Active moss biomonitoring of small-scale spatial distribution of airborne major and trace elements in the Belgrade urban area

In urban environments, human exposure to air pollutants is expected to be significantly increased, especially near busy traffic streets, street canyons, tunnels, etc. where urban topography and microclimate may additionally cause poor air conditions giving rise to pollution hotspots. As a practical and cost-effective approach, active moss biomonitoring survey of some major and trace element air pollution was performed in the Belgrade street canyons and city tunnel in 2011 with the aim to evaluate possibility of using Sphagnum girgensohnii moss bags for investigation of the small-scale vertical and horizontal distribution patterns of the elements. In five street canyons, the moss bags were hung at heights of about 4, 8 and 16 m, during 10 weeks, and also, for the same time, the moss bags were exposed in the tunnel, in front of and out of it. After the exposure period, the concentrations of Al, Ba, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, Sr, V and Zn in the moss were determined by inductively coupled plasma optical emission spectrometry. According to the results, in all street canyons, the vertical distribution patterns of the moss elements concentration (Al, Ba, Co, Cr, Cu, Ni, Pb, Sr, V and Zn) showed statistically significant decrease from the first to the third heights of bags exposure. In the tunnel experiment, from inner to out of the tunnel, for Al, Ba, Cd, Co, Cr, Cu, Fe, K and Zn, decreasing trend of concentrations was obtained. Significantly higher concentration of the elements was pronounced for the tunnel in comparison with the street canyons. The results indicate that the use of S. girgensohnii moss bags is a simple, sensitive and inexpensive way to monitor the small-scale inner city spatial distribution of airborne major and trace element content.     

Persistence of seven pesticides as influenced by soil moisture1

Abstract

Pesticides are often applied in combination, but less‐often is soil persistence measured this way. The present field and laboratory study determined relative persistence of five herbicides and two insecticides, co‐applied, as a function of three soil water contents. Losses were modeled adequately by first‐order dissipation, with no significant improvement by using a two‐compartment model. The order of persistence in a silt loam, at 25% moisture, was carbofuran < cyanazine < metribuzin = alachlor < atrazine < ethoprop < metolachlor (t_½ ranged from 7–91 days). Carbofuran degradation increased greatly from 12–25% soil moisture; atrazine was unaffected by 12–35%, whereas the remaining compounds showed limited increasing loss in wetter soil. Field‐based persistence was more variable, but generally similar to lab rankings.     

Aporrectodea caliginosa, a suitable earthworm species for field based genotoxicity assessment?

There is a growing interest for the application of biomakers to field-collected earthworms. Therefore we have evaluated the usability of native populations of endogeic, widely distributed earthworm Aporrectodea caliginosa in the assessment of soil genotoxicity using the Comet assay. Validation of the Comet assay on earthworm coelomocytes has been established using commercially available Eisenia fetida exposed to copper, cadmium, and pentachlorophenol, along with A. caliginosa exposed to copper in a filter paper contact test. Neutral red retention time (NRRT) assay was conducted on copper exposed and field-collected earthworms. Significant DNA and lysosomal damage was measured using Comet and NRRT assays in native populations of A. caliginosa sampled from the polluted soils in the urban area in comparison to the earthworms from the reference site. The results of this study confirm the employment of A. caliginosa as a suitable species for the in situ soil toxicity and genotoxicity field surveys.     

Mycobiota and mycotoxins in bee pollen collected from different areas of Slovakia

