Risk-Based Prioritization of Air Pollution Monitoring Using Fuzzy Synthetic Evaluation Technique

Air pollution monitoring programs aim to monitor pollutants and their probable adverse effects at various locations over concerned area. Either sensitivity of receptors/location or concentration of pollutants is used for prioritizing the monitoring locations. The exposure-based approach prioritizes the monitoring locations based on population density and/or location sensitivity. The hazard-based approach prioritizes the monitoring locations using intensity (concentrations) of air pollutants at various locations. Exposure and hazard-based approaches focus on frequency (probability of occurrence) and potential hazard (consequence of damage), respectively. Adverse effects should be measured only if receptors are exposed to these air pollutants. The existing methods of monitoring location prioritization do not consider both factors (hazard and exposure) at a time. Towards this, a risk-based approach has been proposed which combines both factors: exposure frequency (probability of occurrence/exposure) and potential hazard (consequence).This paper discusses the use of fuzzy synthetic evaluation technique in risk computation and prioritization of air pollution monitoring locations. To demonstrate the application, common air pollutants like CO, NO_x, PM₁₀ and SO_x are used as hazard parameters. Fuzzy evaluation matrices for hazard parameters are established for different locations in the area. Similarly, fuzzy evaluation matrices for exposure parameters: population density, location and population sensitivity are also developed. Subsequently, fuzzy risk is determined at these locations using fuzzy compositional rules. Finally, these locations are prioritized based on defuzzified risk (crisp value of risk, defined as risk score) and the five most important monitoring locations are identified (out of 35 potential locations). These locations differ from the existing monitoring locations.     

Aerosol Scavenging: Model Application and Sensitivity Analysis in the Indian Context

Sulfate aerosols have been found to bethe major contributors to precipitation acidity. Thus,in view of the long-term ecological repercussions theyhave on aquatic ecosystems and their acidity-potential,the present analysis focuses on a case study applicationof the layer-averaged aerosol-scavenging model (Okita et al., 1996) for predicting values of the wet scavengingcoefficient and sulfate concentrations in precipitationsamples on the basis of the information available forsome selected Indian cities. Through sensitivityanalysis (Pandey et al., 1997) the scavengingcoefficient has been found to be very strongly dependenton precipitation intensity. Comparison of modelpredictions has been done with the measured values forDelhi, Mumbai, Calcutta and Chennai in India.     

Distribution of heavy metals in water and sediments of selected sites of Yamuna river (India)

The concentration of Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, and Zn metals in water and sediments of Yamuna river were determined by atomic absorption spectrophotometry in the year 1981. The data showed that there was considerable variation in the concentration of elements from one sampling station to the other which may be due to the variation in the quality of industrial and sewage wasters being added to the river at different sampling stations. The sediment samples collected from different sampling stations were also analysed for calcium carbonate, organic matter, potassium, and phosphorus.     

Soil properties and crop productivity as influenced by flyash incorporation in soil

Field experiments were carried out during 1996–97at Gulawathi, Muthiani and Salarpur Villages, IARI Farm, NewDelhi and NCPP Campus, Dadri to evaluate changes in soilcharacteristics and growth of wheat (Triticum aestivum L.),mustard (Brassica juncea L.), lentil (Lence esculentaMoench.), rice (Oryza sativa L.) and maize (Zea mays L.) byvarying amounts of flyash addition (up to 50t ha^-1) in soils atsowing/transplanting time of crops. Flyash addition in areasadjoining NCPP Thermal Power Plant, Dadri, Ghaziabad, U.P.ranged from 5–12 t ha^-1 yr^-1 in 1995–96. Shoot and root growthand yield of test crops at different locations after flyashincorporation resulted in beneficial effects of flyashaddition in most cases. The silt dominant texture of flyashimproved loamy sand to sandy loam textures of the surfacesoils at the farmers' fields. The increased growth in yield ofcrops with flyash incorporation was possibly due tomodifications in soil moisture retention and transmissioncharacteristics, bulk density, physico-chemical characterssuch as pH and EC and organic carbon content. The response offlyash addition in the soil on soil health and cropproductivity needs to be evaluated on long-term sustainableaspects.     

Adsorptive removal of phosphate by the bimetallic hydroxide nanocomposites embedded in pomegranate peel

This study aimed to fabricate new and effective material for the efficiency of phosphate adsorption. Two types of adsorbent materials, the zirconium hydroxides embedded in pomegranate peel (Zr/Peel) and zirconium-lanthanum hydroxides embedded in pomegranate peel (Zr–La/Peel) were developed. Scanning electronic microscopy (SEM), x-ray photoelectron spectroscopy (XPS) and x-ray diffraction (XRD) were evaluated to give insight into the physicochemical properties of these adsorbents. Zr–La/Peel exceeded the adsorption efficiency of Zr/Peel adsorbents in batch adsorption experiments at the same pH level. The peel as a host can strive to have a strong “shielding effect” to increase the steadiness of the entrenched Zr and La elements. La and Zr are hydroxide metals that emit many hydrogen ions during the hydrolysis reaction, which contribute to protonation and electrostatic attraction. The highest adsorption capacity of La–Zr/Peel for phosphate was calculated to be 40.21 mg/g, and pseudo second-order equation is very well fitted for kinetic adsorption. Phosphate adsorption efficiency was reduced by an increase of pH. With the background of coexisting Cl^?, little effect on adsorption efficiency was observed, while adsorption capacities were reduced by almost 20–30% with the coexistence of ${{\text{SO}}_4}^{2?}$, ${{\text{NO}}_3}^{?}$ and humic acid (HA).     

