Growing season total gaseous mercury (TGM) flux measurements over an Acer rubrum L. stand

Relaxed eddy accumulation (REA) measurements of the total gaseous mercury (TGM) flux measurements were taken over a deciduous forest predominantly composed of Red Maple (Acer rubrum L.) during the growing season of 2004 and the second half of the growing season of 2005. The magnitudes of the flux estimates were in the range of published results from other micrometeorological mercury fluxes taken above a tall canopy and larger than estimates from flux chambers. The magnitude and direction of the flux were not static during the growing season. There was a significant trend (p < 0.001), from net deposition of TGM in early summer to net evasion in the late summer and early fall before complete senescence. A growing season atmosphere-canopy total mercury (TGM) compensation point during unstable daytime conditions was estimated at background ambient concentrations (1.41 ng m^?3). The trend in the seasonal net TGM flux indicates that long term dry deposition monitoring is needed to accurately estimate mercury loading over a forest ecosystem.     

Demolish it and They Will Come: Estimating the Economic Impacts of Restoring a Recreational Fishery1

Abstract: This paper presents the results of an ex post survey of recreational anglers for the lower Kennebec River, post‐Edwards Dam removal. To the best of our knowledge, this study represents one of the first ex post analyses of fisheries restoration from dam removal. We find significant benefits have accrued to anglers using the restored fishery. Specifically, anglers are spending more to visit the fishery, a direct indication of the increased value anglers place on the improved fishery. Anglers are also willing to pay for increased angling opportunities on the river. These findings have policy implications for other privately owned dams that are currently undergoing relicensing and/or dam removal considerations. Our findings may also hold implications for fisheries that have deteriorated due to historic dam construction.     

Load maximization of a liquid-solid circulating fluidized bed bioreactor for nitrogen removal from synthetic municipal wastewater

A novel liquid-solid circulating fluidized bed bioreactor (LSCFB) configured with anoxic and aerobic columns and lava rock as the biofilm carrier was used to treat synthetic municipal wastewater. Four different empty bed contact times (EBCTs) of 0.82, 0.65, 0.55, and 0.44 h were examined to optimize nutrient removal capability of the system. The LSCFB demonstrated tertiary effluent quality organic and nitrogen removal efficiencies. Effluent characteristics of the LSCFB were soluble biological oxygen demand (SBOD)10 mg l(-1) and total nitrogen (TN)<10 mg l(-1) at organic loading rate (OLR) of 5.3 kg m(-3)d(-1) and nitrogen loading rate of 0.54 kg Nm(-3)d(-1). Remarkably low yields of 0.14, 0.17, 0.19, and 0.21 g VSS g(-1)COD were observed at OLR of 2.6, 3.2, 4.1 and 5.3 kg COD m(-3)d(-1), where increment of biomass growth and detachment rate were also experienced with increasing OLR. However the system demonstrated only 30% phosphorus removal, and mass balances along the anoxic and aerobic columns showed biological phosphorus removal in the system. Organic mass balance showed that approximately 40% of the influent COD was utilized in the anoxic column and the remaining COD was oxidized in the aerobic column. The system is very efficient in nitrification-denitrification, with more than 90% nitrification of ammonium and overall nitrogen removal in the LSCFB was 70+/-11% even at an EBCT of 0.44 h.     

Real-world in-use activity, fuel use, and emissions for nonroad construction vehicles: a case study for excavators

A study design was developed and demonstrated for deployment of a portable emission measurement system (PEMS) for excavators. Excavators are among the most commonly used vehicles in construction activities. The PEMS measured nitric oxide, carbon monoxide, hydrocarbons, carbon dioxide, and opacity-based particulate matter. Data collection, screening, processing, and analysis protocols were developed to assure data quality and to quantify variability in vehicle fuel consumption and emissions rates. The development of data collection procedures was based on securing the PEMS while avoiding disruption to normal vehicle operations. As a result of quality assurance, approximately 90% of the attempted measurements resulted in valid data. On the basis of field data collected for three excavators, an average of 50% of the total nitric oxide emissions was associated with 29% of the time of operation, during which the average engine speed and manifold absolute pressure were significantly higher than corresponding averages for all data. Mass per time emission rates during non-idle modes (i.e., moving and using bucket) were on average 7 times greater than for the idle mode. Differences in normalized average rates were influenced more by intercycle differences than intervehicle differences. This study demonstrates the importance of accounting for intercycle variability in real-world in-use emissions to develop more accurate emission inventories. The data collection and analysis methodology demonstrated here is recommended for application to more vehicles to better characterize real-world vehicle activity, fuel use, and emissions for nonroad construction equipment.     

