Sorption studies of heavy metal ions on a novel chelating resin and its application in the stripping of mercury (II)

A chelating resin containing a stable thiol group was synthesised, using polystyrene as the starting material. The resin is stable towards conc. HCl, 0.1M HNO(3) and 0.1M NaOH. The resin shows affinity towards Ag(+), Hg(2+), Bi(3+), Pb(2+), Cu(2+), Zn(2+) and Cd(2+). Extraction of these metal ions as a function of pH, kinetics of exchange and breakthrough capacities is evaluated. The selectivity of the resin for the metal ions is in the order Ag(+) > Hg2+ > Cu2+ > Pb2+ > Cd2+ > Zn2+. The equilibrium constants for exchange and kinetics of exchange are favourable for the recovery of mercury from lean sources. Application of the resin in the stripping of mercury from chlor-alkali plant affluent, and in the enrichment of mercury from seawater, have been investigated. Mercury sorbed resin can be regenerated using 5% thiourea in 0.1M HCl.     

Prenatal sonographic diagnosis of metastatic neuroblastoma: Report of a case and review of the literature

Congenital malignant tumours are rare. Neuroblastoma is the most common solid tumour, accounting for about 30–50 per cent of tumours evident during the neonatal period. A case of metastatic, rapidly growing neuroblastoma, diagnosed prenatally by ultrasound at 32 weeks' gestation, is presented.     

1998年珊瑚死亡事件对肯尼亚珊瑚礁和渔业的影响

为了评价1998年珊瑚脱色和死亡事件的影响,在南肯尼亚收集了有关珊瑚礁生态系统和渔业的数据.我们比较了1998年前3年和后3年在未经捕捞的海洋公园和经受捕捞的珊瑚礁区中的海底覆盖物、海胆和鱼类丰度及与珊瑚礁有关的渔业.     

Alphafetoprotein,cholinesterases and rapidly adhering cells in the prenatal diagnosis of neural tube defects

Amniotic fluid cholinesterases tested on polyacrylamide gel and rapidly adhering cell analysis were compared in their efficiency at diagnosing fetal neural tube defects in three cases where the alphafetoprotein results were equivocal. While rapidly adhering cells were also equivocal, the cholinesterases consistently gave a clear indication of fetal abnormality.     

Characterization of airborne particles at a high-btu coal-gasification pilot plant

Airborne particles in fugitive emissions have been measured at a slagging fixed-bed coal-gasification pilot plant using lignite. Sampling was conducted during shutdown operations and opening of the gasifier following an aborted startup. Aerosol collected with a Sierra high-volume impactor was subjected to analysis by gas chromatography, mass spectrometry, and scanning electron microscopy; aerosol collected with an Andersen low-volume impactor was subjected to flameless atomic absorption analysis. The data show that the bulk of the trace organic material is associated with small particles: these data are similar to data on ambient air reported in the literature. Particle morphologies resemble those of fly ash from coal combustion, including smooth spheres, vesicular spheres, and crystalline material. Trace element size distributions are bimodal and resemble data for ambient air. Pb-containing particles are generally submicron, while particles containing Al, Fe, and other crustal species are mostly of supermicron size. Aluminum-based aerosol enrichment factors calculated from the lignite composition show that the composition of the aerosol resembles that of the coal, with the exception of modest enrichments of Mg, Na, As, and Pb in the submicron size range. Aerosol enrichment factors based on the earth's crustal composition are somewhat greater than those based on coal composition for several elements, suggesting potential errors in using crustal enrichment data to investigate chemical fractionation during aerosol formation.     

Ecological Monitoring and Assessment Network's Proposed Core Monitoring Variables: An Early Warning of Environmental Change