The influence of source and timing of nitrogen fertilizers on yield and nitrogen use efficiency of four sweet potato cultivars

Nitrogen (N) availability is a very important determinant of crop yield. It is also one of the most expensive inputs in crop production. Thus, the efficient management of N by farmers with limited resource is a very important part of successful soil and crop management system. A field study was conducted on a Norfolk sandy loam soil at the George Washington Carver Agricultural Experiment Station, Tuskegee, AL, to evaluate the influence of fertilizer source and timing on the yield of four sweet potato [Ipomoea batatas (L.)] cultivars. Two N sources (urea, CO(NH₂)₂ and ammonium nitrate, NH₄NO₃), four sweet potato cultivars (‘Georgia Jet’, GA-Jet; ‘TU-82-155’, TU-155; ‘TU-1892’; and ‘Rojo Blanco’, Rojo-Bl) and three times (zero, single, and split applications) were used in a factorial designed experiment. Plants were harvested after 80 and 120 days and total and marketable yields determined. Nitrogen recovery efficiency, yield efficiency and physiological efficiency were also determined. Total and marketable yields of early maturing cultivars were significantly higher than of late maturing cultivars (P<0.05). The single application of N resulted in significantly higher yield in storage roots than split application (P<0.05). Physiological efficiency values were highly correlated with total marketable yields. Recovery rates increased with time. Late maturing cultivars tended to have higher N recovery and physiological efficiency than early maturing cultivars. These results suggest that cultivar maturity group should play an important part in N fertilization recommendations for sweet potato.     

Protozoan colonization on artificial substrates in relation to water quality in a tropical Indian harbour.

A field study was conducted to evaluate the protozoan colonization patterns on artificial substrates in relation to organic pollution within a tropical harbour. The composition of protozoans and their succession rates on artificial substrates(polyurethane foam units) were compared between two field stations(A and B), and their presence were considered with regards to the prevailing water quality conditions at the study sites. Altogether 44 genera of flagellates and ciliates were documented. The common genera of flagellates encountered included Monas, Polytoma, and Chromalina. Among the ciliates, the predominant genera were Tetrahymena, Vorticella, Lagymophyra, and Heloiphyra. These groups exhibited characteristic successional patterns in relation to ambient water quality. At Station A, located close to the sewage outfall, the water quality parameters included poor Secchi-disc transparency(0.48 m), dissolved oxygen of 1.93 mg/ml, salinity of 18 psu, and temperature 31.3 degrees C. Here, the nanoflagellates (spumella) colonized first, followed by microcilliate(Tetrahymena) and sessile form(Vorticella). Station B, located on the seaward side, was characterized by relatively less-stressed environmental conditions with transparency 1.85 m and dissolved oxygen value of 6.04 mg/ml. Salinity of 27.27 psu, and mean temperature of 30 degrees C were recorded at "B". At this station, the nanoflagellate Polytoma was first documented to colonize on the substrates, followed by microcilliate(Lagynophrya) and suctorid(Heliophyra). These findings support the use of protozoans as indicator species for evaluating the hazards posed by organic pollution to natural estuarine communities.     

Development of a procedure for sustainable in situ aquifer denitrification

Denitrification experiments have provided data showing the pitfalls and successes in developing a sustainable injection/extraction system in a sand and gravel aquifer. Experiments increase in complexity from continuous injection at one well to automated‐pulsed eight well injections. In both continuous and pulsed injection of organic carbon, 40 mg NO_3‐N l^?1 was reduced below the detection limit of < 0.1 mg NO_3‐N l^?1 in the denitrification zones. Under continuous injection, accumulation of bacterial exudates in the vicinity of the injection well resulted in injection well clogging within ten days. Periodic cleaning of the injection well and the adjacent gravel matrix was accomplished by using a tool developed to circulate a cleaning solution composed of 5 percent H₂O₂ and 0.02 percent NaOCl; but, biofouling could not be eliminated. In the later experiments, acetate became the carbon amendment because ethanol promoted more biomass development. A specialized pulse injection procedure was developed to separate nitrate from acetate‐C and was successful in alleviating the proliferation of bacterial exudates without affecting the performance of the denitrification system. Using pulsed injection, a maximum of 72 percent nitrate reduction was accomplished in the extraction well water, and denitrification was sustained for three months without clogging. © 2003 Wiley Periodicals, Inc.     

TOPHAZOP: a knowledge-based software tool for conducting HAZOP in a rapid, efficient yet inexpensive manner

Hazard and operability (HAZOP) studies constitute an essential step in the risk analysis of any chemical process industry and involve systematic identification of every conceivable abnormal process deviation, its causes and abnormal consequences. These authors have recently proposed optHAZOP as an alternative procedure for conducting HAZOP studies in a shorter span of time than taken by conventional HAZOP procedure, with greater accuracy and effectiveness [Khan, F. I. and Abassi, S. A., optHAZOP. An effective and efficient technique for hazard identification and assessment Journal of Loss Prevention in the Process Industries, 1997, 10, 191–204]. optHAZOP consists of several steps, the most crucial one requires use of a knowledge-based software tool which would significantly reduce the requirement of expert man-hours and speed up the work of the study team. TOPHAZOP (Tool for OPTmizing HAZOP) has been developed to fulfil this need.

The TOPHAZOP knowledge-base consists of two main branches: process-specific and general. The TOPHAZOP framework allows these two branches to interact during the analysis to address the process-specific aspects of HAZOP analysis while maintaining the generality of the system. The system is open-ended and modular in structure to make easy implementation and/or expansion of knowledge. The important features of TOPHAZOP and its performance on an industrial case study are described.