Application methods affect phosphorus-induced lead immobilization from a contaminated soil

Phosphate rock (PR) and phosphoric acid (PA) are an effective combination of P sources for immobilizing Pb in contaminated soils. This column experiment examined the effectiveness of different application methods on Pb immobilization in a contaminated soil. Phosphate was applied at a P/Pb molar ratio of 4 with half as PR and half PA. While PR was mixed with the soil or placed as a layer, aqueous PA was applied from the top of the column as one or two applications. After 4 wk of incubation, total and soluble Pb and P, TCLP-Pb (toxicity characteristic leaching procedure) and PBET-Pb (physiologically-based extraction test) in the P-treated soil were determined. Phosphate addition effectively reduced leachable Pb to below the EPA drinking water standard of 15 microg L(-1) in all treatments. Mixing both PA and PR with the soil was the most effective method in Pb immobilization, reducing TCLP-Pb by up to 95% and PBET-Pb by 25 to 42%. Application of PR as a layer in the soil column was the most effective in reducing Pb migration (by 73-79%) and minimizing soil acidification and P entrophication, potential drawbacks of PA. Applying PA in two applications was less effective than one application. Mixing PR and PA with the soil plus placing PR as a layer can be employed for effective remediation of Pb-contaminated soils, reducing Pb leachability, bioavailability, and mobility while minimizing soil acidification and P entrophication.     

Vegetation roles on changes of soil properties and microbial activities in a coastal sand dune. A case study

The vegetation effects on changes of soil physicochemical properties and microbial activities in the costal sand dune were investigated to understand the roles of vegetation on sand dune ecosystem. Eight sites from six vegetation zones and two bare zones in the dune front, dune crest, and dune back regions were selected. Soil microbial enzyme activities of β-glucosidase, acid phosphatase, arylsulfatase, and dehydrogenase, and soil physicochemical properties of each site were evaluated. The results showed that all the enzyme activities were higher in the mixed vegetation sites with native sand dune plants and naturalized plants and in Pinus thunbergii community site both located in the dune back regions where the accumulation of organic matter and nitrogen were more prominent. The results demonstrated that soil organic matter and nutrients are the primary determinants of the microbial activity in sand dune where are exposed to a gradient of physicochemical stress such as high salinity, moisture and salt spray. Therefore, the conservation of vegetation that generates more soil organic matter and nutrients is important factor in controlling the soil microbial activities and biogeochemical cycles in the coastal sand dune systems.     

Using internet search behavior to assess public awareness of protected wetlands

Improving public awareness of protected wetlands facilitates sustainable wetland management, which depends on public participation. One way of gauging public interest is by tracking Internet search behavior (ISB). We assessed public awareness of issues related to protected wetland areas (PWAs) in South Korea by examining the frequencies of specific queries (PWAs, Ramsar, Upo wetland, Sunchon Bay, etc.) using relative search volumes (RSVs) obtained from an Internet search engine. RSV shows how many times a search term is used relative to a second search term during a specific period. Public awareness of PWAs changed from 2007 to 2013. Initially the majority of Internet searches were related to the most well‐known tidal and inland wetlands Sunchon Bay and Upo wetlands, which are the largest existing wetlands in Korea with the greatest historical exposure. Public awareness, as reflected in RSVs, of wetlands increased significantly following PWA designation for the wetlands in 2008, which followed the Ramsar 10th Conference of Contracting Parties to the Convention on Wetlands (COP10) meeting. Public interest was strongly correlated to the number of news articles in the popular media, as evidenced by the increase in Internet searches for specific wetlands and words associated with specific wetlands. Correspondingly, the number of visitors to specific wetlands increased. To increase public interest in wetlands, wetland aspects that enhance wetland conservation should be promoted by the government and enhanced via public education. Our approach can be used to gauge public awareness and participation in a wide range of conservation efforts.     

Grazing management effects on sediment, phosphorus, and pathogen loading of streams in cool-season grass pastures

Erosion and runoff from pastures may lead to degradation of surface water. A 2-yr grazing study was conducted to quantify the effects of grazing management on sediment, phosphorus (P), and pathogen loading of streams in cool-season grass pastures. Six adjoining 12.1-ha pastures bisected by a stream in central Iowa were divided into three treatments: continuous stocking with unrestricted stream access (CSU), continuous stocking with restricted stream access (CSR), and rotational stocking (RS). Rainfall simulations on stream banks resulted in greater ( < 0.10) proportions of applied precipitation and amounts of sediment and P transported in runoff from bare sites than from vegetated sites across grazing treatments. Similar differences were observed comparing vegetated sites in CSU and RS pastures with vegetated sites in CSR pastures. Bovine enterovirus was shed by an average of 24.3% of cows during the study period and was collected in the runoff of 8.3 and 16.7% of runoff simulations on bare sites in CSU pastures in June and October of 2008, respectively, and from 8.3% of runoff simulations on vegetated sites in CSU pastures in April 2009. Fecal pathogens (bovine coronavirus [BCV], bovine rotavirus group A, and O157:H7) shed or detected in runoff were almost nonexistent; only BCV was detected in feces of one cow in August of 2008. Erosion of cut-banks was the greatest contributor of sediment and P loading to the stream; contributions from surface runoff and grazing animals were considerably less and were minimized by grazing management practices that reduced congregation of cattle by pasture streams.     

