Alkali borosilicate glass by fly ash from a coal-fired power plant

The possibility of using coal fly ash as a silica source for alkali borosilicate glass was investigated. Alkali borosilicate glasses were prepared from the coal fly ash mixed with 30 wt.% reagents composed of Na(2)O and B(2)O(3) by susceptor-induction heating. Their densities ranged from 2.24 to 2.55 g cm(-3) and decreased as the amount of B(2)O(3) addition increased. However, the Vickers microhardness showed a different tendency with the density since the glass network connectivity improved by boron anomaly, which was identified by a nuclear magnetic resonance analysis. The Vickers microhardness of the glass product, with the addition of 15 wt.% B(2)O(3) and 15 wt.% Na(2)O, was about 4030 MPa. Furthermore, the changes in microstructure were consistent with those in the chemical stability by the toxicity characteristic leaching procedure (TCLP).     

Optimization of hydrogen distribution systems with pressure constraints

Hydrogenation units are often operated at high pressure, requiring the use of compressors which are one of the most expensive chemical processing equipment. Optimizing a hydrogen network should therefore take into consideration not only purity and flowrate constraints but also pressure requirements. In this paper, based on the hydrogen surplus diagram approach, the average pressure profiles of hydrogen sources and sinks are proposed through the introduction of a system’s minimum pressure drop Δp. Combined with the traditional purity profiles, whether a source can meet a sink either for hydrogen concentration or for pressure requirements can be determined intuitively. In cases where the pressure of a source is not sufficient for a sink, installing a hydrogen compressor or using another source with higher purity and pressure could be potential solutions. A cost equation is established to determine which of the two solutions is economically more viable. For different matching situations between sources and sinks, strategies for optimum placement of compression equipment within a given hydrogen network are proposed. A case study is used to illustrate the application and effectiveness of the proposed method.     

APPLICATION OF GREY MODEL AND ARTIFICIAL NEURAL NETWORKS TO FLOOD FORECASTING1

The main focus of this study was to compare the Grey model and several artificial neural network (ANN) models for real time flood forecasting, including a comparison of the models for various lead times (ranging from one to six hours). For hydrological applications, the Grey model has the advantage that it can easily be used in forecasting without assuming that forecast storm events exhibit the same stochastic characteristics as the storm events themselves. The major advantage of an ANN in rainfall‐runoff modeling is that there is no requirement for any prior assumptions regarding the processes involved. The Grey model and three ANN models were applied to a 2,509 km² watershed in the Republic of Korea to compare the results for real time flood forecasting with from one to six hours of lead time. The fifth‐order Grey model and the ANN models with the optimal network architectures, represented by ANN1004 (34 input nodes, 21 hidden nodes, and 1 output node), ANN1010 (40 input nodes, 25 hidden nodes, and 1 output node), and ANN1004T (14 input nodes, 21 hidden nodes, and 1 output node), were adopted to evaluate the effects of time lags and differences between area mean and point rainfall. The Grey model and the ANN models, which provided reliable forecasts with one to six hours of lead time, were calibrated and their datasets validated. The results showed that the Grey model and the ANN1010 model achieved the highest level of performance in forecasting runoff for one to six lead hours. The ANN model architectures (ANN1004 and ANN1010) that used point rainfall data performed better than the model that used mean rainfall data (ANN1004T) in the real time forecasting. The selected models thus appear to be a useful tool for flood forecasting in Korea.     

Building institutions based on information disclosure: lessons from GRI's sustainability reporting

Global Reporting Initiative (GRI) is the best-known framework for voluntary reporting of environmental and social performance by business worldwide. Using extensive empirical data, including interviews and documentary analysis, we examine GRI's organizational field and conclude that since its modest beginnings in 1999 GRI has been by several measures a successful institutionalization project. But the institutional logic of this new entity, as an instrument for corporate sustainability management, leaves out one of the central elements of the initial vision for GRI: as a mobilizing agent for many societal actors. This emergent logic reflects GRI's dominant constituency – large global companies and financial institutions and international business management consultancies – and not the less active civil society organizations and organized labor. We attribute these developments to factors such as building GRI within the existing institutional structures; the highly inclusive multistakeholder process; and the underdeveloped base of information users. From the institutional theory perspective, this case shows how the process of institutionalization is deeply affected by initial strategies of the founders, and how it reproduces existing power relations. From the governance perspective, this case leads us to question the power of commodified information to mobilize civil society and to strengthen governance based on partnerships.     

Complex host marking in the cabbage root fly

Summary. The cabbage root fly marks an oviposition site with two different chemical messages. Plants that were exposed to ovipositing flies are less acceptable than control plants, while sand particles that were closely associated with an actual oviposition site stimulate oviposition. By combining the information from these opposing messages, the cabbage root fly may be able to optimise the size of its egg clusters in relation to the food available for the larvae. The findings might account for the aggregated oviposition observed in this species.     

