HYDROLOGIC EFFECTS OF CLIMATE CHANGE IN THE DELAWARE RWER BASIN1

ABSTRACT: The Thornthwaite water balance and combinations of temperature and precipitation changes representing climate change were used to estimate changes in seasonal soil-moisture and runoff in the Delaware River basin. Winter warming may cause a greater proportion of precipitation in the northern part of the basin to fall as rain, which may increase winter runoff and decrease spring and summer runoff. Estimates of total annual runoff indicate that a 5 percent increase in precipitation would be needed to counteract runoff decreases resulting from a warming of 2°C; a 15 percent increase for a warming of 4°C. A warming of 2° to 4°C, without precipitation increases, may cause a 9 to 25 percent decrease in runoff. The general circulation model derived changes in annual runoff ranged from ?39 to +9 percent. Results generally agree with those obtained in studies elsewhere. The changes in runoff agree in direction but differ in magnitude. In this humid temperate climate, where precipitation is evenly distributed over the year, decreases in snow accumulation in the northern part of the basin and increases in evapotranspiration throughout the basin could change the timing of runoff and significantly reduce total annual water availability unless precipitation were to increase concurrently.     

Managing petroleum refining wastes by thermal desorption

The U.S. Environmental Protection Agency has developed regulations under the Hazardous and Solid Waste Amendments (HSWA) of 1984 to restrict the land disposal of hazardous wastes. As a result of the regulations, all hazardous wastes to be placed on the land must meet treatment standards based on the performance of the best demonstrated available technology (BDAT) identified for individual waste classifications. The Marathon Oil Company is currently evaluating innovative technologies for managing listed waste materials, with a focus on waste minimization and recycling. Remediation Technologies, Inc. (ReTeC) has conducted testing on wastewater treatment sludges from three Marathon refineries using a proprietary thermal desorption technology. The results from these tests have demonstrated that the technology has the ability to consistently meet BDAT treatment standards, while preferentially separating and condensing residual moisture and oils from the material.     

SOIL MOISTURE SENSORS FOR CONTINUOUS MONITORING1

ABSTRACT: Certain physical and chemical properties of soil vary with soil water content. The relationship between these properties and water content is complex and involves both the pore structure and constituents of the soil solution. One of the most economical techniques to quantify soil water content involves the measurement of electrical resistance of a dielectric medium that is in equilibrium with the soil water content. The objective of this research was to test the reliability and accuracy of fiberglass soil-moisture electrical resistance sensors (ERS) as compared to gravimetric sampling and Time Domain Reflectometry (TDR). The response of the ERS was compared to gravimetric measurements at eight locations on the USDA-ABS Walnut Gulch Experimental Watershed. The comparisons with TDR sensors were made at three additional locations on the same watershed. The high soil rock content (≥45 percent) at seven locations resulted in consistent overestimation of soil water content by the ERS method. Where rock content was less than 10 percent, estimation of soil water was within 5 percent of the gravimetric soil water content. New methodology to calibrate the ERS sensors for rocky soils will need to be developed before soil water content values can be determined with these sensors.     

EXAMINING LAND USE INFLUENCES ON STREAM HABITATS AND MACROINVERTEBRATES: A GIS APPROACH1

ABSTRACT: Geographic Information Systems (GIS) were used to assess the relationships between land use patterns and the physical habitat and macroinvertebrate fauna of streams within similar sized watersheds. Eleven second or third order watersheds ranging from highly urbanized to heavily forested were selected along Lake Superior's North Shore. Land use patterns within the watersheds were quantified using readily available digital land use/land cover information, with a minimum mapping resolution of 16 ha. Physical habitat features, describing substrate characteristics and stream morphology, were characterized at sample points within each stream. Principle component and correlation analyses were used to identify relationships between macroinvertebrates and stream physical habitat, and between habitat and land use patterns. Substrate characteristics and presence of coarse woody debris were found to have the strongest correlations with macreinvertebrate assemblage richness and composition. Agricultural and urban land use was correlated with substrate characteristics. Algal abundance, associated with macroinvertebrate compositional differences, was correlated with housing density and non-forest land covers. The use of readily available spatial data, even at this relatively coarse scale, provides a means to detect the primary relationships between land use and stream habitat quality; finer-resolution GIS databases are needed to assess more subtle influences, such as those due to riparian conditions.     

