Assessing Respiratory Morbidity Through Pollution Status and Meteorological Conditions for Delhi

The study focuses on assessing the status of respiratory morbidity in Delhi over a four years period from 2000–2003. An attempt was made to investigate the role of important pollutants (SO₂, NO₂, SPM and RSPM) and various meteorological factors (temperature minimum & maximum, relative humidity at 0830 and 1730 hrs. and wind speed) in being responsible for respiratory admissions on account of COPD, asthma and emphysema. The study showed that winter months had greater exposure risk as pollutants often get trapped in the lower layers of atmosphere resulting in high concentrations. Statistical analysis revealed that two pollutants have significant positive correlation with the number of COPD cases viz., SPM (r = 0.474; p < 0.01) and RSPM (r = 0.353; p < 0.05), while a meteorological factor temperature (minimum) has a significant negative correlation (r = −0.318; p < 0.05) with COPD. Stepwise multiple regression analysis was performed for COPD as dependent variable and R² value of 0.33 was obtained indicating that SPM and RH(1730) were able to explain 33 percent variability in COPD. The partial correlation of SPM and RH(1730) on COPD was higher than any other combination and therefore they can be regarded as important contributing variables on COPD.     

Coupling fishery dynamics,human health and social learning in a model of fish-borne pollution exposure

Pollution-induced illnesses are caused by toxicants that result from human activity and are often entirely preventable. However, where industrial priorities have undermined responsible governance, exposed populations must reduce their exposure by resorting to voluntary protective measures and demanding emissions abatement. This paper presents a coupled human–environment system model that represents the effects of water pollution on the health and livelihood of a fishing community. The model is motivated by an incident from 1949 to 1968 in Minamata, Japan, where methylmercury effluent from a local factory poisoned fish populations and humans who ate them. We model the critical role of risk perception in driving both social learning and the protective feedbacks against pollution exposure. These feedbacks are undermined in the presence of social misperceptions such as stigmatization of the injured. Through numerical simulation and scenario analysis, we compare our model results with historical datasets from Minamata, and find that the conditions for an ongoing pollution epidemic are highly unlikely without social misperception. We also find trade-offs between human health outcomes, the viability of the polluting industry and the survival of the fishery. We conclude that an understanding of human–environment interactions and misperception effects is highly relevant to the resolution of contemporary pollution problems, and merits further study.     

Promoting artificial recharge to enhance groundwater potential in the lower Bhavani River basin of South India using geospatial techniques

Environmental Science and Pollution Research - The artificial recharge is an alternative technique to augment surface water and groundwater and for providing continuous supply of water to the...     

Renewable energy powered evacuated tube collector refrigerator system

This article presents a numerical study of an Evacuated Tube Collector (ETC) based Ammonia-Water absorption refrigeration system. This system utilizes solar energy as an energy source and does not depend on conventional energy sources for its operation. The present system involves the use of hot water as an energy carrier for generator in an absorption system. The analysis system is based on computational model being developed and the thermodynamic properties of working fluids have been used from the computer code. The variation of performance parameters such as heat load of different components, exergy loss, COP_COOLING, COP_HEATING and Exergy efficiency are studied with varying generator temperature. The results indicate that COP_COOLING as well COP_HEATING lies in the range of 0.012–0.498 and 1.012–1.498 respectively and the values obtained are based on the maximum available solar intensity of 0.9 kW/m² which corresponds to the collector area of about 431.7 m² and hot water in the range of 90 °C. It is concluded that the maximum exergy loss is in generator and it is lowest in condenser. The ETC based absorption refrigeration system can be powered by renewable energy sources and does not employ ozone depleting substances.     

Brainstem auditory evoked responses in young urban and rural boys--a comparison

Brainstem auditory evoked responses (BAER) were studied in a total of 194 boys in the age group between 10-15 yrs taken from a busy metropolitan city and also from a relatively quiet town in order to compare their values and to look into the probable cause of the difference between them, if any. BAER were tested with the help of Compact-4 (Nicolet, USA) instrument using the standard technique. In general, the BAER values of the two sample populations were found to be almost similar with no gross differences in terms of peak latency and inter peak latencies. The values were found to be comparable to adult male values as reported earlier.     

