Enrichment and isolation of endosulfan-degrading microorganisms

Endosulfan (6,7,8,9,10,10-hexachloro-1,5,5a,6,9,9a-hexahydro-6,9-methano-2,3,4-benzo-dioxathiepin-3-oxide) is a cyclodiene organochlorine currently used as an insecticide all over the world and its residues are posing a serious environmental threat. This study reports the isolation and identification of enriched microorganisms, capable of degrading endosulfan. Enrichment was achieved by using the insecticide as either the sole source of carbon or sulfur in parallel studies. Two strains each of fungi (F1 and F4) and bacteria (BF2 and B4) were selected using endosulfan as a sole carbon source. A Pandoraea species (Lin-3) previously isolated in our laboratory using lindane (gamma-HCH) as a carbon source was also screened for endosulfan degradation. F1 and F4 (Fusarium ventricosum) degraded alpha-endosulfan by as much as 82.2 and 91.1% and beta-endosulfan by 78.5 and 89.9%, respectively, within 15 d of incubation. Bacterial strains B4 and Lin-3 degraded alpha-endosulfan up to 79.6 and 81.8% and beta-endosulfan up to 83.9 and 86.8%, respectively, in 15 d. Among the bacterial strains isolated by providing endosulfan as a sulfur source, B4s and F4t degraded alpha-endosulfan by as much as 70.4 and 68.5% and beta-endosulfan by 70.4 and 70.8%, respectively, after 15 d. Degradation of the insecticide occurred concomitant with bacterial growth reaching an optical density (OD600) of 0.366 and 0.322 for B4 and Lin-3, respectively. High OD600 was also noted with the other bacterial strains utilizing endosulfan as a sulfur source. Fungal and bacterial strains significantly decreased the pH of the nutrient culture media while growing on endosulfan. The results of this study suggest that these novel strains are a valuable source of potent endosulfan-degrading enzymes for use in enzymatic bioremediation.     

Assessment of municipal solid waste generation and recyclable materials potential in Kuala Lumpur,Malaysia

This paper presents a forecasting study of municipal solid waste generation (MSWG) rate and potential of its recyclable components in Kuala Lumpur (KL), the capital city of Malaysia. The generation rates and composition of solid wastes of various classes such as street cleansing, landscape and garden, industrial and constructional, institutional, residential and commercial are analyzed. The past and present trends are studied and extrapolated for the coming years using Microsoft office 2003 Excel spreadsheet assuming a linear behavior. The study shows that increased solid waste generation of KL is alarming. For instance, the amount of daily residential SWG is found to be about 1.62 kg/capita; with the national average at 0.8–0.9 kg/capita and is expected to be increasing linearly, reaching to 2.23 kg/capita by 2024. This figure seems reasonable for an urban developing area like KL city. It is also found that, food (organic) waste is the major recyclable component followed by mix paper and mix plastics. Along with estimated population growth and their business activities, it has been observed that the city is still lacking in terms of efficient waste treatment technology, sufficient fund, public awareness, maintaining the established norms of industrial waste treatment etc. Hence it is recommended that the concerned authority (DBKL) shall view this issue seriously.     

Efficient DDT and trichlorophenol detoxification using NaBH4 and Devarda alloy

DDT—1,1,1-trichloro-2,2-bis(4-chlorophenyl)ethane—is a pesticide that has been widely used to control insects in agriculture. TCP—2,4,6-trichlorophenol—has been used in pesticide formulations as a preservative, disinfectant and antiseptic. Detoxification of DDT and TCP is very difficult due to their stable chemical structure. Here, a mixture of NaBH₄ and Devarda alloy was applied for the first time to detoxify DDT and TCP. Results show 94 % dechlorination of DDT at 100 °C and 97 % dechlorination of TCP at 80 °C. The presence of diphenyl ethane suggests the complete dechlorination of DDT. The formation of benzene suggests a strong reduction. The method is efficient, cost-effective and may be applied at the industrial-level.     

A New Approach to Plant Diversity Assessment Combining HPLC Data, Simplex Mixture Design and Discriminant Analysis

The quantitative assessment of plant diversity and its monitoring with time represent a key environmental issue for management and conservation of natural resources. Assessment of plant diversity could be based on chemical analyses of secondary metabolites (e.g. flavonoids, terpenoids), because of the substantial quantitative and qualitative between-individual variability in such compounds. At a geographical scale, the plant populations become widely dispersed, and their monitoring from numerous routine individual analyses could become restricting. To overcome such constraint, this study develops a multivariate calibration model giving the relative frequency of a particular taxon from a simple high-performance liquid chromatography (HPLC) analysis of a plant mixture. The model was built from a complete set of mixtures combining different taxons, according to an experimental design (Scheffé’s matrix). For each mixture, a reference HPLC pattern was simulated by averaging the individual HPLC profiles of the constitutive taxons. The calibration models, based on Bayesian discriminant analysis (BDA), gave statistical relationships between the contributions of each taxon in mixtures and reference HPLC patterns of these mixtures. Finally, these models were validated on new mixtures by using outside plants. This new biodiversity survey approach is illustrated on four chemical taxons (four chemotypes) of Astragalus caprinus (Fabaceae). The more differentiated the taxon, the better predicted its contributions (in mixtures) were by BDA calibration model. This new approach could be very useful for a global routine survey of plant diversity.     