Characterization of real-world activity, fuel use, and emissions for selected motor graders fueled with petroleum diesel and B20 biodiesel

Motor graders are a common type of nonroad vehicle used in many road construction and maintenance applications. In-use activity, fuel use, and emissions were measured for six selected motor graders using a portable emission measurement system. Each motor grader was tested with petroleum diesel and B20 biodiesel. Duty cycles were quantified in terms of the empirical cumulative distribution function of manifold absolute pressure (MAP), which is an indicator of engine load. The motor graders were operated under normal duty cycles for road maintenance and repair at various locations in Wake and Nash Counties in North Carolina. Approximately 3 hr of quality-assured, second-by-second data were obtained during each test. An empirical modal-based model of vehicle fuel use and emissions was developed, based on stratifying the data with respect to ranges of normalized MAP, to enable comparisons between duty cycles, motor graders, and fuels. Time-based emission factors were found to increase monotonically with MAP. Fuel-based emission factors were mainly sensitive to differences between idle and non-idle engine operation. Cycle average emission factors were estimated for road "resurfacing," "roading," and "shouldering" activities. On average, the use of B20 instead of petroleum diesel leads to a negligible decrease of 1.6% in nitric oxide emission rate, and decreases of 19-22% in emission rates of carbon monoxide, hydrocarbons, and particulate matter. Emission rates decrease significantly when comparing newer engine tier vehicles to older ones. Significant reductions in tailpipe emissions accrue especially from the use of B20 and adoption of newer vehicles.     

Methods for quantifying variability and uncertainty in AP-42 emission factors: case studies for natural gas-fueled engines

Quantitative methods for characterizing variability and uncertainty were applied to case studies of oxides of nitrogen and total organic carbon emission factors for lean-burn natural gas-fueled internal combustion engines. Parametric probability distributions were fit to represent inter-engine variability in specific emission factors. Bootstrap simulation was used to quantify uncertainty in the fitted cumulative distribution function and in the mean emission factor. Some methodological challenges were encountered in analyzing the data. For example, in one instance, five data points were available, with each data point representing a different market share. Therefore, an approach was developed in which parametric distributions were fitted to population-weighted data. The uncertainty in mean emission factors ranges from as little as approximately +/-10% to as much as -90 to +180%. The wide range of uncertainty in some emission factors emphasizes the importance of recognizing and accounting for uncertainty in emissions estimates. The skewness in some uncertainty estimates illustrates the importance of using numerical simulation approaches that do not impose restrictive symmetry assumptions on the confidence interval for the mean. In this paper, the quantitative method, the analysis results, and key findings are presented.     

Electrolytic treatment of an industrial wastewater from a hosiery plant.

Textile plant wastewater being treated in a facultative pond system had too high of a solids concentration to be reused in the dying and rinsing processes. Electrocoagulation was evaluated to further treat the pond effluent to remove turbidity, which was caused by dyes and microorganisms. A range of amperages were tested for removal of turbidity and chemical oxygen demand (COD). Electrocoagulation lowered the turbidity from 1400 NTU to below 50 NTU; and COD was lowered from 550 mg/L to approximately 250 mg/L, which was acceptable for reuse. In addition, a laboratory-scale sedimentation study was conducted on the electrocoagulated pond effluent, which indicated that a settling time of 35 minutes would provide for 80% removal of suspended solids, which was acceptable for reuse of the water in plant processes.     

Visible and microscopic injury in leaves of five deciduous tree species related to current critical ozone levels

Because the current critical level of ozone (O(3)) for forest trees is based only on one species, the responses of five deciduous tree species were differentiated in a climate chamber experiment. The number of symptomatic leaves per tree was significantly increased, and stomatal conductance was decreased under 50% ambient+30 nl l(-1) O(3) as compared to 'normal' senescence at 50% ambient [O(3)]. Species with a high stomatal conductance did not show earlier or more leaf injury symptoms. The additional 30 nl l(-1) O(3) induced specific pectinaceous cell wall protrusions, phenolic cell wall incrustations, tonoplast vesicles, and inhomogeneous, condensed/precipitated phenolic material in the vacuoles. Due to added O(3), cell senescence was accelerated with increased electron-density of the cytoplasm, and initial chloroplast degeneration. The slow degeneration process started in mesophyll cells, and expanded into epidermal and finally guard cells. Because of the large variance in biomass between individuals and species, the current critical level is supported by the assessment of visible leaf symptoms rather than growth reduction.     

Biogenic and contaminant heavy metal pollution in Estonian coniferous forests

Regional Environmental Change - Estonia is the only country in Europe that is actively mining oil shale. Oil-shale-burning power plants have been and still are the main sources of heavy metals in...     

Practitioner insights as a means of setting a context for conservation

A key obstacle to conservation success is the tendency of conservation professionals to tackle each challenge individually rather than collectively and in context. We sought to prioritize barriers to conservation previously described in the conservation literature. We undertook an online survey of 154 practitioners from over 70 countries to ascertain the most important barriers to conservation they faced. We used statistical analyses to identify the key impediments to conservation success and to examine whether these were affected by organizational attributes. Twenty-one barriers were identified. The importance ascribed to those was influenced by continent of operation and organization size, but not by organization age or autonomy (from larger parent organizations). We found the most important barriers to consider when undertaking conservation action were wider issues (e.g., population growth, consumerism, favoring development, and industrial-scale activity), operating environment (e.g., lack of political will, ineffective law enforcement, weak governments, corruption, safety and security), community attributes (e.g., dynamics, conflicts, and education levels), and the way conservation is undertaken (overconfidence, lack of funding, and externally set agendas). However, we advise against applying a one-size-fits-all approach. We propose that conservationists account for the complex socioecological systems they operate in if they are to achieve success.