A mass transfer model of ammonia volatilisation from anaerobic digestate

Anaerobic digestion (AD) is becoming increasingly popular for treating organic waste. The methane produced can be burned to generate electricity and the digestate, which is high in mineral nitrogen, can be used as a fertiliser. In this paper we evaluate potential losses of ammonia via volatilisation from food waste anaerobic digestate using a closed chamber system equipped with a sulphuric acid trap. Ammonia losses represent a pollution source and, over long periods could reduce the agronomic value of the digestate. Observed ammonia losses from the experimental system were linear with time. A simple non-steady-state partitioning model was developed to represent the process. After calibration, the model was able to describe the behaviour of ammonia in the digestate and in the trap very well. The average rate of volatilisation was approximately 5.2 g N m^?2 week^?1. The model was used to extrapolate the findings of the laboratory study to a number of AD storage scenarios. The simulations highlight that open storage of digestate could result in significant losses of ammonia to the atmosphere. Losses are predicted to be relatively minor from covered facilities, particularly if depth to surface area ratio is high.     

A review of municipal solid waste composition and quantities in Poland

A review of results of the research involving the quantitative and composition analyses of household waste conducted in Poland in recent years is presented in this paper. For these analyses various methodologies have been employed, as there is not one obligatory methodology how to characterise municipal solid waste. The results of the research in large Polish cities indicate great variability, which is difficult to be reasonably explained. This situation is affected by a number of factors, such as various methods and places for sample collection, various methods for tests, fractional character of most of the studies (studies carried out only in some periods during a year). Consequently, it is neither possible to measurably compare their results, nor to generalise them. Hence, within this article only individual data for large cities is provided. It is therefore necessary to standardise methodology for such analyses in Europe, taking into account local variability (such as different housing patterns, climate and waste collection schemes) to allow comparison of results.Reported yearly household waste generation in Polish cities varies from 238 to 309 kg per inhabitant. Biodegradable waste is a strongly dominated fraction in household waste from Polish cities, followed by paper/cardboard and plastics. Historical data shows that waste composition has undergone profound changes, the most significant being an increase of the share of plastics and decrease of fine fraction. The presented data indicates that waste composition strongly depends on the type of housing and its heating system. In the new multi-family buildings with central heating the share of paper and plastics is higher than in old houses with individual heating. In the latter ones the share of fine fraction is higher.     

Carbon accumulation through ecosystem recovery

A market has emerged for carbon sequestered through reforestation. The opportunity to restore ecosystems through this market rather than establish plantations is demonstrated by an Australian case study. In the state of Queensland there are vast areas that have been cleared relatively recently and could be restored to ecosystems with high resilience and important biodiversity values with appropriate management. In order to foster opportunities for carbon accumulation through ecosystem recovery spatially explicit information on sequestration rates, management recommendations, and clear definitions of ancillary biodiversity benefits need to be defined.     

Impacts of “metals” on human health: a comparison between nine different methodologies for Life Cycle Impact Assessment (LCIA)

This paper looks into the differences and uncertainties in determining the impact of “metals’” emissions on human health, in Life Cycle Impact Assessment (LCIA). Metals are diverse substances, with different properties and characteristics, considered important in LCIA because of their toxicity to humans and ecosystems. First, we defined a list of the most significant metals in terms of impacts on human health. This was done according to precise criteria accounting for both physical and toxic properties of the metals. Second, we performed an LCIA on different key processes using various existing LCIA methodologies and including also USEtox: the recently developed consensus-model for LCIA. Last, we compared the results in relative terms using a contribution analysis. The analysis showed poor or no agreement between the methods: the relative contribution of each metal and of the metals in total to the total impact on human health changes greatly according to the LCIA method used. These differences are due mainly to the number of metals included in each method and to the technique used to calculate the characterization factors. Results obtained with USEtox show no apparent correlation with results calculated with other methods. At present time USEtox is recommended as the best model for LCIA on human toxicity, but mainly because of the large consensus behind it, because its uncertainties regarding metals are still high. The study gives a good and simple overview regarding the way different methods address the impact assessment for metals, and helps in the interpretation of LCIA results for actual LCA studies where metal emissions are involved.     