Contamination by microscopic fungi and mycotoxins in different bee pollen samples, which were stored under three different ways of storing as freezing, drying and UV radiation, was investigated. During spring 2009, 45 samples of bee-collected pollen were gathered from beekeepers who placed their bee colonies on monocultures of sunflower, rape and poppy fields within their flying distance. Bee pollen was collected from bees' legs by special devices placed at the entrance to hives. Samples were examined for the concentration and identification of microscopic fungi able to grow on Malt and Czapek-Dox agar and mycotoxins content [deoxynivalenol (DON), T-2 toxin (T-2), zearalenone (ZON) and total aflatoxins (AFL), fumonisins (FUM), ochratoxins (OTA)] by direct competitive enzyme-linked immunosorbent assays (ELISA). The total number of microscopic fungi in this study ranged from 2.98 ± 0.02 in frozen sunflower bee pollen to 4.06 ± 0.10 log cfu.g(-1) in sunflower bee pollen after UV radiation. In this study, 449 isolates belonging to 21 fungal species representing 9 genera were found in 45 samples of bee pollen. The total isolates were detected in frozen poppy pollen 29, rape pollen 40, sunflower pollen 80, in dried poppy pollen 12, rape pollen 36, sunflower 78, in poppy pollen after UV radiation treatment 54, rape 59 and sunflower 58. The most frequent isolates of microscopic fungi found in bee pollen samples of all prevalent species were Mucor mucedo (49 isolates), Alternaria alternata (40 isolates), Mucor hiemalis (40 isolates), Aspergillus fumigatus (33 isolates) and Cladosporium cladosporioides (31 isolates). The most frequently found isolates were detected in sunflower bee pollen frozen (80 isolates) and the lowest number of isolates was observed in poppy bee pollen dried (12 isolates). The most prevalent mycotoxin of poppy bee pollen was ZON (361.55 ± 0.26 μg.kg(-1)), in rape bee pollen T-2 toxin (265.40 ± 0.18 μg.kg(-1)) and in sunflower bee pollen T-2 toxin (364.72 ± 0.13 μg.kg(-1)) in all cases in frozen samples.     

Flood management: prediction of microbial contamination in large-scale floods in urban environments

With a changing climate and increased urbanisation, the occurrence and the impact of flooding is expected to increase significantly. Floods can bring pathogens into homes and cause lingering damp and microbial growth in buildings, with the level of growth and persistence dependent on the volume and chemical and biological content of the flood water, the properties of the contaminating microbes, and the surrounding environmental conditions, including the restoration time and methods, the heat and moisture transport properties of the envelope design, and the ability of the construction material to sustain the microbial growth. The public health risk will depend on the interaction of these complex processes and the vulnerability and susceptibility of occupants in the affected areas. After the 2007 floods in the UK, the Pitt review noted that there is lack of relevant scientific evidence and consistency with regard to the management and treatment of flooded homes, which not only put the local population at risk but also caused unnecessary delays in the restoration effort. Understanding the drying behaviour of flooded buildings in the UK building stock under different scenarios, and the ability of microbial contaminants to grow, persist, and produce toxins within these buildings can help inform recovery efforts. To contribute to future flood management, this paper proposes the use of building simulations and biological models to predict the risk of microbial contamination in typical UK buildings. We review the state of the art with regard to biological contamination following flooding, relevant building simulation, simulation-linked microbial modelling, and current practical considerations in flood remediation. Using the city of London as an example, a methodology is proposed that uses GIS as a platform to integrate drying models and microbial risk models with the local building stock and flood models. The integrated tool will help local governments, health authorities, insurance companies and residents to better understand, prepare for and manage a large-scale flood in urban environments.     

How Socio-Economic Conditions Influence Forest Policy Development in Central and South-East Europe

In this article, several findings on socio-economic conditions derived from national reports and a web-based questionnaire are discussed and related to the changing role of forestry and the future forest policy development. A number of Central and South-eastern European countries taking part in a SEE-ERA-NET project ReForMan project (www.reforman.de) participated in data acquisition: Austria, Bosnia and Herzegovina, Croatia, Germany, Serbia and Slovenia. The aim of the research was to illustrate the present structure of forestry sector, as well as investigate newly emerging topics in forestry of Central and South-eastern Europe. The results indicated certain patterns in attitudes and perceptions among stakeholders that can be related to socio-economic conditions defined for each country. Clear differences between member and non-member countries exist only in level of implementation of EU legislation. Results showed consensus on main threats to the forests among all countries, but also some country specifics in perceptions of factors influencing forestry, their importance and professional competencies. These results could be additionally explained by influence of historical conditions which shaped development of forest sector in SEE region especially in its organizational dimension as well as in perceived role of forestry expressed through recognition of main forest functions. The influence of European forest policy processes in the region is evident through adaptation of EU legislation and perceived implications of international processes on national levels. Based on this observation, two possible options for future development of the forestry sector can be foreseen: (i) focusing on the productive function of forests and fostering its' sustainable use; or (ii) putting an emphasis on environmental and social issues. In both cases supporting public participation in decision-making processes is recommendable. Another conclusion based on perceived medium to low professional competencies to cope with new topics, that there is lack of confidence and need for professional support in decisionmaking processes.     