Iron and aluminium based adsorption strategies for removing arsenic from water

Arsenic is a commonly occurring toxic metal in natural systems and is the root cause of many diseases and disorders. Occurrence of arsenic contaminated water is reported from several countries all over the world. A great deal of research over recent decades has been motivated by the requirement to lower the concentration of arsenic in drinking water and the need to develop low cost techniques which can be widely applied for arsenic removal from contaminated water. This review briefly presents iron and aluminium based adsorbents for arsenic removal. Studies carried out on oxidation of arsenic(III) to arsenic(V) employing various oxidising agents to facilitate arsenic removal are briefly mentioned. Effects of competing ions, As:Fe ratios, arsenic(V) vs. arsenic(III) removal using ferrihydrite as the adsorbent have been discussed. Recent efforts made for investigating arsenic adsorption on iron hydroxides/oxyhydroxides/oxides such as granular ferric hydroxide, goethite, akaganeite, magnetite and haematite have been reviewed. The adsorption behaviours of activated alumina, gibbsite, bauxite, activated bauxite, layered double hydroxides are discussed. Point-of-use adsorptive remediation methods indicate that Sono Arsenic filter and Kanchan™ Arsenic filter are in operation at various locations of Bangladesh and Nepal. The relative merits and demerits of such filters have been discussed. Evaluation of kits used for at-site arsenic estimation by various researchers also forms a part of this review.     

An empirical approach to assessing generic adaptive capacity to tropical cyclone risk in coastal districts of India

Differences in impacts of climate hazards across exposed units are determined by many factors including the severity of the hazard itself, the population that is exposed to the hazard and the coping capacity of the exposed units to the hazard. Coping capacity or adaptive capacity results from a combination of development status (generic capacity) and interventions pertinent to the hazard (specific capacity). This paper explores the extent to which the generic adaptive capacity may explain the variation in tropical cyclone impacts. Therefore this paper offers an empirical approach by which adaptive capacity may be measured and validated against actual outcomes. Results not only validate the role of generic adaptive capacity in explaining variations in impact but also reveal that general development indicators are not very important as far as predicting outcomes is concerned. Those indicators of development that can be linked to the impact process are significant in explaining and predicting impact. This can help identify those aspects of generic adaptive capacity which are important from the perspective of policy action for enhancing adaptive capacity to a particular climate hazard.

Biocatalytic polymeric membranes to decrease biofilm fouling and remove organic contaminants in wastewater: a review

The presence of recalcitrant contaminants in wastewater is major challenge to decrease pollution and associated health issues. As a consequence, membrane technologies have recently attracted industrial attention, yet a major setback of membrane employment is membrane fouling which leads to frequent discarding of membrane modules. More than 45% of all membrane fouling cases are caused by biofilms that are resistant to antimicrobial agents. Here we review polymeric membranes with antifouling properties, with focus on surface properties, fabrication, characterization, biocatalysis using enzymes and application towards the removal of dyes, phenol, pesticides and fertilizers. Nano-engineered fabrication of polymeric membranes allow to decrease fouling by 80–90%. Immobilized oxidoreductases in polymeric membranes allow 65–98% removal contaminants in wastewater.

     

Occurrence,transformation, bioaccumulation,risk and analysis of pharmaceutical and personal care products from wastewater: a review

Almost all aspects of society from food security to disease control and prevention have benefited from pharmaceutical and personal care products, yet these products are a major source of contamination that ends up in wastewater and ecosystems. This issue has been sharply accentuated during the coronavirus disease pandemic 2019 (COVID-19) due to the higher use of disinfectants and other products. Here we review pharmaceutical and personal care products with focus on their occurrence in the environment, detection, risk, and removal.

     

Flow,Organic, and Inorganic Sediment Yields from a Channelized Watershed in the South Carolina Lower Coastal Plain

Many small streams in coastal watersheds in the southeastern United States are modified for agricultural, residential, and commercial development. In the South Carolina Lower Coastal Plain, low‐relief topography and a shallow water table make stream channelization ubiquitous. To quantify the impacts of urbanization and stream channelization, we measured flow and sediment from an urbanizing watershed and a small forested watershed. Flow and sediment export rates were used to infer specific yields from forested and nonforested regions of the urbanizing watershed. Study objectives were to: (1) quantify the range of runoff‐to‐rainfall ratios; (2) quantify the range of specific sediment yields; (3) characterize the quantity and quality of particulate matter exported; and (4) estimate sediment yield attributable to agriculture, development, and channelization activities in the urbanizing watershed. Our results showed that the urban watershed exported over five times more sediment per unit area compared with the forested watershed. Sediment concentration was related to flow flashiness in the urban watershed and to flow magnitude in the forested watershed. Sediments from the forested watershed were dominated by organic matter, whereas mineral matter dominated sediment from the urban stream. Our results indicated that a significant shift in sediment quality and quantity are likely to occur as forested watersheds are transformed by urbanization in coastal South Carolina.