Immobilized Fe (III)-doped titanium dioxide for photodegradation of dissolved organic compounds in water

Photocatalytic degradation of dissolved organic carbon (DOC) by utilizing Fe(III)-doped TiO₂ at the visible radiation range is hereby reported. The photocatalyst was immobilized on sintered glass frits with the coating done by wet method, calcinated at 500 °C and then applied in a photodegradation reactor. The addition of a transition metal dopant, Fe(III), initiated the red shift which was confirmed by UV–Vis spectroscopy, and the photocatalyst was activated by visible radiation. X-ray diffraction patterns showed that Fe(III) doping had an effect on the crystallinity of the photocatalysts. Mixtures of DOC and associated coloured solutions were degraded in first-order kinetics, showing that the degradation process was not dependent on intermediates or other species in solution. A reactor with a catalyst coating area of 12.57 cm² was able to degrade 0.623 mg of the dissolved material per minute. Exposure of the reactor to hostile acidic conditions and repeated use did not compromise its efficiency. It was observed that the reactor regenerates itself in the presence of visible light, and therefore, it can be re-used for more than 100 runs before the performance dropped to <95 %. The results obtained indicate that the photocatalyst reactor has a great potential of application for use in tandem with biosorbent cartridges to complement water purification methods for domestic consumption.     

Recycling and reuse of waste from electricity distribution networks as reinforcement agents in polymeric composites

Of the waste generated from electricity distribution networks, wooden posts treated with chromated copper arsenate (CCA) and ceramic insulators make up the majority of the materials for which no effective recycling scheme has been developed. This study aims to recycle and reuse this waste as reinforcement elements in polymer composites and hybrid composites, promoting an ecologically and economically viable alternative for the disposal of this waste. The CCA wooden posts were cut, crushed and recycled via acid leaching using 0.2 and 0.4 N H₂SO₄ in triplicate at 70 °C and then washed and dried. The ceramic insulators were fragmented in a hydraulic press and separated by particle size using a vibrating sieve. The composites were mixed in a twin-screw extruder and injected into the test specimens, which were subjected to physical, mechanical, thermal and morphological characterization. The results indicate that the acid treatment most effective for removing heavy metals in the wood utilizes 0.4 N H₂SO₄. However, the composites made from wood treated with 0.2 N H₂SO₄ exhibited the highest mechanical properties of the composites, whereas the use of a ceramic insulator produces composites with better thermal stability and impact strength. This study is part of the research and development project of ANEEL (Agência Nacional de Energia Elétrica) and funded by CPFL (Companhia Paulista de Força e Luz).     

A comparative assessment of waste incinerators in the UK

The uptake in Europe of Energy from Waste (EfW) incinerator plants has increased rapidly in recent years. In the UK, 25 municipal waste incinerators with energy recovery are now in operation; however, their waste supply chains and business practices vary significantly. With over a hundred more plant developments being considered it is important to establish best business practices for ensuring efficient environmental and operational performance. By reviewing the 25 plants we identify four suitable case study plants to compare technologies (moving grate, fluidised bed and rotary kiln), plant economics and operations. Using data collected from annual reports and through interviews and site visits we provide recommendations for improving the supply chain for waste incinerators and highlight the current issues and challenges faced by the industry. We find that plants using moving grate have a high availability of 87–92%. However, compared to the fluidised bed and rotary kiln, quantities of bottom ash and emissions of hydrogen chloride and carbon monoxide are high. The uptake of integrated recycling practices, combined heat and power, and post incineration non-ferrous metal collections needs to be increased among EfW incinerators in the UK. We conclude that one of the major difficulties encountered by waste facilities is the appropriate selection of technology, capacity, site, waste suppliers and heat consumers. This study will be of particular value to EfW plant developers, government authorities and researchers working within the sector of waste management.     

Experimental Verification of Diffusion Battery Theory

The diffusion battery, an assembly of circular tubes or rectangular channels, is one of the best devices available for measuring the size and size distribution of submicron aerosols in the diameter range 0.002 to 0.2 µ m. The performance of these batteries is known from molecular diffusion theory, but until now has not been checked experimentally in this size range because of the lack of the necessary monodisperse aerosols. Experimental measurements on singly charged monodisperse aerosols from 0.01 µm to 0.1 µ m are described using a General Electric and a Pollak condensation nucleus counter to measure the aerosol penetration through the stages of a set of portable diffusion batteries in series. Particle sizes in the range tested could be selected at will by adjusting the voltage of an electric mobility classifier. The fraction of aerosol of a given size passing through each battery stage was found to agree closely with the penetration calculated from molecular diffusion theory for that size. This shows that the theory is correct and confirms that the aerosol produced by the electric mobility classifier was monodisperse. In addition, it was found that the difference in penetration between a charged versus a neutralized aerosol was insignificant except for the smallest aerosols used.