Tape-stripping as a method for measuring dermal exposure to resin acids during wood pellet production

The purpose of this study was to develop a sensitive and specific method for quantifying dermal exposure to the resin acids 7-oxodehydroabietic acid (7-OXO), dehydroabietic acid (DHAA), abietic acid (AA), and pimaric acid (PA). In addition the method was evaluated in occupational settings during production of wood pellets. Tape-strips were spiked with the substances to evaluate the recovery of the acids from the tape. The removal efficiency of the tape was assessed by tape-stripping a specified area on a glass plate spiked with resin acids. The recovery of the acids from human skin in vivo was evaluated by applying acids in methanol onto the skin of volunteers. Occupational dermal exposure to the resin acids was assessed by tape-stripping the skin of workers involved in the production of wood pellets. The resin acids were analyzed by liquid chromatography mass spectrometry (LC-MS). The limit of detection was 15 pg (7-OXO), 150 pg (DHAA), 285 pg (AA) and 471 pg (PA) per injection. The recovery from spiked tapes was in general 100%. The removal efficiency of the tape was 48-101%. Recovery tests from human skin in vivo showed a mean recovery of 27%. Quantifiable amounts of resin acids were observed on four different skin areas with an increase in exposure during a work shift. This study shows that occupational dermal exposure to resin acids can be assessed by tape-stripping and quantified by LC-MS.     

Intake fraction distributions for benzene from vehicles in the Helsinki metropolitan area

The intake fraction (iF) gives a measure of the portion of a source's emissions that is inhaled by an exposed population over a defined period of time. This study examines spatial and population-based iF distributions of a known human carcinogen, benzene, from a ubiquitous urban source, local vehicular traffic, in the Helsinki Metropolitan Area using three computational methods. The first method uses the EXPAND model (EXPosure to Air pollution, especially to Nitrogen Dioxide and particulate matter), which incorporates spatial and temporal information on population activity patterns as well as urban-scale and street canyon dispersion models to predict spatial population exposure distributions. The second method uses data from the personal monitoring study EXPOLIS (Air Pollution Exposure Distributions of Adult Urban Populations in Europe) to estimate the intake fractions for individuals in the study. The third method, a one-compartment box model provides estimates within an order-of-magnitude or better for non-reactive agents in an urban area. Population intake fractions are higher using the personal monitoring data method (median iF 30 per million, mean iF 39 per million) compared with the spatial model (annual mean iF 10 per million) and the box model (median iF 4 per million, mean iF 7 per million). In particular, this study presents detailed intake fraction distributions on several different levels (spatial, individual, and generic) for the same urban area.     

Evaluation of reproductive safety of beta-sitosterol on the American mink (Neovison vison)

beta-Sitosterol is a weakly estrogenic phytosterol used extensively in functional foods to lower elevated serum cholesterol concentrations due to its inhibitory action on intestinal cholesterol absorption. It caused previously decreased sex steroid concentrations in fish and lowered sperm counts in rats. In the American mink (Neovison vison), litter size increased slightly due to dietary beta-sitosterol supplement. The aim of the present experiment was to conduct a dose-response study on the effects of beta-sitosterol on the reproduction of the American mink. Juvenile male and female mink (n=480) were exposed to 0, 5, 10 or 50 mg of peroral beta-sitosterol kg(-1)d(-1) for 10 months. After 3 months of exposure in November, 15 males per group were sacrificed and general biochemical variables reflecting overall health were determined. The beta-sitosterol-treated male mink had increased absolute and relative masses of intraabdominal fat and higher blood hemoglobin and serum high-density lipoprotein cholesterol concentrations. In spring, the top-rated male mink were mated with multiple females within each study group and reproductive success was assessed. No differences in the reproductive performance of the males (10-11 per group) or females (47-50 per group) could be detected in the exposed groups and the kits of all groups developed in a similar manner. The results suggest that dietary beta-sitosterol presents no significant risk to mammalian fertility.     

Comparison of tanker drivers' occupational exposures before and after the installation of a vapour recovery system

The purpose of this study was to compare tanker drivers' occupational exposure level before and after the installation of vapour recovery facilities at 14 service stations. Road tanker drivers are exposed when handling volatile petrol liquid in bulk in the distribution chain. The drivers' exposure was studied during the unloading operation as the bulk petrol flowed into underground storage tanks, displacing vapours in the tank space and causing emission to the environment and the drivers' work area. The exposures were measured again when the dual point Stage I vapour recovery systems were installed for recycling vapours. Short-term measurements were carried out in the drivers' breathing zones by drawing polluted air through a charcoal tube during unloading. The samples were analysed in the laboratory by gas chromatography for C3-C11 aliphatic hydrocarbons, tert-butyl methyl ether (MTBE), tert-amyl methyl ether (MTAE), benzene, toluene and xylene. The road tanker loads delivered consisted of oxygenated and reformulated petrol (E95 and E98 brands), which contained on average 13% oxygenates. Before the installation of the vapour recovery system, the geometric mean (GM) concentration of aliphatic hydrocarbons was 65 mg m-3 (range 6-645 mg m-3) in the drivers' breathing zones. After the installation at the same service stations, the corresponding exposure level was 8.3 mg m-3 (range < 1-79 mg m-3). The GM of the MTBE concentrations was 8.6 mg m-3 (range 1-67 mg m-3) without vapour recovery and 1.5 mg m-3 (range < 0.1-10 mg m-3) with vapour recovery. The differences between the aliphatic hydrocarbons and the MTBE exposure levels during the unloading of the road tankers without and with vapour recovery were statistically significant (p < 0.05).     