This article reports on the evaluation of existing ecologicalmonitoring variables from a variety of sources to select a suiteof core variables suitable for monitoring at the Ecological Monitoring and Assessment Network (EMAN) sites located acrossCanada. The purpose of EMAN is to promote the acquisition of relevant and consistent data that can be used to report on national trends and provide an early warning of ecosystem change. Existing monitoring variables were evaluated in twosteps. In the first step, three primary criteria were used to pre-screen preliminary variables. In the second step, a moredetailed evaluation considered twenty criteria based on dataquality, applicability, data collection methods, data analysisand interpretation, existing data and programs, and cost effectiveness to select a draft set of core monitoring variables(CMV). An ecological framework was developed to organize the CMVin a manner that permitted a gap analysis to confirm the CMV assessed a wide range of relevant environment components. Thesuite of CMV were then tested to determine their effectiveness in detecting ecosystem change caused by stressors with ecosystemresponses that have been well documented in the literature. Thisproject is part of a process lead by Environment Canada to select CMV to detect and track ecosystem change at EMAN sites. It is anticipated that the proposed CMV will undergo future discussion and development leading to the final selection of asuite of CMV for use at EMAN sites.     

Characterization of airborne trace metal and trace organic species from coal gasification

Fugitive emissions from a slagging fixed-bed coal-gasification pilot plant were analyzed by flameless atomic absorption spectrophotometry, gas chromatography, and mass spectrometry for trace metal and trace organic species. Analysis of the size distributions of airborne particulate matter inside the plant showed an abundance of large metal-containing particles; outdoor distributions in the vicinity of the plant resembled the indoor distributions, suggesting the importance of the gasifier in influencing ambient air quality. This conclusion was further supported by identification of similar organic compounds inside and outside the plant. Trace element enrichment factors based on the earth's crustal composition were greater than those based on the composition of the lignite used in the gasifier, showing the importance of characterizing the proper source material when inverstigating chemical fraction during aerosol formation. Enrichments in the present study were much greater than those found in previous sampling during aborted start-up and cleaning procedures, where normal operating temperatures had not yet been reached. Both studies showed evidence of enrichment factors which decreased with increasing particle size. Although much of the airborne mass was associated with large particles having low respirability, the high concentrations of some metals indoors suggests that further assessment of potential occupational exposures is warranted.     

Environmental Monitoring Of Remedial Dredging At The New Bedford Harbor, Ma, Superfund Site

New Bedford Harbor (NBH), MA, is a Superfund site because of high polychlorinated biphenyl (PCB) concentrations in the sediment. From April 1994 to September 1995, a remedial dredging operation (termed the “Hot Spot”) removed the most contaminated sediments (PCB concentrations greater than 4000μg/g) from the upper harbor. During remediation, a monitoring program assessed the potential environmental impacts to NBH and adjacent Buzzards Bay. The monitoring program was developed with input from federal, state, and local authorities. Site-specific decision criteria were established to assess net PCB transport, water column toxicity, and PCB bioaccumulation in blue and ribbed mussels (Mytilus edulis and Geukensia demissa, respectively). The remediation was completed without exceeding PCB net transport or acute toxicity effects specified in the decision criteria. In addition, PCB bioaccumulation in mussels during this time period was not significantly greater than pre- or post-operational measurements. The results indicated that approximately 14000 cubic yards of highly PCB contaminated sediment were permanently removed with minimal environmental effects. The lessons learned during this operation, as well as previous pilot studies at the site, will be used to make full-scale remedial efforts in NBH more efficient and environmentally protective.     

Electrofishing in boatable rivers: Does sampling design affect bioassessment metrics?

Data were collected from 60 boatable sites using an electrofishing design that permitted comparisons of the effects of designs and distances on fish assemblage metrics. Sites were classified a priori as Run-of-the-River (ROR) or Restricted Flow (RF). Data representing four different design options (i.e., 1000 and 2000 m for both single and paired banks) were extracted from the dataset and analyzed. Friedman tests comparing metric values among the designs detected significant differences for all richness metrics at both types of sites and for catch per unit effort and percent tolerant species at ROR sites. Richness metrics were generally higher for the two 2000-m designs than for the two 1000-m designs. When plotted against cumulative electrofishing distance, the percent change in metrics declined sharply within approximately 1000 m, after which metrics usually varied by less than 10%. These data demonstrate that designs electrofishing 1000 m of shoreline are sufficient for bioassessments on boatable rivers similar to those in this study, regardless of whether the shoreline is along a single bank or distributed equally among paired banks. However, at sites with depths greater than 4 m, it may be advisable to employ nighttime electrofishing or increase day electrofishing designs to 2000 m.The U.S. Governments right to retain a non-exclusive, royalty free licence in and to any copyright is acknowledged.