Optimizing angles of rooftop photovoltaics,ratios of solar to vegetated roof systems,and economic benefits,in Portland,Oregon, USA

This study analyzed insolation data to account for multiple scattering in calculating optimal tilt angles for stationary and seasonally moving photovoltaics on three different roof types in the US Pacific Northwest: vegetated roofs, white roofs, and dark roofs. Using these results, we modeled the energy savings for vegetated roofs and roofs covered in varying numbers of photovoltaic panels. We then calculated the net present value, internal rate of return, and other economic measures for all possible combinations of covering rooftops in mixes of photovoltaic arrays and vegetation, accounting for installation costs, proposed carbon taxes, stormwater management discounts, and other relevant factors. Our results quantify how, in the US Pacific Northwest and similar locations, photovoltaics produce higher returns on investment than do vegetated roofs for new buildings, while vegetated roofs produce better returns on investment than do photovoltaics for older buildings. This is important because in many areas, some buildings have photovoltaics when a vegetated roof would have been more cost and energy efficient, while other buildings have vegetated roofs when photovoltaics would have been more cost and energy efficient. Potential applications include modifying incentive programs and other policies to account properly for building age, use, and other relevant factors to ensure building owners make the most energy-efficient decisions between photovoltaic versus vegetated roof installation. Our research also demonstrates how positive returns on investment can be realized in the US Pacific Northwest and similar regions through vegetated roofs and photovoltaics provided they are each installed optimally.     

Performance improvement potential of sensor embedded products in environmental supply chains

Environmental supply chain is a desirable alternative to traditional supply chain due to new and stricter environmental regulations by local governments and increasing consumer awareness towards environmental issues. The two most common types of environmental supply chains are reverse supply chains and closed-loop supply chains. In reverse or closed-loop supply chains, collected used products are subjected to one of four recovery options, viz., reuse, recycling, remanufacturing or disposal. Regardless of the chosen recovery option, all products are disassembled up to some level. However, there is a high level of uncertainty associated with the disassembly yield due to non-functional and/or missing components. Sensor embedded products (SEPs) is a viable approach to cope with this uncertainty since they involve sensors which can detect non-functional and/or missing components prior to disassembly. This study presents a quantitative assessment of the impact of SEPs on the various performance measures of a kanban-controlled disassembly line. First, separate design of experiments studies based on Orthogonal Arrays are carried out for conventional products and SEPs. Then, the results of paired t-tests comparing the two cases based on different performance measures are presented.     

Electrocoagulation of palm oil mill effluent as wastewater treatment and hydrogen production using electrode aluminum

Palm oil mill effluent (POME) is highly polluting wastewater generated from the palm oil milling process. Palm oil mill effluent was used as an electrolyte without any additive or pretreatment to perform electrocoagulation (EC) using electricity (direct current) ranging from 2 to 4 volts in the presence of aluminum electrodes with a reactor volume of 20 L. The production of hydrogen gas, removal of chemical oxygen demand (COD), and turbidity as a result of electrocoagulation of POME were determined. The results show that EC can reduce the COD and turbidity of POME by 57 and 62%, respectively, in addition to the 42% hydrogen production. Hydrogen production was also helpful to remove the lighter suspended solids toward the surface. The production of Al(OH)XHO at the aluminum electrode (anode) was responsible for the flocculation-coagulation process of suspended solids followed by sedimentation under gravity. The production of hydrogen gas from POME during EC was also compared with hydrogen gas production by electrolysis of tap water at pH 4 and tap water without pH adjustment under the same conditions. The main advantage of this study is to produce hydrogen gas while treating POME with EC to reduce COD and turbidity effectively.     

Re-use of remediated soils for the bioremediation of waste oil sludge

We investigated the possibility of re-using remediated soils for new bioremediation projects by spiking these soils with waste oil sludge in laboratory based microcosms. The level of Total Petroleum Hydrocarbon (TPH) reduction was high (>80%) in naturally attenuated microcosms and was not significantly improved by biostimulation, bioaugmentation and the combined treatment of bioaugmentation and biostimulation by week 12. This indicated that the observed TPH reduction might have been related to the soil's inherent hydrocarbon-degrading potential. Microbial community analysis (16S rDNA and ITS-based Denaturing Gradient Gel Electrophoresis fingerprints) confirmed the dominance of hydrocarbon degrading genera such as Alcanivorax and Scedosporium. Cluster and Shannon diversity analysis revealed similar but stable bacterial and fungal communities in naturally attenuated and amended microcosms indicating that rapid reduction in TPH may not always be accompanied by changes in soil microbial communities. This study has therefore shown that soils previously used for bioremediation can have an improved hydrocarbon degrading potential which was successfully re-harnessed for new projects. This ability to re-harness this potential is attractive because it substantially reduces operational costs as no additional bioremediation treatments are needed. It can also extend a landfill's lifespan as soils can be re-used again before landfill disposal.     

