Heavy Metal Contents and Magnetic Properties of Playground Dust in Hong Kong

This study examined the levels of seven heavy metals (namelyzinc, copper, cadmium, chromium, lead, manganese and iron) andtheir associations with magnetic properties in playground dustof Hong Kong. Results showed that the playground dust containedhigh concentrations of Zn (mean = 1883 g g^-1), Cu(mean = 143 g g^-1) and Cr (mean = 263 g g^-1).Qualitative examination of dust samples under microscope indicated local traffic as one of the important pollutant sources. Magnetic measurements indicated that these anthropogenicpollutants mainly consisted of coarse-grained multidomain (MD) ferrimagnetic minerals. Superparamagnetic (SP), stable single domain (SSD) ferrimagnetic grains and non-ferrimagnetic mineralswere present in relatively small amounts. Significant correlations between heavy metals and various magnetic parametersindicated a strong affinity of heavy metals to magnetic minerals hence pointed out the potential of magnetic properties for simpleand rapid proxy indications of heavy metal pollution in playground dust.     

Thermal and Rheological Properties of Commercial-Grade Poly(Lactic Acid)s

Poly(lactic acid) is the subject of considerable commercial development by a variety of organizations around the world. In this work, the thermal and rheological properties of two commercial-grade poly(lactic acid)s (PLAs) are investigated. A comparison of the commercial samples to a series of well-defined linear and star architecture PLAs provides considerable insight into their flow properties. Such insights are valuable in deciding processing strategies for these newly emerging, commercially significant, biodegradable plastics. Both a branched and linear grade of PLA are investigated. The crystallization kinetics of the branched polymer are inferred to be faster than the linear analog. Longer relaxation times in the terminal region for the branched material compared to the linear material manifests itself as a higher zero shear rate viscosity. However, the branched material shear thins more strongly, resulting in a lower value of viscosity at high shear rates. Comparison of the linear viscoelastic spectra of the branched material with the spectra for star PLAs suggests that the branched architecture is characterized by a span molecular weight of approximately 63,000 g/mol. The present study conclusively demonstrates that a wide spectrum of flow properties are available through simple architectural modification of PLA, thus allowing the utilization of this important degradable thermoplastic in a variety of processing operations.     

Sonographic features of ileal duplication cyst at 12 weeks

Enteric duplication cyst is a congenital abnormality that is believed to arise from abnormal recanalization of the bowel during embryogenesis. Previous reports suggest that the condition may be suspected prenatally by sonographic demonstration of an intra-abdominal cystic mass in the second and third trimesters. We present the sonographic features of a fetus with ileal duplication cyst at 12 weeks of gestation, which show that the condition may present in the first trimester of pregnancy. Copyright © 2002 John Wiley & Sons, Ltd.     

Determination of chemical characterizations of activated carbons from various raw materials

The objectives of this research were to identify the surface chemical features of activated carbons made of peat, bituminous coal and coconut shell, as well as examine the specific relationship of these properties by using statistical analyses. The results showed that the peat carbons contained much more amounts of Ca, S, P and Mg; however, the bituminous carbons possessed higher contents of Si, Al and Fe. In addition, the content ratios of Al to Si exhibited the Al enrichment phenomenon occurred after the heat treatment. A nonlinear correlation between the pH value and the difference in the amounts of basic and acidic groups was developed. Unfortunately, there were no specific mass ratios found among the acidic functional groups. The results of correspondence analysis (CA) gave a promising confirmation about the EDXRF analysis; moreover, the results of factor analysis (FA) fairly agreed with the findings suggested by CA. Both could explain the specific chemical features of activated carbons made from different materials, especially the CA could differentiate each other in detail.     

Organotins and imposex in the rock shell, Thais clavigera, from oyster mariculture areas in Taiwan

The amounts of organotin compounds such as butyltins [sigma BTs: tributyl- (TBT), dibutyl- (DBT), monobutyl- (MBT)] and phenyltins [sigma PhTs: triphenyl- (TPhT), diphenyl- (DPhT) and monophenyl- (MPhT)] in rock shells, Thais clavigera, from the northern (Shiangsan), central (Lukang) and southern (Chiku) Taiwan oyster mariculture areas varied with season and location. High values of sigma BTs (mainly TBT) and low values of sigma PhTs (mainly TPhT) were found during winter (January 1999) at Shiangsan, while high amounts of sigma PhTs (mainly TPhT) and low sigma BTs (mainly TBT) were found during summer (August 1998) at Lukang. The snails were also affected by imposex. Imposex at Shiangsan, Lukang and Chiku increased from 67.1, 59.3 and 36.7% in summer to 100, 100 and 80% in winter, respectively. Relative penis size indices similar trend at Chiku site. No male displayed rock shells were found at Shiangsan and Lukang in winter. Linear correlations between pseudopenis length versus TBT (r = 0.7655, P < 0.001), DBT (r = 0.4253, P < 0.05), MBT (r = 0.5865, P < 0.01) and TPhT (r = -0.6160, P < 0.01) were obtained significant. Among 200 samples, significant positive correlations between length (pseudopenis/shell) ratio of female versus TBT (r = 0.6944, P < 0.005) and sigma BTs (r = 0.6413, r < 0.01) were also observed. The weak correlations between length (pseudopenis/shell) ratio of female versus DBT (r = 0.3085) and MBT (r = 0.4240, P < 0.1) and TPhT (-0.4917, P < 0.05; negative correlation) could indicate that DBT, MBT and TPhT have little or no effect on the development of imposex in rock shells.     

