A people‐centred perspective on climate change,environmental stress,and livelihood resilience in Bangladesh

The Ganges–Brahmaputra delta enables Bangladesh to sustain a dense population, but it also exposes people to natural hazards. This article presents findings from the Gibika project, which researches livelihood resilience in seven study sites across Bangladesh. This study aims to understand how people in the study sites build resilience against environmental stresses, such as cyclones, floods, riverbank erosion, and drought, and in what ways their strategies sometimes fail. The article applies a new methodology for studying people’s decision making in risk-prone environments: the personal Livelihood History interviews (N = 28). The findings show how environmental stress, shocks, and disturbances affect people’s livelihood resilience and why adaptation measures can be unsuccessful. Floods, riverbank erosion, and droughts cause damage to agricultural lands, crops, houses, and properties. People manage to adapt by modifying their agricultural practices, switching to alternative livelihoods, or using migration as an adaptive strategy. In the coastal study sites, cyclones are a severe hazard. The study reveals that when a cyclone approaches, people sometimes choose not to evacuate: they put their lives at risk to protect their livelihoods and properties. Future policy and adaptation planning must use lessons learned from people currently facing environmental stress and shocks.     

Does your facility have a dust problem: Methods for evaluating dust explosion hazards

The hazards of dust explosions prevailing in plants are dependent on a large variety of factors that include process parameters, such as pressure, temperature and flow characteristics, as well as equipment properties, such as geometry layout, the presence of moving elements, dust explosion characteristics and mitigating measures. A good dust explosion risk assessment is a thorough method involving the identification of all hazards, their probability of occurrence and the severity of potential consequences. The consequences of dust explosions are described as consequences for personnel and equipment, taking into account consequences of both primary and secondary events.While certain standards cover all the basic elements of explosion prevention and protection, systematic risk assessments and area classifications are obligatory in Europe, as required by EU ATEX and Seveso II directives. In the United States, NFPA 654 requires that the design of the fire and explosion safety provisions shall be based on a process hazard analysis of the facility, process, and the associated fire or explosion hazards. In this paper, we will demonstrate how applying such techniques as SCRAM (short-cut risk analysis method) can help identify potentially hazardous conditions and provide valuable assistance in reducing high-risk areas. The likelihood of a dust explosion is based on the ignition probability and the probability of flammable dust clouds arising. While all possible ignition sources are reviewed, the most important ones include open flames, mechanical sparks, hot surfaces, electric equipment, smoldering combustion (self-ignition) and electrostatic sparks and discharges. The probability of dust clouds arising is closely related to both process and dust dispersion properties.Factors determining the consequences of dust explosions include how frequently personnel are present, the equipment strength, implemented consequence-reducing measures and housekeeping, as risk assessment techniques demonstrate the importance of good housekeeping especially due to the enormous consequences of secondary dust explosions (despite their relatively low probability). The ignitibility and explosibility of the potential dust clouds also play a crucial role in determining the overall risk.Classes describe both the likelihood of dust explosions and their consequences, ranging from low probabilities and limited local damage, to high probability of occurrence and catastrophic damage. Acceptance criteria are determined based on the likelihood and consequence of the events. The risk assessment techniques also allow for choosing adequate risk reducing measures: both preventive and protective. Techniques for mitigating identified explosions risks include the following: bursting disks and quenching tubes, explosion suppression systems, explosion isolating systems, inerting techniques and temperature control. Advanced CFD tools (DESC) can be used to not only assess dust explosion hazards, but also provide valuable insight into protective measures, including suppression and venting.     

Sustainability of Nations

SUMMARY

A method is presented to interrelate the development of economy, environment and social quality in communities. Economy and environment, in initial development stages, oppose each other. Social welfare and economy generally develop simultaneously. To assess overall progress in sustainable development, an integrated and quantifiable framework is presented which defines five levels of sustainability. Increasing sustainability is characterized by growing responsibility for the impacts of man's actions in space and time. Through increased eco-efficiency and changed awareness, nations and companies arrive at a synergistic relationship between environment and economy. It is indicated that social security benefits expenditure increases by a factor 3.5 and carbon dioxide emissions per capita decreases by a factor 3 at each higher level of sustainability. Quantified differences in sustainability levels of 24 nations are shown. Priorities for improving and safeguarding sustainability are indicated.     

Influence of chlorination pH and chlorine dose on the formation of mutagenic activity and the strong bacterial mutagen 3-chloro-4-(dichloromethyl)-5-hydroxy-5(2H)-furanone (MX) in water

Samples from two Dutch raw water sources were chlorinated in the laboratory at different pH:s and chlorine doses, and were analysed for mutagenic activity and the mutagenic compound 3-chloro-4-(dichloromethyl)-5-hydroxy-2(5H)-furanone (MX). Chlorination produced mutagenic activity as well as MX in both waters. The formation of MX was favoured by acidic reaction conditions and high chlorine doses, but in waters treated with excess chlorine at pH 9, no MX was detected. The mutagenicity was approximately on the same level after chlorination of both water types but the MX concentration was significantly higher in the water containing mainly humic material.

MX was found to be quantitatively extracted from acidified waters by the XAD resin adsorption technique.     