Runoff water quality during drought in a zero-order georgia piedmont pasture: nitrogen and total organic carbon

Approximately 11% of the Southern Piedmont (1.8 million ha) is used for pasture and hay production, mostly under low-input management. Few studies have investigated in the region long-term nitrogen and carbon losses in surface runoff, which can be significant. We present 1999 to 2009 hydrologic and water quality data from a rotationally grazed, 7.8-ha, zero-order pasture (W1) near Watkinsville in the Georgia Piedmont. Annual rainfall was 176 to 463 mm below the long-term average (1240 mm) in 7 of the 11 yr. There were 20 runoff events during 86 mo of below-average rainfall (deficit period), compared with 54 events during 46 mo of nondeficit period. Mean event flow-weighted concentration (in mg L) was 0.96 for nitrate-nitrogen (NO-N), 0.97 for ammonium-nitrogen (NH-N), 3.70 for total nitrogen (TN), and 9.12 for total organic carbon (TOC) ( = 43-47; limited due to instrument problem). Nutrient loads (in kg ha per event) averaged 0.04 for NO-N, 0.03 for NH-N, 0.19 for TN, and 0.54 for TOC. Total loads for N and TOC were 6 to 11 times greater from nondeficit than from deficit periods. The observed N concentrations, while well below maximum drinking water standard limits, could pose risk for eutrophication, which can be stimulated at lower concentrations. However, the ability of headwater streams, such as the one downstream of W1, to reduce nutrient concentrations might partially alleviate this concern. The results of this study point to the need to use a long-term dataset that includes measurements made in drought and wet years when evaluating the efficacy of water quality standards.     

A spatial model approach for assessing windbreak growth and carbon stocks

Agroforestry, the deliberate integration of trees into agricultural operations, sequesters carbon (C) while providing valuable services on agricultural lands. However, methods to quantify present and projected C stocks in these open-grown woody systems are limited. As an initial step to address C accounting in agroforestry systems, a spatial Markov random field model for predicting the natural logarithm (log) of the mean aboveground volume of green ash ( Marsh.) within a shelterbelt, referred to as the log of aboveground volume, was developed using data from an earlier study and web-available soil and climate information. Windbreak characteristics, site, and climate variables were used to model the large-scale trend of the log of aboveground volume. The residuals from this initial model were correlated among sites up to 24 km from a point of interest. Therefore, a spatial dependence parameter was used to incorporate information from sites within 24 km into the prediction of the log of the aboveground volume. Age is an important windbreak characteristic in the model. Thus, the log of aboveground volume can be predicted for a given windbreak age and for values of other explanatory variables associated with a site of interest. Such predictions can be exponentiated to obtain predictions of aboveground volume for windbreaks without repeated inventory. With the capability of quantifying uncertainty, the model has the potential for large regional planning efforts and C stock assessments for many deciduous tree species used in windbreaks and riparian buffers once it is calibrated.     

Effect of surface incorporation of broiler litter applied to no-till cotton on runoff quality

Surface application of broiler litter to no-till cotton could lead to degradation of water quality. Incorporation of broiler litter into the top surface soil (0.05 m) could alleviate this risk. A 2-yr field study was conducted on a silt loam upland soil to determine the effect of incorporation of broiler litter into the soil surface on nutrient and bacterial transport in runoff. The experimental design was a randomized complete block with four treatments and three replications. Treatments were (i) unfertilized control; (ii) surface-appliedbroiler litter at 7.8 Mg ha(-1) without incorporation; (iii) surface-applied broiler litter at 7.8 Mg ha(-1) with immediate incorporation; and (iv) inorganic fertilizer N (urea ammonium nitrate, 32% N) and inorganic fertilizer P (triple superphosphate) at the recommended rate. Phosphorus was surface appliedat 25 kg ha(-1) and N was injected at 101 kg ha(-1) into the soil using a commercial liquid fertilizer applicator. Runoff was collected from small runoff plots (2.4 m by 1.6 m) established at the bottom side of main plots (13.7 m by 6.0 m). Incorporation of broiler litter reduced total N (TN), NO3-N, water soluble P (WSP), and total P (TP) concentrations in runoffby 35, 25, 61, and 64%, respectively, and litter-associated bacteria by two to three orders of magnitude compared with unincorporated treatment. No significant difference in total suspended solids (TSS) in runoffwas obtained between incorporated and unincorporated treatments. Incorporation of broiler litter into the surface soil in the no-till system immediately after application minimized the potential risk for surface nutrient losses and bacteria transport in runoff.     

Meeting Heterogeneity in Consumer Demand for Animal Welfare: A Reflection on Existing Knowledge and Implications for the Meat Sector

The legitimacy of the dominant intensive meat production system with respect to the issue of animal welfare is increasingly being questioned by stakeholders across the meat supply chain. The current meat supply is highly undifferentiated, catering only for the extremes of morality concerns (i.e., conventional vs. organic meat products). However, a latent need for compromise products has been identified. That is, consumer differences exist regarding the trade-offs they make between different aspects associated with meat consumption. The heterogeneity in consumer demand could function as a starting point for market segmentation, targeting and positioning regarding animal welfare concepts that are differentiated in terms of animal welfare and price levels. Despite this, stakeholders in the meat supply chain seem to be trapped in the dominant business model focused on low cost prices. This paper aims to identify conflicting interests that stakeholders in the meat supply chain experience in order to increase understanding of why heterogeneous consumer preferences are not met by a more differentiated supply of meat products produced at different levels of animal welfare standards. In addition, characteristics of the supply chain that contribute to the existence of high exit barriers and difficulty to shift to more animal-friendly production systems are identified. Following the analysis of conflicting interests among stakeholders and factors that contribute to difficulty to transform the existing dominant regime, different routes are discussed that may help and motivate stakeholders to overcome these barriers and stimulate the creation of new markets.     

The Spanish building crisis and its effect in the gypsum quarry production (1998–2012)

Gypsum is one of the most important mined mineral commodities of the world. As an industrial rock, it is primarily used by the construction industry. Therefore, the economics of the gypsum market can be correlated with parameters that have controlled the origin and development of the Spanish building bubble between years 1998 and 2006. The burst of this building bubble has been interpreted as the main triggering factor for Spain's current crisis.