Evaluation of a chemical stabilization process

Environmental Resources Management (ERM) performed an evaluation of a biosolids chemical stabilization process known as BIO*FIX®, marketed by Bio Gro Systems, Inc., of Annapolis, Maryland. The purpose of the evaluation was (1) to assess major characteristics of the process and its final product, (2) to determine the quantity and final disposition of all components in the incoming biosolids, and (3) to determine if the process conforms to new regulations promulgated and administered by the U.S. Environmental Protection Agency (EPA) titled “Standards for the Use or Disposal of Sewage Sludges” (40 CFR Part 503). The BIO*FIX® chemical stabilization process involves the addition of calcium oxide (CaO) to dewatered biosolids at rates that achieve the pathogen reduction and vector attraction reduction requirements of the 503 program while creating a marketable end product used as an agricultural amendment. ERM's project involved the testing of four process streams in order to create a mass balance on the process. Laboratory analyses were performed on samples of the dewatered biosolids, the chemically-stabilized end product, and the scrubber water effluent. The primary components of concern tested in the above process streams were ammonia, metals, odorous compounds, particulate matter, and organic matter. Through the tests described in the article, ERM drew the following conclusions: (1) The major gaseous pollutant resulting from the BIO*FIX® process is gaseous ammonia. The total gaseous ammonia released from the product depends on the ammonia nitrogen content of the biosolids, and pH and temperature levels reached in the process. Additional ammonia is emitted when the end product is loaded in trucks and stored. Any gaseous ammonia remaining in the end product after processing will slowly dissipate over time. (2) Other potential odor pollutants such as hydrogen sulfide (H₂S) and mercaptans were found to be below detectable levels in the uncontrolled exhaust gas. (3) Metals were not found in the exhaust gas in any detectable quantities. They would not be expected to volatilize during the process. Particulate matter emissions were found to be very low. (4) The pathogen reduction and vector attraction reduction requirements of the 40 CFR 503 regulations were met or exceeded. (5) Finally, through observations and tests, ERM found that the BIO*FIX® chemical stabilization process provides for a simple, viable, and effective conversion of biosolids into a beneficial use product in compliance with all pertinent regulations.     

Ecologically derived guidelines for managing two New Zealand lakes

Lakes Manapouri and Te Anau, in Fiordland National Park, became the center of a major controversy after the New Zealand government offered their water resource to an overseas aluminum smelting consortium for electricity generation. Although the scheme proceeded, the lake levels were not raised as originally proposed. Rather, government sought guidelines to optimize hydroelectric potential while maintaining ecological stability of the vulnerable, largely forested, glaciated lakeshores. Guidelines were derived by relating the vegetation zonation to the natural lake-level fluctuations recorded daily for 37 years. Ahigh operating range in the upper third of the lakes' natural ranges, based on flood tolerances of the woody shoreline species, restricts both duration and frequency. Alow operating range (ca. lower third) safeguards stability of shoreline sediments by limiting drawn-down rates, duration, and frequency. Themain operating range (ca. middle third) has few limitations. These guidelines, which allow utilization of ca. 93% of the water resource, have now been verified by instances of flooding and draw-down rates that exceeded the natural rates recorded earlier. The guidelines were officially accepted by the government in 1977 as a basis for managing the valuable multiple resources of these two lakes and their environs, and they were formalized in legislation in 1981. The details and merits of the guideline approach are discussed.     

SENSITIVITY OF HIGH-ELEVATION STREAMS IN THE SOUTHERN BLUE RIDGE PROVINCE TO ACIDIC DEPOSITION1

ABSTRACT: The Southern Blue Ridge Province, which encompasses parts of northern Georgia, eastern Tennessee, and western North Carolina, has been predicted to be sensitive to impacts from acidic deposition, owing to the chemical composition of the bedrock geology and soils. This study confirms the predicted potential sensitivity, quantifies the level of total alkalinity and describes the chemical characteristics of 30 headwater streams of this area. Water chemistry was measured five times between April 1983 and June 1984 at first and third order reaches of each stream during baseflow conditions. Sensitivity based on total alkalinity and the Calcite Saturation Index indicates that the headwater streams of the Province are vulnerable to acidification. Total alkalinity and p11 were generally higher in third order reaches (mean, 72 μeq/θ and 6.7) than in first order reaches (64 μeq/θ and 6.4). Ionic concentrations were low, averaging 310 and 340 μeq/θ in first and third order reaches, respectively. A single sampling appears adequate for evaluating sensitivity based on total alkalinity, but large temporal variability requires multiple sampling for the detection of changes in pH and alkalinity over time. Monitoring of stream water should continue in order to detect any subtle effects of acidic deposition on these unique resource systems.     

Soybean row-spacing: Effects on arthropod population patterns and sampling considerations

Two soybean field experiments were conducted during 1979 to investigate the effects of different row-spacing patterns (1.0 m vs 0.5 m, and 1.0 m vs broadcast) on population levels of selected herbivorous and beneficial arthropods. Sweepnet sampling was used in both experiments, and the ground-cloth shake method was also used in the 1.0-m vs 0.5-m study. Sweepnet results suggested that both herbivorous and beneficial arthropods tended to be more abundant in narrow row-spacings. However, there were exceptions among both groups, with some species (for example, bean leaf beetle) being more abundant in the conventional row-spacing in one experiment, and with several other species (for example, bigeyed bugs) showing no significant differences. Also, ground-cloth data for lepidopteran larvae showed trends opposite to those from sweepnet data in the 1,0-m vs 0.5-m experiment. Results clearly illustrate the importance of sampling methodology in the interpretation of soybean row-spacing research.