Comparison of semipermeable membrane device (SPMD) and large-volume solid-phase extraction techniques to measure water concentrations of 4,4'-DDT, 4,4'-DDE, and 4,4'-DDD in Lake Chelan, Washington

Semipermeable membrane devices (SPMDs) spiked with the performance reference compound PCB29 were deployed 6.1 m above the sediments of Lake Chelan, Washington, for a period of 27 d, to estimate the dissolved concentrations of 4,4'-DDT, 4,4'-DDE, and 4,4'-DDD. Water concentrations were estimated using methods proposed in 2002 and newer equations published in 2006 to determine how the application of the newer equations affects historical SPMD data that used the older method. The estimated concentrations of DDD, DDE, and DDD calculated using the older method were 1.5-2.9 times higher than the newer method. SPMD estimates from both methods were also compared to dissolved and particulate DDT concentrations measured directly by processing large volumes of water through a large-volume solid-phase extraction device (Infiltrex 300). SPMD estimates of DDD+DDE+DDT (SigmaDDT) using the older and newer methods were lower than Infiltrex concentrations by factors of 1.1 and 2.3, respectively. All measurements of DDT were below the Washington State water quality standards for the protection of human health (0.59 ng l(-1)) and aquatic life (1.0 ng l(-1)).     

I will not go,I cannot go: cultural and social limitations of disaster preparedness in Asia,Africa, and Oceania

While much work has been invested in addressing the economic and technical basis of disaster preparedness, less effort has been directed towards understanding the cultural and social obstacles to and opportunities for disaster risk reduction. This paper presents local insights from five different national settings into the cultural and social contexts of disaster preparedness. In most cases, an early warning system was in place, but it failed to alert people to diverse environmental shocks. The research findings show that despite geographical and typological differences in these locations, the limitations of the systems were fairly similar. In Kenya, people received warnings, but from contradictory systems, whereas in the Philippines and on the island of Saipan, people did not understand the messages or take them seriously. In Bangladesh and Nepal, however, a deeper cultural and religious reasoning serves to explain disasters, and how to prevent them or find safety when they strike.     

Evaluation of Human Exposure to Ambient PM10 in the Metropolitan Area of Mexico City Using a GIS-Based Methodology

ABSTRACT

The main goal of this study was to evaluate the magnitude of outdoor exposure to fine particulate matter (PM₁₀) potentially experienced by the population of metropolitan Mexico City. With the use of a geographic information system (GIS), spatially resolved PM₁₀ distributions were generated and linked to the local population. The PM₁₀ concentration exceeded the 24-hr air quality standard of 150 μg/m³ on 16% of the days, and the annual air quality standard of 50 μg/m³ was exceeded by almost twice its value in some places. The basic methodology described in this paper integrates spatial demographic and air quality databases, allowing the evaluation of various air pollution reduction scenarios. Achieving the annual air quality standard would represent a reduction in the annual arithmetic average concentration of 14 μg/m³ for the typical inhabitant. Human exposure to particulate matter (PM) has been associated with mortality and morbidity in Mexico City; reducing the concentration levels of this pollutant would represent a reduction in mortality and morbidity and the associated cost of such impacts. This methodology is critical to assessing the potential benefits of the current initiative to improve air quality implemented by the Environmental Metropolitan Commission of Mexico City.     

Estrogenic and dioxin-like compounds in sediment from Zierikzee harbour identified with CALUX assay-directed fractionation combined with one and two dimensional gas chromatography analyses

The identity of compounds responsible for estrogenic and dioxin-like activities in sediment from the harbour of the small town Zierikzee in Zeeland, The Netherlands, was investigated using a bioassay directed fractionation approach with the in vitro estrogen and dioxin responsive reporter gene assays ER- and DR-CALUX. For identification of compounds exhibiting activity in the bioassays, either one or two-dimensional GC in combination with quadrupole (MSD), ion trap (ITD) or time-of-flight mass spectrometric detection (ToF-MS) was used, depending on the biological and chemical characteristics and the complexity of the fractions. The natural estrogenic hormone 17-β-estradiol and its metabolite estrone were identified with GC–ITD as the main contributors to the estrogenic activity. After successive rounds of fractionation, the dioxin-like activity could be explained by the presence of various polycyclic aromatic hydrocarbons identified with GC–MSD and two-dimensional comprehensive GC × GC–ToF-MS. Some estrogenic activity of a relatively non-polar nature remained unidentified.     

Modelling and field application of the Chemcatcher passive sampler calibration data for the monitoring of hydrophobic organic pollutants in water

Passive sampling of dissolved pollutants in water has been gaining acceptance for environmental monitoring. Previously, an integrative passive sampler consisting of a C18 Empore disk receiving phase saturated with n-octanol and fitted with low density polyethylene membrane, was developed and calibrated for the measurement of time weighted average (TWA) concentrations of hydrophobic pollutants in water. In this study, the exchange kinetics were modelled to obtain a better understanding of the mechanism of the accumulation process and to enable the measurement of TWA concentrations of hydrophobic pollutants in the field. An empirical relationship that enables the calculation of in situ sampling rates of chemicals using performance reference compounds was derived and its application was demonstrated in a field study in which TWA aqueous concentrations estimated from sampler data for target analytes were compared with TWA concentrations obtained from spot samples of water collected regularly during the sampler deployment period.