Arsenic exposure in Hungary, Romania and Slovakia

Inorganic arsenic is a potent human carcinogen and toxicant which people are exposed to mainly via drinking water and food. The objective of the present study was to assess current exposure to arsenic via drinking water in three European countries. For this purpose, 520 individuals from four Hungarian, two Slovakian and two Romanian countries were investigated by measuring inorganic arsenic and methylated arsenic metabolites in urine by high performance liquid chromatography with hydride generation and inductively coupled plasma mass spectrometry. Arsenic in drinking water was determined by atomic absorption spectrometry. Significantly higher concentrations of arsenic were found in both the water and the urine samples from the Hungarian counties (median: 11 and 15 microg dm(-3), respectively; p < 0.001) than from the Slovakian (median: 0.94 and 4.5 microg dm(-3), respectively) and Romanian (median: 0.70 and 2.1 microg dm(-3), respectively) counties. A significant correlation was seen between arsenic in water and arsenic in urine (R(2)= 0.46). At low water arsenic concentrations, the relative amount of dimethylarsinic acid (DMA) in urine was increased, indicating exposure via food. Also, high body mass index was associated with higher concentrations of arsenic in urine (p= 0.03), mostly in the form of DMA. Smokers had significantly higher urinary arsenic concentrations than non-smokers (p= 0.03). In conclusion, elevated arsenic exposure via drinking water was prevalent in some of the counties. Exposure to arsenic from food, mainly as DMA, and cigarette smoke, mainly as inorganic arsenic, are major determinants of arsenic exposure at very low concentrations of arsenic in drinking water.     

An Analysis of Secondary Pollutants in Buenos Aires City

Air pollutant concentrations from a monitoring campaign in Buenos Aires City, Argentina, are used to investigate the relationships between ambient levels of ozone (O₃), nitric oxide (NO) and nitrogen dioxide (NO₂) as a function of NO _x (=NO + NO₂). This campaign undertaken by the electricity sector was aimed at elucidating the apportionment of thermal power plants to air quality deterioration. Concentrations of carbon monoxide (CO) and sulphur dioxide (SO₂) were also registered. Photo stationary state (PSS) of the NO, NO₂, O₃ and peroxy radicals species has been analysed. The ‘oxidant’ level concept has been introduced, OX (=O₃ + NO₂), which varies with the level of NO _x . It is shown that this level is made up of NO _x -independent and NO _x -dependent contributions. The former is a regional contribution that equates the background O₃ level, whereas the latter is a local contribution that correlates with the level of primary pollution. Furthermore, the anticorrelation between NO₂ and O₃ levels, which is a characteristic of the atmospheric photo stationary cycle has been verified.The analysis of the concentration of the primary pollutants CO and NO strongly suggests that the vehicle traffic is the principal source of them. Levels of continuous measurements of SO₂ for Buenos Aires City are reported in this work as a complement of previously published results.     

Photocatalytic reduction of carbon dioxide over Cu/TiO<Subscript>2</Subscript> photocatalysts

The photocatalytic reduction of CO₂ with H₂O was investigated using Cu/TiO₂ photocatalysts in aqueous solution. For this purpose, Cu/TiO₂ photocatalysts (with 0.2, 0.9, 2, 4, and 6 wt.% of Cu) have been synthesized via sol-gel method. The photocatalysts were extensively characterized by means of inductively coupled plasma optical emission spectrometry (ICP-OES), N₂ physisorption (BET), XRD, UV-vis DRS, FT-IR, Raman spectroscopy, TEM-EDX, and photoelectrochemical measurements. The as-prepared photocatalysts contain anatase as a major crystalline phase with a crystallite size around 13 nm. By increasing the amount of Cu, specific surface area and band gap energy decreased in addition to the formation of large agglomeration of CuO. Results revealed that the photocatalytic reduction of CO₂ decreased in the presence of Cu/TiO₂ in comparison to pure TiO₂, which might be associated to the formation of CuO phase acting as a recombination center of generated electron-hole pair. Decreasing of photoactivity can also be connected with a very low position of conduction band of photocatalysts with high Cu content, which makes H₂ production necessary for CO₂ reduction more difficult.     

Periphyton Developed on Artificial Substrates: Effect of Substrate Type and Incubation Depth

The aim of this study was to assess the effect of substrate type and incubation depth on periphyton that had developed on artificial substrates. Uniform rectangular tiles made out of artificial substrates: glass, ceramic, willow tree and yew tree, were fixed on a floating buoy and deployed at three different depths in a photic zone of the Sava Lake (Belgrade, Serbia). Non-taxonomic attributes in the developed biofilm were estimated week-by-week from the start of the experiment in July, until its end in September 2014. Through assessment of substrate type and depth of incubation effect we concluded that these parameters for the fact influence periphyton development and composition. Glass was preferred by autotrophic component over ceramic and wooden substrates. In general, substrate type effect was diminished by increasing incubation depth. When non-taxonomic parameters are to be used in biomonitoring studies, our results suggest that glass substrate and shallow layer of water column (up to 50 cm) for incubation should be preferred.     