Polycyclic aromatic hydrocarbons in air on small spatial and temporal scales – I. Levels and variabilities

Polycyclic aromatic hydrocarbons (PAHs) were measured together with inorganic air pollutants at two urban sites and one rural background site in the Banja Luka area, Bosnia and Hercegovina, during 72 h in July 2008 using a high time resolution (5 samples per day) with the aim to study the spatial and temporal variabilities and to explore the significance of averaging effects inherent to 24 h-sampling. Measurement uncertainty was quantified on basis of three independent side-by-side samplers, deployed at one of the sites.PAH abundances in the urban and rural environments differed largely. Levels at the urban sites exceeded the levels at the rural site by >100%. The discrepancy was largely dominated by emission of 3–4 ring PAHs in the city, while 5–6 ring PAHs were more evenly distributed between city sites and the hill site. During the night a higher fraction of the semivolatile PAHs might have been stored in the soil or sorbed to surfaces. PAH patterns were undistinguishable across the three sites. However, concentrations of more particle-associated substances differed significantly between the urban sites than between one of the urban sites and the rural site (3σ uncertainty). Time-averaging (on a 24 h-basis) would have masked the significant inter-site differences of half of the substances which were found at different levels (on a 4 h-basis).     

Water-soluble main ions in precipitation over the southeastern Adriatic region: chemical composition and long-range transport

Background, aim and scope  

Precipitation samples collected from 1995 to 2000 at meteorological station in the eastern outskirts of Herceg Novi (Montenegro) were analysed on Na⁺, K⁺, Mg²⁺, Ca²⁺, Cl^–, SO₄ ^2–, NO₃ ^– and NH₄ ⁺. Four-day backward trajectory simulations were conducted during the precipitation period to investigate the regional transport of main ions and their deposition in the region of the southeastern Adriatic Sea. The air mass trajectories were classified into six trajectory categories by the origin and direction of their approach to Herceg Novi.     

Assessment of Cr and Ni phytotoxicity from cutlery-washing waste-waters using biomass and chlorophyll production tests on mustard <Emphasis Type="Italic">Sinapis alba</Emphasis> L. seedlings

Background, aim, and scope  

The aim of this work was to determine phytotoxicity of washing waste-waters from a cutlery production line with high content of Cr and Ni. These waters were previously classified, without verification, as dangerous and it is now necessary to question the justice of the present classification under the new legislation for waste management (Waste Law No. 223/2001) in the Slovak Republic.     

Levels of PAHs in the soils of Belgrade and its environs

Polycyclic aromatic hydrocarbons (PAHs) were analysed in 39 soil samples (0–10 cm upper layer) collected in Belgrade, the capital of Serbia. The sampling sites were randomly selected from urban, urban/recreational and rural areas; the samples were collected in April and December 2003 and July and October 2004. The sum of the 16 PAHs corresponding to the recreational zone (298 μg/kg) was close to the urban zone (375 μg/kg). Mean soil ΣPAH concentration from rural areas was 18 μg/kg dry weight. Comparing to values observed in the urbanized locations around the world, the overall levels of PAHs in this study are low. The PAH ratios obtained pointed to a domination of pyrogenically formed PAHs in the examined soils. The dominant PAHs in soil samples in urban zones were fluoranthene, benz[a]anthracene, phenanthrene and pyrene, mostly emitted from noncatalyst vehicles which are still in use in Serbia. The total carcinogenic potency for each sampling site was calculated. Regardless of the used carcinogenic activity factors, carcinogenic potency of 7 sites were 3–9 times higher than the reference ones indicating the increased carcinogenic burden of soils from these sites.