Reactivity between PbSO4 and CaCO3 particles relevant to the modification of mineral particles and chemical forms of Pb in particles sampled at two remote sites during an Asian dust event

During the transboundary transport of anthropogenic heavy metals by mineral particles providing reaction sites, the divalent metal salt PbSO₄ can be converted to PbCO₃ in the presence of water. We carried out laboratory experiments to study the transformation process under various conditions by incorporating test particles comprising CaCO₃ of a particulate mineral component, PbSO₄, and NaCl. After the immersion of PbSO₄ particles in contact with CaCO₃ particles in a water droplet, the conversion of PbSO₄ into PbCO₃ was confirmed by the change in morphology of the original particles to stick or needle form; the percentages of the chemical forms relative to the total Pb were determined by X-ray absorption near edge structure (XANES) analysis. Approximately 60–80% of PbSO₄ was converted to PbCO₃ after 24 h. A small amount of stick particles was detected when NaCl particles attached to PbSO₄/CaCO₃ particles were exposed to air with a relative humidity (RH) of 80–90% for 24 h. XANES measurements of the samples revealed that the molar percentage of PbCO₃ relative to the total Pb content was 4%.Field experiments were also conducted to determine the chemical forms of the Pb particles during the Kosa (Asian dust storm) event. Samples were collected from two remote sites in Japan and Korea. The mass size distribution of Pb aerosols collected in Japan was bimodal with two peaks in the coarse mode; the enrichment factor of Pb suggested that its source was anthropogenic. Pb L3 edge XANES measurements of both samples indicated that they had similar shapes. These measurements also indicated that the major Pb components for the samples collected in Japan were PbO, PbSO₄ PbCl₂, and PbCO₃, with molar percentages of 44%, 30%, 21%, and 5%, respectively. No significant differences were found between the component ratios of the samples collected in Japan and Korea, suggesting that definite transformation did not occur during the transport of the Kosa particles from Korea to Japan. On the basis of these observations, we postulate that the transformation process either occurred mainly before the particles arrived at Korea or did not take place after the particles left continental Asia.     

Current status of waste to power generation in Japan and resulting reduction of carbon dioxide emissions

We discuss the current status of waste to power generation (WPG) in Japan and various scenarios involving indirect reduction of carbon dioxide emissions by WPG. The number of WPG facilities domestically as of 2005 was 286. Power generation capacity attained 1,515 MW and power generation 7,050 GWh/year. This amount substitutes energy otherwise acquired from natural resources such as fossil fuels in thermal power plants. If the basic unit of carbon dioxide is 0.555 kg-CO₂/kWh, then the corresponding carbon dioxide emission reduction is calculated to be 3.9 million tons, equivalent to 26.7% of the 14.6 million tons emitted by municipal solid waste incinerators (MSWI) in 2005. Using various existing technological options, the power generation efficiency could reach more than 20% in MSWI facilities with capacity of 300 tons/day, although present efficiency is only 12.0%. If about 85% of MSW were incinerated in MSWI with power generation efficiency of 20% as a feasible assumption, the total power generation and the corresponding carbon dioxide reduction would be 16,540 GWh/year and 9.18 million tons, respectively, equivalent to 62.7% of the carbon dioxide emitted by MSWI. Also, the ratio of the additional reduction of carbon dioxide emissions by WPG to the total additional reduction (20,000 ktons/year) in Japan during the first commitment period would be 26.3%, suggesting that promotion of WPG in MSWI is an effective option for prevention of global warming.     

Removal of mercury using processes involving sulfuric acid during zinc production in an imperial smelting process (ISP) plant

Journal of Material Cycles and Waste Management - Mercury emissions from non-ferrous metal industries are a major environmental concern. Because of the large differences in mercury emission factors...     

日本的塑料再循环

"清洁日本中心"是一个与再循环有关的非政府组织.本文综述了由各种类型塑料制成的产品的再循环方法.有一批这样的方法正在使用中或在研究中.重点介绍日本塑料再循环的现状.     

Behavioral and faunal implications of Early Cretaceous deinonychosaur trackways from China

Deinonychosaurian theropods, the dinosaurian sister group of birds, are characterized by a large raptorial claw borne on a highly modified second digit that was thought to be held in a retracted position during locomotion. In this study, we present new trackway evidence for two coeval deinonychosaurian taxa from the Early Cretaceous of Shandong, China that indicate a hitherto unrecognized body size diversity for this period and continent. These fossil tracks confirm diversity and locomotory patterns implied by phylogeny and biogeography, but not yet manifested in the body fossil record. Multiple parallel and closely spaced trackways generated by the larger track maker provide the best evidence yet discovered for gregarious behavior in deinonychosaurian theropods.     

Reduction of Methane Released from Palm Oil Mill Lagoon in Malaysia and Its Countermeasures

Palm oil industry in Malaysia is one of the potential candidates for the CDM project because large amount of methane is emitted from the lagoons and open digesting tank of the wastewater treatment system. Therefore the first objective of the project is to investigate the actual GHG emission from the lagoons and open digesting tank in palm oil mills in order to establish the baseline for CDM project. Results indicated that methane contribution to biogas released from the open digesting tank and lagoon systems were 35% and 45%, respectively. These values are much lower than the reported value of 65% obtained by complete anaerobic condition of lab-scale experiments. Based on actual methane release measurement and information gathered from palm oil mill about wastewater treatment, significant amount of methane emission to the atmosphere can be reduced with the installation of new closed digesting tank system converted from the open digesting tank such as just by covering it with applying CDM. It is estimated that a total of RM2.6 million could be obtained from the selling of electricity generated from biogas generation and Certified Emission Reduction(CER). This revised version was published online in August 2006 with corrections to the Cover Date.     

Improvement of the Bag-Mediated Filtration System for Sampling Wastewater and Wastewater-Impacted Waters

Environmental surveillance of poliovirus (PV) plays an important role in the global program for eradication of wild PV. The bag-mediated filtration system (BMFS) was first developed in 2014 and enhances PV surveillance when compared to the two-phase grab method currently recommended by the World Health Organization (WHO). In this study, the BMFS design was improved and tested for its usability in wastewater and wastewater-impacted surface waters in Nairobi, Kenya. Modifications made to the BMFS included the size, color, and shape of the collection bags, the filter housing used, and the device used to elute the samples from the filters. The modified BMFS concentrated 3–10 L down to 10 mL, which resulted in an effective volume assayed (900–3000 mL) that was 6–20 times greater than the effective volume assayed for samples processed by the WHO algorithm (150 mL). The system developed allows for sampling and in-field virus concentration, followed by transportation of the filter for further analysis with simpler logistics than the current methods. This may ultimately reduce the likelihood of false-negative samples by increasing the effective volume assayed compared to samples processed by the WHO algorithm, making the BMFS a valuable sampling system for wastewater and wastewater-impacted surface waters.     

芦竹抑藻物质的初步分离及抑制铜绿微囊藻的效果

采用乙酸乙酯提取芦竹(Arundo donax Linn.)得到高效抑藻粗提物,其对产毒铜绿微囊藻的半效应抑制浓度(EC50.6d)为50mg·1-1.粗提物经溶剂萃取分离得到中/碱性物质及酸性物质.活性分析表明,酸性物质有显著抑制铜绿微囊藻的活性.通过酸性氧化铝柱层析进一步分离酸性物质,得到三组弱极性抑藻物质及一组强极性抑藻物质.培养3d后,四组抑藻物质在10mg·1-1时的抑藻率分别为82%,83%,100%以及70%.