Development of a test method against hot alkaline chemical splashes.

High temperature alkaline chemical liquids have caused injuries and hazardous situations in Finnish pulp manufacturing mills. There are no requirements and/or test method standards concerning protection against high temperature alkaline chemical splashes. This paper describes the test method development process to test and identify materials appropriate for hot liquid chemical hazard protection. In the first phase, the liquid was spilled through a stainless steel funnel and the protection performance was evaluated using a polyvinyl chloride (PVC) film under the test material. After several tentative improvements, a graphite crucible was used for heating and spilling the chemical, and a copper-coated K-type thermometer with 4 independent measuring areas was designed to measure the temperature under the material samples. The thermometer was designed to respond quickly so that peak temperatures could be measured. The main problem was to keep the spilled amount of chemical constant, which unfortunately resulted in significant variability in data.     

Effects of bed materials on the performance of an anaerobic sequencing batch biofilm reactor treating domestic sewage

The objective of this study was to determine the best performance of an anaerobic sequencing batch biofilm reactor (AnSBBR) based on the use of four different bed materials as support for biomass immobilization. The bed materials utilized were polyurethane foam (PU), vegetal carbon (VC), synthetic pumice (SP), and recycled low-density polyethylene (PE). The AnSBBR, with a total volume of 7.2L, was operated in 8-h batch cycles over 10 months, and fed with domestic sewage with an average influent chemical oxygen demand (COD) of 358+/-110mg/L. The average effluent COD values were 121+/-31, 208+/-54, 233+/-52, and 227+/-51mg/L, for PU, VC, SP, and PE, respectively. A modified first-order kinetic model was adjusted to temporal profiles of COD during a batch cycle, and the apparent kinetic constants were 0.52+/-0.05, 0.37+/-0.05, 0.80+/-0.04, and 0.30+/-0.02h(-1) for PU, VC, SP, and PE, respectively. Specific substrate utilization rates of 1.08, 0.11, and 0.86mg COD/mgVS day were obtained for PU, VC, and PE, respectively. Although SP yielded the highest kinetic coefficient, PU was considered the best support, since SP presented loss of chemical constituents during the reactor's operational phase. In addition, findings on the microbial community were associated with the reactor's performance data. Although PE did not show a satisfactory performance, an interesting microbial diversity was found on its surface. Based on the morphology and denaturing gradient gel electrophoresis (DGGE) results, PE showed the best capacity for promoting the attachment of methanogenic organisms, and is therefore a material that merits further analysis. PU was considered the most suitable material showing the best performance in terms of efficiency of solids and COD removal.     

Prenatal diagnosis of mosaicism for triploidy and trisomy 13

Mosaicism for trisomy 13 and triploidy was detected by amniocentesis performed at 18 weeks' gestation because of fetal anomalies. Pregnancy continued and a live-born male was delivered vaginally at 37 weeks. The infant had features common to both trisomy 13 and triploidy: intrauterine growth retardation (IUGR), small abnormal ears, cleft palate, and a small jaw. In addition, he had complete cutaneous syndactyly of fingers 3 and 4 and partial syndactyly of the toes, as seen in triploidy. Mixoploidy for trisomy 13 and triploidy was confirmed postnatally in blood, skin, and placenta. Examination of chromosome heteromorphisms and DNA markers suggested the presence of two maternal contributions in the triploid cell line. In addition, the extra chromosome 13 in the trisomic cell line was derived from the mother. Copyright © 2001 John Wiley & Sons, Ltd.     

Prenatal diagnosis of a 45,X male with a SRY-bearing chromosome 21

Male phenotype associated with a 45,X karyotype is an infrequent finding. We present a case diagnosed prenatally on amniocentesis performed for maternal age. The male phenotype was associated with a translocation of a distal part of Yp including the pseudoautosomal SHOX gene and SRY gene on the short arm of a chromosome 21. By DNA analysis we could show that the X chromosome was of maternal origin and that the breakpoint was in interval 3 of the Y chromosome. Mechanisms and genetic counselling are discussed based on a review of published cases of 45,X and XX males. Copyright © 2002 John Wiley & Sons, Ltd.     

Role of vitamin A in the haematotoxicity of hexachlorocyclohexane (HCH) in the rat.

The haematotoxicity of technical hexachlorocyclohexane (HCH) (1000 ppm) was investigated in male albino rats fed with diet free of vitamin A or containing vitamin A at 2000 or 10(5) I.U./kg. Assessment of HCH-induced haematotoxicity at the end of the 7 weeks feeding period was done on the basis of haemoglobin content, total count of red blood cells and white blood cells and the differential counts of the white blood cells as well as by parameters such as packed cell volume, mean corpuscular volume, mean corpuscular haemoglobin, mean corpuscular haemoglobin content, prothrombin time and clotting time. In the rats fed with vitamin A-free diet containing HCH, significant reductions were noticed in the total white blood cells count, clotting time and prothrombin time indicating severe haematotoxicity. Differential count of the white blood cells of these rats revealed a non-significant reduction in the lymphocyte count. The only indication of haematotoxicity caused by hexachlorocyclohexane in the vitamin A supplemented rats was a slight but statistically significant reduction of the total count of white blood cells. These results demonstrate that the haematotoxicity of hexachlorocyclohexane in the rats is enhanced by vitamin A-deficiency and its supplementation particularly in excess but not at hypervitaminotic level is protective against the toxicity.     

Reproduction and population dynamics of the fissiparous brittle star Ophiactis savignyi (Echinodermata: Ophiuroidea)

Reproductive cycle, asexual reproduction, and population dynamics of the fissiparous brittle star, Ophiactis savignyi, which inhabits the exhalant passages of the sponge Haliclona sp. were examined monthly from February 1991 to January 1992 at Wanlitung, southern Taiwan (22°N; 120°E). Mature gametes were found from March to December, but release was mainly in May and June. Sexual recruits were found from May to December, with the highest frequency (14.1% of population) in June. Sexual recruits composed 2.4% of the 1-yr sample. Sex ratio of male to female was 24:1. Fission occurred throughout the year, although the frequency of recently split individuals was lower from January to June (6 to 31%), and higher from July to December (42 to 52%). The occurrence of fission was highest after spawning. Regenerating individuals composed 48.2% of the 1-yr sample. Population density fluctuated greatly during summer due to recruitment by fission and mortality or dispersal due to the stressful environmental conditions. Both sexual and asexual reproduction of O. savignyi were successful at this site.