Relationship of PCDD/Fs congener profiles between beef and raw milk in South Korea

The relationship between profiles of residual PCDD/Fs in beef and raw milk was examined by measuring concentrations and detected frequencies. Unrelated samples of beef and raw milk were collected from nine regions in South Korea. Congener-specific profiles of PCDD/Fs in beef and raw milk were very similar. PCDFs, particularly 2,3,4,7,8-PeCDF, 1,2,3,4,7,8-HxCDF, 1,2,3,6,7,8-HxCDF, and 2,3,4,6,7,8-HxCDF, were dominant congeners in both beef and raw milk suggesting that sources of contamination may not significantly differ nationwide. The profiles of PCDD/Fs in domestic beef and raw milk in this study were closer to the profiles of emission from metal industries although Korea imports over 75% of feedingstuffs. The ratios of PCDF/PCDD in TEQ concentration were more than 5 and 15 in beef and raw milk, respectively. The mean concentrations of PCDD/Fs in 60 samples of beef and 60 samples of raw milk were 0.80 pg WHO-TEQ/g fat and 0.65 pg WHO-TEQ/g fat, respectively. The residual profiles of PCDD/Fs in raw milk resembled that in beef although the congener profiles might change throughout the food chain. This indicated that monitoring of dioxins in milk could provide information for contamination of milk itself or other associated food.     

Background levels and dietary intake of PCDD/Fs in domestic and imported meat in South Korea

A survey was conducted in South Korea to determine residual levels and dietary intake of polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) from meat. Altogether 119 domestic and 164 imported samples of beef, pork, and chicken were examined. The mean levels of PCDD/Fs in upper bound were 0.21, 0.22, and 0.04pg WHO-TEQ/g fat for beef, pork, and chicken, respectively. The low level of PCDD/Fs in chicken probably resulted from the low fat content in the samples used. The samples were separated into domestic and imported products in order to investigate the sources of contamination. PCDFs were the more dominant congeners in domestic beef and were similar to those found from emission of incineration. However, the congener profiles of domestic beef and incineration were difficult to compare because the environmental fate and animal metabolism were involved. The upper bound dietary intake of PCDD/Fs from beef, pork and chicken was calculated to be 0.04pg/WHO-TEQ/kgbw/day. The combined consumption of beef, pork, and chicken was found to be 84.8g per day for a person weighing 60kg and represented 5.7% of their total daily food intake.     

Reliable evidences that the removal mechanism of hexavalent chromium by natural biomaterials is adsorption-coupled reduction

For the last few decades, over 200 papers have been published in the Cr(VI) biosorption research field. Most early studies have claimed that Cr(VI) was removed from aqueous phase through an anionic adsorption, but this approach has been lost old original position. It has been newly explained that these findings were misinterpreted due to errors in measuring the concentrations of different chromium species in the aqueous phase, insufficient contact time required for equilibrium and the lack of information about the oxidation state of the chromium bound to biomaterials. Although 'adsorption-coupled reduction' is now widely accepted as the mechanism of Cr(VI) biosorption by natural biomaterials, a number of researchers still believe that Cr(VI) is removed by anionic adsorption onto the biomaterials. Therefore, the objective of this study was to show reliable evidences that the removal mechanism of Cr(VI) by natural biomaterials is 'adsorption-coupled reduction'. Sixteen natural biomaterials were used to study the Cr(VI) biosorption. Not only Cr(VI) but also total Cr in the aqueous phase were analyzed. X-ray photoelectron spectroscope was also used to verify the oxidation state of the chromium bound to the biomaterials. Finally, the removal behavior of Cr(VI) by each biomaterial was described by a kinetic model based on a redox reaction.     

Closed cycle construction: an integrated process for the separation and reuse of C&D waste

In The Netherlands, construction and demolition (C&D) waste is already to a large extent being reused, especially the stony fraction, which is crushed and reused as a road base material. In order to increase the percentage of reuse of the total C&D waste flow to even higher levels, a new concept has been developed. In this concept, called 'Closed Cycle Construction', the processed materials are being reused at a higher quality level and the quantity of waste that has to be disposed of is minimised. For concrete and masonry, the new concept implies that the material cycle will be completely closed, and the original constituents (clay bricks, gravel, sand, cement stone) are recovered in thermal processes. The mixed C&D waste streams are separated and decontaminated. For this purpose several dry separation techniques are being developed. The quality of the stony fraction is improved so much, that this fraction can be reused as an aggregate in concrete. The new concept has several benefits from a sustainability point of view, namely less energy consumption, less carbon dioxide emission, less waste production and less land use (for excavation and disposal sites). One of the most remarkable benefits of the new concept is that the thermal process steps are fuelled with the combustible fraction of the C&D waste itself. Economically the new process is more or less comparable with the current way of processing C&D waste. On the basis of the positive results of a feasibility study, currently a pilot and demonstration project is being carried out. The aim is to optimise the different process steps of the Closed Cycle Construction process on a laboratory scale, and then to verify them on a large scale. The results of the project are promising, so far.     

The influence of odour on the oviposition behaviour of the cabbage root fly

Summary. Host plant odours are known to be important in long-range host location by the cabbage root fly, whereas at short distances orientation is mainly visual. We show that olfaction also plays a significant role after a fly lands on a plant and before it moves down onto the soil to oviposit. Host plant acceptance by the cabbage root fly seems to result from a synergistic response to simultaneously perceived olfactory and contact chemostimulation. Received 12 May 1999; accepted 24 July 1999