Morphology and sinking velocities of fecal pellets of copepod, molluscan, euphausiid, and salp taxa in the northeastern tropical Atlantic

Morphological characteristics and sinking velocities of naturally occurring fecal pellets of copepods, euphausiids, salps, and pelagic mollusks collected in the northeastern tropical Atlantic were investigated during the period of May-June 1992. The fecal pellets of copepods and euphausiids were cylindrical and distinguished only by their size. Those of salps were, in general, rectangular, and slight differences were noted according to the species. The fecal pellets of the molluscan pteropod Clio sp. were conical, while those of the molluscan heteropod Carinaria sp. were spiral. The sinking velocities ranged from 26.5 to 159.5 m day^-1 for copepod fecal pellets, from 16.1 to 341.1 m day^-1 for euphausiid pellets, from 43.5 to 1167.6 m day^-1 for salps' pellets (Cyclosalpa affinis, Salpa fusiformis, Iasis zonaria, and two unidentified species), from 65 to 205.7 m day^-1 for Clio sp. pellets, and from 120.3 to 646.4 m day^-1 for Carinaria sp. fecal pellets. The measured sinking velocities were compared with estimates predicted using the equations of Komar et al. (1981; Limnol Oceanogr 26:172-180), Stokes' law, and Newton's second law, using either a constant density of fecal pellets (1.22 g cm^-3) or densities estimated with the three different equations. When a constant density was used, the three equations overestimated the sinking velocities; Stokes' law resulted in the largest overestimation, and Newton's second law, the smallest. At the taxa level, the overestimation was greatest for euphausiid 1 fecal pellets and smallest for copepod fecal pellets. When the three equations were used to estimate fecal pellet density, the density estimated using the equation of Komar et al. was the greatest, and that using Stokes' law, the smallest, resulting in over- and underestimation of sinking velocities, respectively. Newton's second law resulted in an intermediate density and gave the closest estimate of sinking velocities. We propose that measurement of sinking velocities of a portion of the fecal pellets might guide in choosing an appropriate equation to be used for a reasonable interpretation of vertical mass flux.     

Effect of industrial by-products containing electron acceptors on mitigating methane emission during rice cultivation

Three industrial by-products (fly ash, phosphogypsum and blast furnace slag), were evaluated for their potential re-use as soil amendments to reduce methane (CH₄) emission resulting from rice cultivation. In laboratory incubations, CH₄ production rates from anoxic soil slurries were significantly reduced at amendment levels of 0.5%, 1%, 2% and 5% (wt wt⁻¹), while observed CO₂ production rates were enhanced. The level of suppression in methane production was the highest for phosphogypsum, followed by blast slag and then fly ash. In the greenhouse experiment, CH₄ emission rates from the rice planted potted soils significantly decreased with the increasing levels (2–20 Mg ha⁻¹) of the selected amendments applied, while rice yield simultaneously increased compared to the control treatment. At 10 Mg ha⁻¹ application level of the amendments, total seasonal CH₄ emissions were reduced by 20%, 27% and 25%, while rice grain yields were increased by 17%, 15% and 23% over the control with fly ash, phosphogypsum, and blast slag amendments, respectively. The suppression of CH₄ production rates as well as total seasonal CH₄ flux could be due to the increased concentrations of active iron, free iron, manganese oxides, and sulfate in the amended soil, which acted as electron acceptors and controlled methanogens’ activity by limiting substrates availability. Among the amendments, blast furnace slag and fly ash contributed mainly to improve the soil nutrients balance and increased the soil pH level towards neutral point, but soil acidity was developed with phosphogypsum application. Conclusively, blast slag among the selected amendments would be a suitable soil amendment for reducing CH₄ emissions as well as sustaining rice productivity.     

Mechanism for the stabilization/solidification of arsenic-contaminated soils with Portland cement and cement kiln dust

In this study, the mechanism for the stabilization/solidification (S/S) of arsenic (As)-contaminated soils with Portland cement (PC), and cement kiln dust (CKD) using 1 N HCl extraction fluid, X-ray powder diffraction (XRPD), X-ray absorption near edge structure (XANES) and Extended X-ray absorption fine structure (EXAFS) spectroscopy was investigated. The degree of As immobilization after stabilization was assessed using a 1 N HCl extraction on the basis of the Korean Standard Test (KST). After 1 day of curing with 30 wt% PC and 7 days of curing with 50 wt% CKD, the concentration of As leached from the amended soils was less than the Korean countermeasure standard (3 mg L^?1). The As concentrations in the leachate treated with PC and CKD were significantly decreased at pH > 3, indicating that pH had a prevailing influence on As mobility. XRPD results indicated that calcium arsenite (Ca–As–O) and sodium calcium arsenate hydrate (NaCaAsO₄·7.5H₂O) were present in the PC- and CKD-treated slurries as the key phases responsible for As(III) and As(V) immobilization, respectively. The XANES spectroscopy confirmed that the As(III) and As(V) oxidation states of the PC and CKD slurry samples were consistent with the speciated forms in the crystals identified by XRPD. EXAFS spectroscopy showed As–Ca bonding in the As(III)-PC and As(III)-CKD slurries. The main mechanism for the immobilization of As-contaminated soils with PC and CKD was strongly associated with the bonding between As(III) or As(V) and Ca.     

