Differences of two polychaete species reflected in enzyme activities

Polychaetes constitute most of the benthic macroinvertebrates in estuarine and coastal environments. We investigated the utilization of organic matter in two polychaete species, Capitella sp. I and Perinereis nuntia brevicirris, living in different coastal habitats. The protease activity of Capitella sp. I (89.7 μg mg⁻¹) was about 10 times that of P. nuntia brevicirris (8.0 μg mg⁻¹). High cellulase (endo-β-1,4-glucanase) activity was detected in P. nuntia brevicirris (3.2 μg mg⁻¹), whereas scarcely any was detected in Capitella sp. I. We isolated cDNA clones of protease mRNA from Capitella sp. I and of cellulase mRNA from P. nuntia brevicirris. The high protease activity of Capitella sp. I enabled it to survive in the sediment under a fish farm, where it degrades organic matter. In contrast, the high cellulase activity of the estuary-dwelling P. nuntia brevicirris allowed it to degrade organic matter originating from terrestrial areas.     

Dechlorination and destruction of PCDD,PCDF and PCB on selected fly ash from municipal waste incineration

The potential of fly ash to dechlorinate and destroy PCDD, PCDF and PCB was tested under oxygen deficient conditions in the laboratory. Specifically, two types of fly ash were compared, originating either from a fluidized bed incinerator using Ca(OH)₂ spray (FA1), or a stoker incinerator without Ca(OH)₂ impact (FA2).

Results from the present study indicate that on FA2 type fly ash, the degradation processes of OCDD, OCDF and D₁₀CB occurred primarily via dechlorination/hydrogenation up to temperature settings of 340 °C. In contrast, FA1 type fly ash was found to effect both dechlorination and destruction of these compounds already at temperature settings of 260 °C.

The dechlorination velocity of PCDD and PCDF did not differ significantly. However, the first dechlorination step of OCDF in the 1,9-position occurred faster compared to the first dechlorination step of OCDD.

The isomer pattern resulting from the dechlorination processes was quite similar on both FA1 and FA2, indicating that differences in alkalinity or elemental composition of the two types of fly ashes do not have a significant influence on the position of dechlorination. PCDD and PCDF dechlorination of the 2,3,7,8-positions was not favoured over dechlorination of the 1,4,6,9-positions on either type of fly ash. In contrast, dechlorination of PCB occurred predominantly on the toxicological relevant 3- and 4-positions.

The dechlorination/destruction processes were completed on both types of fly ash at 380 °C within one hour, which correlates well with results obtained from actual plant operation practices.     

Measurement of ethylene emission from Japanese red pine (Pinus densiflora) under field conditions in NOx-polluted areas

Emission of ethylene from the needles of Japanese red pine, Pinus densiflora, was measured in air-polluted areas in Hiroshima, Japan. We applied a suitable protocol to determine the rate of ethylene emission from the excised needles. The influence of excision of needles on ethylene emission was not detected during the first 4 h of incubation at 20 degrees C. Ethylene emissions were low in the unpolluted (clean) areas regardless of the altitude or season. The emission of stress ethylene increased with the atmospheric NO2 concentration, suggesting that atmospheric NOx or related substances induced the higher ethylene emission in the polluted areas (near urban and industrial areas). In all cases, 1-year-old needles emitted significantly larger amounts of ethylene than the current needles. Ethylene emission did not increase evenly in the polluted areas, but the frequency of trees emitting high ethylene increased. Therefore, threshold rates for the baseline ethylene emission were proposed.     

Removal of fluoride by effectively using spent cation exchange resin

Journal of Material Cycles and Waste Management - Spent strongly acidic cation exchange resin was effectively used for the removal of trace concentration of fluoride ions. For this purpose, the...     

Sulfur deposition simulations over China, Japan, and Korea: a model intercomparison study for abating sulfur emission