The efficiency of the multi-walled carbon nanotubes used for antibiotics removal from wastewaters generated by animal farms

Environmental Science and Pollution Research - In the recent years, residual antibiotics are considered to be emerging environmental pollutants due to their continuous input and persistence into...     

气浮/曝气生物滤池/多级过滤/离子交换工艺在印染中水回用中的应用

以宁波某印染企业印染中水回用工程为例,对已建工程进行了具体介绍和分析,探讨了气浮/曝气生物滤池(BAF)/多级过滤/离子交换工艺在印染中水回用中的应用.结果表明,在染色机清污分流的基础上,气浮/BAF/多级过滤/离子交换工艺可以成功应用于印染中水回用,同时具有良好的环境效益和经济效益.     

Enhanced degradation of bioremediation residues in petroleum-contaminated soil using a two-liquid-phase bioslurry reactor

A study was performed to determine the potential of two-liquid-phase (TLP) bioslurry reactors using silicon oil as solvent for degradation of residual contaminants in petroleum-contaminated soil. The residues were characterized by gas chromatography–mass spectrometry and electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry. This allowed for the identification of a mixture of residual biomarkers, metabolic byproducts, oxygenated and hetero-polynuclear aromatic hydrocarbons in the contaminated soil. The removal amount of total extractable organics (TEO) was 15 900 mg kg⁻¹ soil in the TLP reactor within 12 weeks. However, TEO remained intact in the bioslurry reactor without the addition of silicon oil for the duration of the experiment, due to high toxicity of metabolites to the microorganisms. The availability of TEO was calculated using a mild extraction with Triton X-100, and the amount of TEO extracted was in accord with the amount of biodegraded TEO. Significantly reduced toxicity in soil was observed at week 12 through TLP remediation. Dehydrogenase activity in the bioslurry reactor was strongly suppressed. Fluorescein diacetate was significantly hydrolyzed by the composition of bioremediation residues in the contaminated soil. Microbial adhesion to the solvent was revealed by the determination of microbial activity in the water-immiscible-liquid.     

Nomogram for Relating Particle and Particle Cloud Parameters

Three concentration units, i.e., mass density, number density, and surface area, often are alternatively used to describe an aerosol cloud. While most aerosol clouds are composed of poly-disperse particles, the nomogram based upon monodisperse spherical particles (Figure 1) has been found useful for relating these different concentration values.     

Carbonyl emissions from commercial cooking sources in Hong Kong

Cooking fumes are an important carbonyl emission source, especially in a highly urbanized city, such as Hong Kong. Cooking exhaust from 15 commercial kitchens of a variety of cooking styles was sampled and analyzed for a suite of 13 carbonyl compounds. Carbonyl compositions were varied among the different cooking styles. Formaldehyde was generally the most abundant carbonyl, and its contribution to the total carbonyl amount on a molar basis ranged from 12 to 60%. Acrolein was also found to be an abundant carbonyl in the cooking exhaust. The highest contribution by acrolein to the total carbonyls was found to be 30% in the exhaust of a western-style steak restaurant. Long-chain saturated carbonyls, that is, heptanal, octanal, and nonanal, accounted for a significant fraction (> 40%) of the total carbonyls in kitchens that always used heated cooking oils. Two dicarbonyls, glyoxal and methylglyoxal, had a various presence in the cooking emissions, ranging from negligible to 10%. The presence of benzaldehyde and tolualdehyde was mostly negligible in the sampled kitchen exhaust. Annual emission rates of both individual carbonyls and total carbonyls were estimated for various types of commercial kitchens. Local-style fast-food shops contributed the highest total carbonyl emissions per year mainly because of the large number of this kind of restaurant in Hong Kong. The citywide annual emission rates of the three most toxic carbonyls, formaldehyde, acetaldehyde, and acrolein, were estimated assuming that the limited number of sampled restaurants were representative of the average restaurants. Such estimates of carbonyl emission rates were comparable to the estimated carbonyl emissions from vehicular sources, suggesting the importance of commercial cooking as a source for carbonyls in Hong Kong.