Exposure to insecticides in the use of cold fog generators in greenhouses

The exposure of greenhouse workers to deltamethrin and dichlorvos was studied when low‐volume misters (LVM) were used for the application of these insecticides. Exposure to deltamethrin was mainly by skin contamination and the level of exposure was low. Exposure to dichlorvos was clearly higher than to deltamethrin both through skin and inhalation. These two insecticides are different from chemical structure and character dichlorvos being a highly volatile chemical. The re‐entry period for deltamethrin was calculated to be about ten hours and for dichlorvos two or three days.     

Environmental sustainability comparison of a hypothetical pneumatic waste collection system and a door-to-door system

Waste collection is one of the life cycle phases that influence the environmental sustainability of waste management. Pneumatic waste collection systems represent a new way of arranging waste collection in densely populated urban areas. However, limited information is available on the environmental impacts of this system. In this study, we compare the environmental sustainability of conventional door-to-door waste collection with its hypothetical pneumatic alternative. Furthermore, we analyse whether the size of the hypothetical pneumatic system, or the number of waste fractions included, have an impact on the results. Environmental loads are calculated for a hypothetical pneumatic waste collection system modelled on an existing dense urban area in Helsinki, Finland, and the results are compared to those of the prevailing, container-based, door-to-door waste collection system. The evaluation method used is the life-cycle inventory (LCI). In this study, we report the atmospheric emissions of greenhouse gases (GHG), SO(2) and NO(x). The results indicate that replacing the prevailing system with stationary pneumatic waste collection in an existing urban infrastructure would increase total air emissions. Locally, in the waste collection area, emissions would nonetheless diminish, as collection traffic decreases. While the electricity consumption of the hypothetical pneumatic system and the origin of electricity have a significant bearing on the results, emissions due to manufacturing the system's components prove decisive.     

Model correlation in stochastic forest simulators—A case of multilevel multivariate model for seedling establishment

Forest development can be predicted by the use of forest simulators based on various statistical models describing the forest and its dynamics. One potential approach to study the reliability of the simulators is to utilise Monte Carlo simulation techniques to generate a predictive distribution of a forest characteristic. One problem in examining the effect of model uncertainty in forestry decision making, however, is correlation between the models. If this is not taken into account, predictions of the model systems may become biased, and the effect of errors on decision making may be underestimated. In reality, the models often are interdependent, but the correlations usually are not known because the models have been estimated in separate studies. The aim of this paper is to study the impacts of between-model dependencies on the predictive distribution of forest characteristics by Monte Carlo simulation techniques. We utilise a case of predicting seedling establishment of planted Norway spruce (Picea abies (L.) Karst.) stands as an example with multivariate multilevel model structures. Regardless of low cross-correlations between the models, ignoring them led to significant underestimation of the amount of competing broadleaves to be removed in pre-commercial thinning. Therefore, we recommend that between-model dependencies are clarified and considered in stochastic simulations. In our case, between-model interdependencies can be reliably estimated with a limited dataset. In addition, estimating the models separately and using the model residuals to estimate interdependencies between models were also sufficient to take the between-model dependencies into account when producing stochastic predictions for silvicultural decision making.     

Biological monitoring of wood dust exposure in nasal lavage by high-performance liquid chromatography

A high-performance liquid chromatography (HPLC) method for biomonitoring of occupational wood dust exposure based on nasal lavage as a biomonitoring matrix was developed. Gallic acid (GA) was chosen as the indicator compound for oak dust exposure. From the chromatographic profile of ash dust, four peaks were chosen as indicator compounds. Phenolic indicator compounds were analysed by HPLC. Personal dust samples and corresponding nasal lavage samples were collected from 16 workers exposed to oak dust and six to ash dust. The dust concentrations in the workers' breathing zone varied between 0.7 and 13.8 mg m(-3). The indicators revealed the nature of the wood dust inhaled. For the workers who did not use respirators, the correlation between the dust and corresponding indicator compound in their nasal lavage was significant; r2 = 0.59 (n = 12) for oak dust and r2 = 0.58 (n = 6) for ash dust, respectively. Further, the correlation for oak dust workers who used respirators was r = 0.67 (n = 4). Nasal lavage sampling and HPLC analysis of polyphenol indicator compounds are promising tools for measuring wood dust exposure. Although further validation is necessary, determination of the individual dose may prove invaluable in prospective epidemiological studies.