Effect of ferrate on green algae removal

Green algae Cladophora aegagropila, present in cooling water of thermal power plants, causes many problems and complications, especially during summer. However, algae and its metabolites are rarely eliminated by common removal methods. In this work, the elimination efficiency of electrochemically prepared potassium ferrate(VI) on algae from cooling water was investigated. The influence of experimental parameters, such as Fe(VI) dosage, application time, pH of the system, temperature and hydrodynamics of the solution on removal efficiency, was optimized. This study demonstrates that algae C. aegagropila can be effectively removed from cooling water by ferrate. Application of ferrate(VI) at the optimized dosage and under the suitable conditions (temperature, pH) leads to 100% removal of green algae Cladophora from the system. Environmentally friendly reduction products (Fe(III)) and coagulation properties favour the application of ferrate for the treatment of water contaminated with studied microorganisms compared to other methods such as chlorination and use of permanganate, where harmful products are produced.

     

Characterisation of secondary metal-bearing phases in used dental amalgam and assessment of gastric solubility

Detailed SEM/EDS investigation of used dental amalgams was carried out in order to characterise morphology and chemical composition of secondary metal-bearing phases resulting from long-term exposure of dental amalgam to oral environment, and assess their solubility in gastric environment. The investigation revealed numerous secondary phases, represented by compositionally and morphologically complex Hg-, Cu-, Sn-, Ag-, Zn-bearing sulphides and oxides/hydroxides, while sulphates and phosphates are scarce. Secondary metal-bearing phases mostly occur at the amalgam/tooth interface; however, some phases were found only on the occlusal surfaces of amalgam. Secondary phases mostly form porous aggregates of minute crystallites and micro- or nanocrystalline crusts. In oral environment, these phases are mostly stable and represent trapping media for dissolved potentially toxic metals released during amalgam corrosion. Simplified PHREEQC calculations of solubility of secondary metal-bearing phases in aqueous environment under conditions similar to those in gastric environment showed that secondary phases are more soluble in gastric environment than in oral solutions, which is mostly due to their forms of occurrence. Secondary phases in gastric environment thus act as secondary sources of potentially toxic metals, particularly Sn, Zn and also Cu, which are released both under reducing and oxidising conditions especially in acidic environment. Only very small amounts of Hg are potentially released and should not represent serious threat. Secondary phases that contribute the most to bioaccessibility of these metals are Sn hydroxychlorides, Sn oxides/hydroxides, Sn sulphates/hydroxysulphates, Sn oxides, Zn sulphides and Cu sulphides (Cu₂S).

     

Polychlorinated dibenzo-p-dioxins/furans and dioxin-like polychlorinated biphenyls in food and feed in the Lithuanian market

Foods and feeds were analyzed during the period of 2007–2014 employing validated and accredited methods based on gas chromatography–high-resolution mass spectrometry. Sampling has been carried out in-line with national monitoring programs as well as during import controls into Lithuania. Food samples such as eggs, milk, beef, pork, poultry, fats of plant and animal origin, fish, cod liver, and feed samples such as premixes, feeds of plant origin, compound feed, mineral feed, vegetable oil, and fish meals were analyzed. Most of the samples exhibited concentrations below maximum limits, except cod liver. Health impacts were assessed in respect to human daily intakes. Data between groups are compared.     

Plant species richness of riverbed elevations—the Pripyat river valley case study

Flora of the still unchanged or slightly modified floodplains is particularly valuable. Such are the natural, periodically flooded riparian ecosystems within the Mid-Pripyat river valley in Belarus. Distinctive elements of that area are ‘periodic islands’, which arise from the most elevated parts of the riverbed during flooding and have a specific microtopography. The aim of the research was to recognize floristic composition and ecological conditions of the ‘islands.’ Noted plants were mainly photophilous, by clearly varied in soil moisture, acidity and fertility requirements.     

Impact of industrial pollution on Scots pine (Pinus sylvestris L.) radial growth in the areas of mineral fertilizer factory “Achema”

The aim of research was to assess the changes of annual radial increment of Scots pine forests in the vicinity of intensive and moderate industrial pollution of “Achema” factory producing mineral fertilizers. Our results indicate that the radial growth of the pine tree can be divided into three different periods: growth promotion, growth inhibition and growth recovery. Low levels of nitrogen emissions were beneficial for tree growth: the radial increment in the intensive and moderate pollution zones increased by 15–25% and 10%, respectively compared to control. During the growth inhibition period, the total annual industrial emission was 37–40 kt, and 40–45% radial growth loss was observed for the closest and 15–20% for the most distant stands. The radial growth decrease slowed down and the recovery of damaged stands began in 1990–1992 then air pollution was considerably reduced. The rate of forest recovery was high for the most damaged stands: their radial growth was close to control in 2000–2011.