In response to increasing trends in sulfur deposition in Northeast Asia, three countries in the region (China, Japan, and Korea) agreed to devise abatement strategies. The concepts of critical loads and source?Creceptor (S?CR) relationships provide guidance for formulating such strategies. Based on the Long-range Transboundary Air Pollutants in Northeast Asia (LTP) project, this study analyzes sulfur deposition data in order to optimize acidic loads over the three countries. The three groups involved in this study carried out a full year (2002) of sulfur deposition modeling over the geographic region spanning the three countries, using three air quality models: MM5-CMAQ, MM5-RAQM, and RAMS-CADM, employed by Chinese, Japanese, and Korean modeling groups, respectively. Each model employed its own meteorological numerical model and model parameters. Only the emission rates for SO₂ and NO_x obtained from the LTP project were the common parameter used in the three models. Three models revealed some bias from dry to wet deposition, particularly the latter because of the bias in annual precipitation. This finding points to the need for further sensitivity tests of the wet removal rates in association with underlying cloud?Cprecipitation physics and parameterizations. Despite this bias, the annual total (dry plus wet) sulfur deposition predicted by the models were surprisingly very similar. The ensemble average annual total deposition was 7,203.6?±?370 kt S with a minimal mean fractional error (MFE) of 8.95?±?5.24?% and a pattern correlation (PC) of 0.89?C0.93 between the models. This exercise revealed that despite rather poor error scores in comparison with observations, these consistent total deposition values across the three models, based on LTP group's input data assumptions, suggest a plausible S?CR relationship that can be applied to the next task of designing cost-effective emission abatement strategies.     

Arsenic contamination in groundwater and its possible sources in Hanam, Vietnam

This study investigated the arsenic (As) level in groundwater, and the characteristics of aquifer sediment as related to the occurrence of As in groundwater in Hanam, Vietnam. The deposition and transport of As-containing substances through rivers were also examined. Arsenic concentrations in 88% of the groundwater samples exceeded the As limit for drinking water based on the WHO standards. The dominating form of arsenic was As(III). The maximum total As content in bore core sediment was found in a peat horizon of the profiles and generally, elevated levels of As were also found in other organic matter-rich horizons. Total As contents of the bore core sediments were significantly correlated with crystalline iron oxide, silt and clay contents, suggesting that As in aquifer sediment was mainly associated with iron (hydr)oxides and clay mineral. In the groundwater, As concentration showed significant correlations with the total concentrations of Fe and HCO (3)(-). Significant correlations between HCl-extractable As and non-crystalline Fe oxide, total C, N, and S were also observed in the profiles. The results support the hypothesis that under favorable reductive conditions established by the degradation of organic matter, the dissolution of iron (hydr)oxides releases adsorbed As into the groundwater. The deposition of As in the sediments from the Red River were significantly higher than that in the Chau Giang River, suggesting that the Red River is the main source of As-containing substances deposited in the study area.     

Mating pheromones of heterobasidiomycetous yeasts

Two mating pheromones, which induce mating tube formation, were isolated fromRhodosporidium toruloides (rhodotorucineA) andTremella mesenterica (tremerogenA-10). These mating pheromones are lipophilic oligopeptides having S-alkylated cysteine at the C-terminus but different amino acid sequences. Synthetic analogues of these pheromones revealed the structure-activity relationships. Metabolism of rhodotorucineA was also studied by using labeled pheromones.     

Simulation of long-term environmental dynamics of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans using the dynamic multimedia environmental fate model and its implication to the time trend analysis of dioxins

Long term environmental fate of polychlorinated dibenzo-p-dioxins (PCDD) and polychlorinated dibenzofurans (PCDF) were studied using the fugacity-based dynamic multimedia environmental fate model. New formulation about soil wind erosion into air was included into the model. Effect of process assumption, sensitivity analysis for parameters, and tentative validation against the measured sediment core analysis was performed. Mass fluxes between compartments were estimated by the dynamic modeling. From the model estimates, major mass fluxes coming from emission source were shown to go to the soil and water through wet/dry deposition, then go to degradation mainly in the soil and sediment. Major mass fluxes of TCDD and OCDD come from the impurities in CNP (Chlornitrofen) and PCP (Pentachlorophenol) directly into the soil. Consideration about multimedia environmental dynamics using the modeled mass fluxes was shown in the discussion.     

Ignitability of aluminous coating powders due to electrostatic spark

Electrostatic Powder coating which is a surface finishing technique has widely been used in paint industry since its invention in the 1960s. However, so far, insufficient attention has been paid to the powder fires and/or explosion hazards caused by electrostatic spark during coating process. This paper is a report of the electrostatic spark ignitability of aluminous coating powders (dry blend-type) used in practical electrostatic powder coating. The Hartman vertical-tube apparatus was used for the minimum ignition energy (MIE) test. Various aluminous coating powders, different with respect to the amount of aluminum pigment, were used in this study. Experimental results obtained in this study are as follows: (1) The aluminous coating powder was so sensitive that even an electrostatic spark with an energy as low as 10 mJ could ignite it. (2) The particle size of aluminous coating powder has a considerable effect on the ignitability when the aluminum pigment concentration is within 6 wt% of the practical coating powder manufacturing standards. Thus, the conventional expression for estimating the MIE can be useful when assessing the electrostatic hazards associated with aluminum coating powders.