Processing and Morphology Impacts on Mechanical Properties of Fungal Based Biopolymer Composites

Fungal based biopolymer matrix composites with lignocellulosic agricultural waste as the filler are a viable alternative for some applications of synthetic polymers. This research provides insight into the impact of the processing method and composition of agriwaste/fungal biopolymer composites on structure and mechanical properties. The impact of nutrition during inoculation and after a homogenization step on the three-point bend flexural modulus and strength was determined. Increasing supplemental nutrition at inoculation had little effect on the overall composite strength or modulus; however, increasing carbohydrate loading after a homogenization step increased flexural stress at yield and bulk flexural modulus. The contiguity of the network formed was notably higher in the latter scenario, suggesting that the increase in modulus and strength of the final composite after homogenization was the result of contiguous hyphal network formation, which improves the integrity of the matrix and the ability to transfer load to the filler particles.     

Domoic acid in benthic flatfish on the continental shelf of Monterey Bay,California, USA

Within Monterey Bay, California, USA, the food web transfer of domoic acid (DA), a neurotoxin produced by diatoms of the genus Pseudo-nitzschia, has led to major mortality events of marine mammals and birds. Less visible, and less well known, is whether invertebrates and fish associated with the benthos are also affected by blooms of DA-producing Pseudo-nitzschia spp. This study examines the presence of DA in benthic flatfish offshore of Davenport, California, (37°0′36″N, 122°13′12″W) and within Monterey Bay, California (36°45′0″N, 122°1′48″W), including species that feed primarily in the sediment (benthic-feeding) and species that feed primarily in the water column (benthopelagic-feeding). Flatfish caught between 10 December 2002 and 17 November 2003 at depths of 30–180 m had concentrations of DA in the viscera ranging from 3 to 26 μg DA g⁻¹ of viscera. Although the DA values reported are relatively low, benthic-feeding flatfish were frequently contaminated with DA, especially as compared with the frequency of contamination of flatfish species that feed in the water column. Furthermore, on days in which both benthic-feeding and benthopelagic-feeding flatfish were collected, the former had significantly higher concentrations of DA in the viscera. Curlfin turbot, Pleuronicthys decurrens, the flatfish with both the highest level and frequency of DA contamination, are reported to feed exclusively on polychaetes, suggesting that these invertebrates may be an important vector of the toxin in benthic communities and may pose a risk to other benthic-feeding organisms. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Injuries as a Result of California Earthquakes in the Past Decade

The devastating effects of earthquakes have been demonstrated repeatedly in the past decade, through moderate and major earthquakes such as the October 1987 Whittier Narrows earthquake (5.9 on the Richter scale), the October 1989 Loma Prieta earthquake (7.1) and the January 1994 Northridge earthquake (6.7). While 'official' tallies of injuries and deaths are reported for each event, the numbers vary from report to report. For Northridge, the number of injuries vary between 8,000 and 12,000; the number of deaths from 33 to 73 (Peek-Asa et al., 1997; Durkin, 1996).While official estimates are commonly reported following disasters, the study of actual numbers, types and causes of casualties has not developed. In this paper, we identify the numbers and risk factors for injuries within community-based samples across three earthquakes in urban California. We first report the numbers and types of injuries in each earthquake and then identify risk factors specifically associated with the Northridge earthquake     

Simulation of organic liquid flow in porous media using estimated and measured transport properties

Many numerical models which describe the movement of a separate organic liquid phase in the subsurface require information about the relationships between capillary pressure and saturation, and between relative permeability and saturation. An evaluation of the information available for these relationships suggests that substantial discrepancies may be introduced into simulations if estimated, rather than measured, data are employed. The purpose of this study was to quantify these deviations. Two-phase displacement simulations were performed in one and two dimensions for several organic liquid-water systems. Both constant-head and constant-flux boundary conditions were employed at a variety of flow rates and time scales, using both measurements and estimates of capillary pressure and relative permeability for a sandy aquifer material. The results demonstrate that the use of estimated transport relationships produces significantly different predictions of organic liquid migration. The magnitude of the deviations between predictions may be as high as 25% or more after relatively short displacement periods, depending on the boundary conditions of the simulated scenario, as well as on the physical characteristics of the two-phase system. For the systems examined, most of the deviations resulted from the estimates for relative permeability to the organic liquid. Thus, improved methods for the estimation of the relative permeability to the organic liquid are needed to reduce the uncertainty in displacement simulations.     

The characterisation of polycyclic aromatic hydrocarbons emissions from burning of different firewood species in Australia

Four kinds of woods used for residential heating in Australia were selected and burned under two burning conditions in a domestic wood heater installed in a laboratory. The selected wood species included pine (Pinus radiata), red gum (Eucalvptus camaldulensis), sugar gum (Eucalyptus cladocalyx) and yellow box (Eucalyptus melliodora). The two different burning conditions represented fast burning and slow burning, with the air inlet of the combustion chamber respectively 'full open' and 'half open'. By sampling and analysing particulate and gaseous emissions from the burning of each load of wood under defined experimental conditions, PAHs emissions and their profiles in the particulate and gaseous phases were obtained. 16 species out of the 18 selected PAHs were detected. Of these, seven species were detected in the gaseous phase and most were lower molecular weight compounds.Similarly, more than 10 species of PAHs were detected in the particulate phase and these were mostly heavier molecular weight compounds. Under both burning conditions, emission levels for total PAHs and total genotoxic PAHs were the highest for pine and lowest for sugar gum, with red gum being the second highest, followed by yellow box. Using the specific sampling method, gaseous PAHs accounted for above 90% mass fraction of total PAHs in comparison to particulate PAHs (10%). The majority of the genotoxic PAHs were present in the particulate phase. PAHs emission levels in slow burning conditions were generally higher than those in fast burning conditions.     