In vivo evaluation and comparison of developmental toxicity and teratogenicity of perfluoroalkyl compounds using Xenopus embryos

Perfluoroalkyl compounds (PFCs) are environmental toxicants that persistently accumulate in human blood. Their widespread detection and accumulation in the environment raise concerns about whether these chemicals might be developmental toxicants and teratogens in ecosystem. We evaluated and compared the toxicity of PFCs of containing various numbers of carbon atoms (C8–11 carbons) on vertebrate embryogenesis. We assessed the developmental toxicity and teratogenicity of various PFCs. The toxic effects on Xenopus embryos were evaluated using different methods. We measured teratogenic indices (TIs), and investigated the mechanisms underlying developmental toxicity and teratogenicity by measuring the expression of organ-specific biomarkers such as xPTB (liver), Nkx2.5 (heart), and Cyl18 (intestine). All PFCs that we tested were found to be developmental toxicants and teratogens. Their toxic effects were strengthened with increasing length of the fluorinated carbon chain. Furthermore, we produced evidence showing that perfluorodecanoic acid (PFDA) and perfluoroundecanoic acid (PFuDA) are more potent developmental toxicants and teratogens in an animal model compared to the other PFCs we evaluated [perfluorooctanoic acid (PFOA) and perfluorononanoic acid (PFNA)]. In particular, severe defects resulting from PFDA and PFuDA exposure were observed in the liver and heart, respectively, using whole mount in situ hybridization, real-time PCR, pathologic analysis of the heart, and dissection of the liver. Our studies suggest that most PFCs are developmental toxicants and teratogens, however, compounds that have higher numbers of carbons (i.e., PFDA and PFuDA) exert more potent effects.     

Thermal and Biodegradable Properties of Poly(<Emphasis Type="SmallCaps">l</Emphasis>-lactide)/Poly(ε-Caprolactone) Compounded with Functionalized Organoclay

Poly(l-lactide) (PLLA)/Poly(ε-caprolactone) (PCL) blends were compounded with commercially available organoclay Cloisite 25A (C25A) and C25A functionalized with epoxy groups, respectively. Epoxy groups on the surface of C25A were introduced by treating C25A with (glycidoxypropyl)trimethoxy silane (GPS) to produce so called Functionalized Organoclay (F-C25A). The silicate layers of PLLA/PCL/F-C25A were exfoliated to a larger extent than PLLA/PCL/C25A. Incorporation of the epoxy groups on C25A improved significantly mechanical properties of PLLA/PCL/C25A. The larger amount of exfoliation of the silicate layers in PLLA/PCL/F-C25A as compared with that in PLLA/PCL/C25A was attributed to the increased interfacial interaction between the polyesters and the clay due to chemical reaction. Thermo gravimetric analysis revealed that the nanocomposites with exfoliated silicate layers were more thermally stable than those with intercalated silicate layers. The biodegradability of the neat PLLA/PCL and corresponding nanocomposite was studied under compost, and the rate of biodegradation of PLLA/PCL increased after nanocomposite preparation.     

Economic and environmental optimization of a multi-site utility network for an industrial complex

Most chemical companies consume a lot of steam, water and electrical resources in the production process. Given recent record fuel costs, utility networks must be optimized to reduce the overall cost of production. Environmental concerns must also be considered when preparing modifications to satisfy the requirements for industrial utilities, since wastes discharged from the utility networks are restricted by environmental regulations. Construction of Eco-Industrial Parks (EIPs) has drawn attention as a promising approach for retrofitting existing industrial parks to improve energy efficiency. The optimization of the utility network within an industrial complex is one of the most important undertakings to minimize energy consumption and waste loads in the EIP.In this work, a systematic approach to optimize the utility network of an industrial complex is presented. An important issue in the optimization of a utility network is the desire of the companies to achieve high profits while complying with the environmental regulations. Therefore, the proposed optimization was performed with consideration of both economic and environmental factors.The proposed approach consists of unit modeling using thermodynamic principles, mass and energy balances, development of a multi-period Mixed Integer Linear Programming (MILP) model for the integration of utility systems in an industrial complex, and an economic/environmental analysis of the results. This approach is applied to the Yeosu Industrial Complex, considering seasonal utility demands. The results show that both the total utility cost and waste load are reduced by optimizing the utility network of an industrial complex.