoscopic spectrum of organisms with repre-sentatives from almost all phyla of animals and thousands of non-flowering plants. Unicellular protozoans, invertebrates and bacteriato diatoms all drift around as the plankton community. The produc-tion rate of plankton is determined by a host of environmental pa-rameters like physico-chemical properties of water and soil, mete-orological characteristics of the region, and morphometric and hy-drographic features of the water body[3]…     

Effect of different design aspects of pipe for earth air tunnel heat exchanger system: A state of art

Earth air tunnel heat exchanger (EATHE) is a promising passive technique to provide thermal comfort condition in buildings. EATHE system uses undisturbed temperature of the ground for heating/cooling of air. Despite the several advantages, this technique has not become much popular owing to its high capital cost (mainly pipe cost and trench excavation cost) and large land area requirements. The primary objective of this study is to present a comprehensive review of different EATHE pipe layouts, pipe properties and positioning of the pipe with their advantages and limitations. It is observed that the ring pipe layout is the most cost-effective pipe-layout for small size EATHE system because it saves excavation cost by using a trench of the existing foundation of the building. However, Grid pipe-layout is an ideal layout for a large size EATHE system. Multi-layer pipe layouts should be used to reduce the land area requirement significantly. Moreover, EATHE system can be installed beneath the building (under building foot-print) to eliminate extra land area requirement for the installation of EATHE system. This review article shows that the Initial capital cost and land area requirement for the EATHE system can be substantially reduced by using appropriate pipe layout. It can be concluded that if EATHE system is installed with proper design strategies, it will be a clean and cost-effective method for building heating/cooling with significant power savings.     

Biohythane production from organic wastes: present state of art

The economy of an industrialized country is greatly dependent on fossil fuels. However, these nonrenewable sources of energy are nearing the brink of extinction. Moreover, the reliance on these fuels has led to increased levels of pollution which have caused serious adverse impacts on the environment. Hydrogen has emerged as a promising alternative since it does not produce CO₂ during combustion and also has the highest calorific value. The biohythane process comprises of biohydrogen production followed by biomethanation. Biological H₂ production has an edge over its chemical counterpart mainly because it is environmentally benign. Maximization of gaseous energy recovery could be achieved by integrating dark fermentative hydrogen production followed by biomethanation. Intensive research work has already been carried out on the advancement of biohydrogen production processes, such as the development of suitable microbial consortium (mesophiles or thermophiles), genetically modified microorganism, improvement of the reactor designs, use of different solid matrices for the immobilization of whole cells, and development of two-stage process for higher rate of H₂ production. Scale-up studies of the dark fermentation process was successfully carried out in 20- and 800-L reactors. However, the total gaseous energy recovery for two stage process was found to be 53.6 %. From single-stage H₂ production, gaseous energy recovery was only 28 %. Thus, two-stage systems not only help in improving gaseous energy recovery but also can make biohythane (mixture of H₂ and CH₄) concept commercially feasible.     

Application of artificial neural network for prediction of Pb(II) adsorption characteristics

The adsorption of Pb(II) onto the surface of microwave-assisted activated carbon was studied through a two-layer feedforward neural network. The activated carbon was developed by microwave activation of Acacia auriculiformis scrap wood char. The prepared adsorbent was characterized by using Brunauer–Emmett–Teller (BET) surface area analyzer, scanning electron microscope (SEM), and X-ray difractometer. In the present study, the input variables for the proposed network were solution pH, contact time, initial adsorbate concentration, adsorbent dose and temperature, whereas the output variable was the percent Pb(II) removal. The network had been trained by using different algorithms and based on the lowest mean squared error (MSE) value and validation error, resilient backpropagation algorithm with 12 neurons in the hidden layer was selected for the present investigation. The tan sigmoid and purelin transfer function were used in the hidden and the output layers of the proposed network, respectively. The model predicted and experimental values of the percent Pb(II) removal were also compared and both the values were found to be in reasonable agreement with each other. The performance of the developed network was further improved by normalizing the experimental data set and it was found that after normalization, the MSE and validation error were reduced significantly. The sensitivity analysis was also performed to determine the most significant input parameter.     

Effluent characterization and different modes of reuse in agriculture—a model case study

Background, aim, and scope  

High-quality waters are steadily retreating worldwide. Discharge of industrial effluent in the environment again declines soil/water quality to a great extent. On the other hand, effluent reuse in agriculture could be a means to conserve natural resources by providing assured water supply for growing crops. But industrial effluents are highly variable in nature, containing a variety of substances, and all are not favorable for farming. Appraisal and developing modes of effluent reuse is therefore a prerequisite to enable its proper use in agriculture. Effluents of various industries were assessed and approaches for their use in farming were developed for a particular region in this study. As per availability of effluents, the same could be implemented in other water-scarce areas.     

Effect of vermicomposting on calcium, sulphur and some heavy metal content of different biodegradable organic wastes under liming and microbial inoculation

A study was conducted to evaluate the changes in total calcium and sulphur and some heavy metal (Zn, Cu, and Pb) concentration of different organic wastes affected by liming and microorganism inoculation. Vermicomposting was an effective technology for disposal of organic substrates like municipal solid wastes (MSW), possessing comparatively higher concentration of heavy metals. The addition of lime in initial organic substrates significantly (P ≤ 0.05) increased total calcium and total sulphur content of vermicomposts. Inoculation of microorganisms significantly (P ≤ 0.05) reduced the heavy metal content of final products as compared to control. Fungal strains were comparatively more effective in detoxification of heavy metals than B. polymyxa.     

Exploitation of iron ore tailing for the development of ceramic tiles

India ranks as the sixth largest producer of iron ore in the world. The current practice of washing iron ore in India generates as high as 18 million tonnes of tailings per year. These tailings are stored in massive ponds and pose environmental hazards. Safe disposal or utilisation of these materials thus remains a challenging task for the iron ore industry in India. The present paper describes a new development in managing these tailings by converting them into value added products such as ceramic floor and wall tiles for building application. These tiles have high strength and hardness compared to conventional tiles and conform to most of the EN standards. Energy economy and lower production costs are some other benefits.     

Fractionation and speciation of arsenic in three tea gardens soil profiles and distribution of As in different parts of tea plant (Camellia sinensis L.)

The distribution pattern and fractionation of arsenic (As) in three soil profiles from tea (Camellia sinensis L.) gardens located in Karbi-Anglong (KA), Cachar (CA) and Karimganj (KG) districts in the state of Assam, India, were investigated depth-wise (0-10, 10-30, 30-60 and 60-100 cm). DTPA-extractable As was primarily restricted to surface horizons. Arsenic speciation study showed the presence of higher As(V) concentrations in the upper horizon and its gradual decrease with the increase in soil depths, following a decrease of Eh. As fractionation by sequential extraction in all the soil profiles showed that arsenic concentrations in the three most labile fractions (i.e., water-soluble, exchangeable and carbonate-bound fractions) were generally low. Most arsenic in soils was nominally associated with the organic and Fe-Mn oxide fractions, being extractable in oxidizing or reducing conditions. DTPA-extractable As (assumed to represent plant-available As) was found to be strongly correlated to the labile pool of As (i.e. the sum of the first three fractions). The statistical comparison of means (two-sample t-test) showed the presence of significant differences between the concentrations of As(III) and As(V) for different soil locations, depths and fractions. The risk assessment code (RAC) was found to be below the pollution level for all soils. The measurement of arsenic uptake by different parts of tea plants corroborated the hypothesis that roots act as a buffer and hold back contamination from the aerial parts.