Performance of the Button Personal Inhalable Sampler for the measurement of outdoor aeroallergens

No personal aerosol sampler has been evaluated for monitoring aeroallergens in outdoor field conditions and compared to conventional stationary aerobiological samplers. Recently developed Button Personal Inhalable Aerosol Sampler has demonstrated high sampling efficiency for non-biological particles and low sensitivity to the wind direction and velocity. The aim of the present study was to evaluate the Button Sampler for the measurement of outdoor pollen grains and fungal spores side-by-side with the widely used Rotorod Sampler. The sampling was performed for 8 months (spring, summer and fall) at a monitoring station on the roof of a two-storied office building located in the center of the city of Cincinnati. Two identical Button Samplers, one oriented towards the most prevalent wind and the other towards the opposite wind and a Rotorod Sampler were placed side-by-side. The total fungal spore concentration ranged from 129 to 12,980 spores m(-3) (number per cubic meter of air) and the total pollen concentration from 4 to 4536 pollen m(-3). The fungal spore concentrations obtained with the two Button Samplers correlated well (r = 0.95; p<0.0001). The pollen data also showed positive correlation. These findings strongly support the results of earlier studies conducted with non-biological aerosol particles, which demonstrated a low wind dependence of the performance of the Button Sampler compared to other samplers. The Button Sampler's inlet efficiency was found to be more dependent on wind direction when sampling larger sized Pinaceae pollen grains (aerodynamic diameter approximately 65 mum). Compared to Rotorod, both Button Samplers measured significantly higher total fungal spore concentrations. For total pollen count, the Button Sampler facing the prevalent wind showed concentrations levels comparable to that of the Rotorod, but the Button Sampler oriented opposite to the prevalent wind demonstrated lower concentration levels. Overall, it was concluded that the Button Sampler is efficient for the personal sampling of outdoor aeroallergens, and is especially beneficial for aeroallergens of small particle size.     

The interaction effects of binary mixtures of benzene and toluene on the developing heart of medaka (Oryzias latipes)

The United States Environmental Protection Agency (USEPA) has pursued the estimation of risk of adverse health effects from exposure to chemical mixtures since the early 1980s. Methods used to calculate risk estimates of mixtures were often based on single chemical information that required assumptions of dose-addition or response-addition and did not consider possible changes in response due to interaction effects among chemicals. Full factorial designs for laboratory studies can produce interactions information, but these are expensive to perform and may not provide the information needed to evaluate specific environmentally relevant mixtures. In this research, groups of Japanese medaka (Oryzias latipes) embryos were exposed to binary mixtures of benzene and toluene as well as to each of these chemicals alone. Endpoint specific dose-response models were built for the hydrocarbon mixture under an assumption of dose-additivity, using the single chemical dose-response information on benzene and toluene. The endpoints included heart rate, heart rate progression, and lethality. Results included a synergistic response for heart rate at 72 h of development, and either additivity or antagonism for all other endpoints at 96 h of development. This work uses an established statistical method to evaluate the toxicity of an environmentally relevant mixture to ascertain whether interaction effects are occurring, thus providing additional information on toxicity.     

Ultrasonic destruction of surfactants: application to industrial wastewaters.

This research focused on the use of sonication to destroy surfactants and surface tension properties in industrial wastewaters that affect traditional water treatment processes. We have investigated the sonochemical destruction of surfactants and a chelating agent to understand the release of metals from surfactants during sonication. In addition, the effects of physical properties of surfactants and the effect of ultrasonic frequency were investigated to gain an understanding of the factors affecting degradation. Sonochemical degradation of surfactants was observed to be more effective than nonsurfactant compounds. In addition, as the concentration is increased, the degradation rate constant does not decrease as significantly as with nonsurfactant compounds in the near-field acoustical processor reactor. The degradation of metal complexes is not as effective as in the absence of the metal. However, this is likely an artifact of the model complexing agent used. Surfactant metal complexes are expected to be faster, as they will accumulate at the hot bubble interface, significantly increasing ligand exchange kinetics and thus degradation of the complex.     

Genetic population structure of fishes: implications for coastal zone management

The pattern for distribution of genetic variation within and between populations is referred to as the genetic population structure of the species. To avoid depletion of genetic resources sustainable management should be based on knowledge of this structure. We discuss key aspects of genetic population structure in the context of identifying biological units for fisheries management, suggesting three basic types of structuring: distinct populations; continuous change; and no differentiation. The type of structure determines how units for genetically sustainable management are to be identified. We also review what is currently known regarding the genetic population structure of fishes exploited in the Swedish part of the Baltic Sea, and conclude that sufficient genetic information is lacking for most of the species. This is a serious problem, particularly considering that populations of several commercially exploited fishes are declining and some exhibit recruitment problems. For six species, Atlantic herring, Atlantic salmon, brown trout, European eel, turbot, and pike, sufficient genetic data are available to provide at least basic information on genetic structure and genetic units for biologically sustainable use. Current management practices do not sufficiently consider these data.