Bioenergy to save the world

BACKGROUND AND AIM: Following to the 2006 climate summit, the European Union formally set the goal of limiting global warming to 2 degrees Celsius. But even today, climate change is already affecting people and ecosystems. Examples are melting glaciers and polar ice, reports about thawing permafrost areas, dying coral reefs, rising sea levels, changing ecosystems and fatal heat periods. Within the last 150 years, CO2 levels rose from 280 ppm to currently over 400 ppm. If we continue on our present course, CO2 equivalent levels could approach 600 ppm by 2035. However, if CO2 levels are not stabilized at the 450-550 ppm level, the consequences could be quite severe. Hence, if we do not act now, the opportunity to stabilise at even 550 ppm is likely to slip away. Long-term stabilisation will require that CO2 emissions ultimately be reduced to more than 80% below current levels. This will require major changes in how we operate. RESULTS: Reducing greenhouse gases from burning fossil fuels seems to be the most promising approach to counterbalance the dramatic climate changes we would face in the near future. It is clear since the Kyoto protocol that the availability of fossil carbon resources will not match our future requirements. Furthermore, the distribution of fossil carbon sources around the globe makes them an even less reliable source in the future. We propose to screen crop and non-crop species for high biomass production and good survival on marginal soils as well as to produce mutants from the same species by chemical mutagenesis or related methods. These plants, when grown in adequate crop rotation, will provide local farming communities with biomass for the fermentation in decentralized biogas reactors, and the resulting nitrogen rich manure can be distributed on the fields to improve the soil. DISCUSSION: Such an approach will open new economic perspectives to small farmers, and provide a clever way to self sufficient and sustainable rural development. Together with the present economic reality, where energy and raw material prices have drastically increased over the last decade, they necessitate the development and the establishment of alternative concepts. CONCLUSIONS: Biotechnology is available to apply fast breeding to promising energy plant species. It is important that our valuable arable land is preserved for agriculture. The opportunity to switch from low-income agriculture to biogas production may convince small farmers to adhere to their business and by that preserve the identity of rural communities. PERSPECTIVES: Overall, biogas is a promising alternative for the future, because its resource base is widely available, and single farms or small local cooperatives might start biogas plant operation.     

An experimental investigation into micro ball end-milling of silicon

Silicon is a representative operational material for semiconductor and micro-electronics. In certain MEMS applications, it is required to fabricate three dimensional channels and complex pattern on silicon substrate. Such features are typically fabricated by photolithography and chemical etching. These processes have low productivity and have certain other limitations. Therefore, a viable switch-over from non-traditional fabrication processes to traditional machining is highly desired for improved productivity in high-mix low-volume production. However, machining of silicon by traditional process is extremely difficult due to its high brittleness. Even very small forces produced during machining can cause brittle fracture on silicon surface resulting in deteriorated surface quality. The fundamental principle in machining of a brittle material such as silicon is to achieve material removal through plastic deformation rather than crack propagation. This paper presents the experimental results of ductile-mode machining of silicon by micro ball end-milling. The workpiece surface was inclined to the rotational axes of the cutter to improve the surface finish. It was established experimentally that 15-μm deep, fracture-free slots can be machined on silicon wafer by micro ball end-milling if the feed rate is below a certain threshold. The influence of several machining parameters on the roughness of machined-surface was also investigated. Cubic boron nitride (CBN) is presented as much economical alternative tool-material to single-crystal diamond for machining silicon in ductile-mode.     

Measurement of soil radioactivity levels and radiation hazard assessment in southern Rechna interfluvial region, Pakistan

Rechna interfluvial region is one of the main regions of Punjab, Pakistan. It is the area which is lying between River Ravi and River Chenab, alluvial-filled. Radioactivity levels in soil samples, collected from southern Rechna interfluvial region, Pakistan, have been estimated by using gamma-ray spectrometric technique. ²²⁶Ra, ²³²Th, the primordial radionuclide ⁴⁰K, and the artificial radionuclide ¹³⁷Cs have been measured in the soil of the study area. The mean radioactivity levels of ²²⁶Ra, ²³²Th, ⁴⁰K, and ¹³⁷Cs were found to be 50.6 ± 1.7, 62.3 ± 3.2, 662.2 ± 32.1, and 3.1 ± 0.3 Bq kg^???1, respectively. The mean radium equivalent activity (Ra_eq), outdoor radiation hazard index (H _out), indoor radiation hazard index (H _in), and terrestrial absorbed dose rate for the area under study were determined as 190.8 ± 8.7 Bq kg^???1, 0.52, 0.65, and 69.8 nGy h^???1, respectively. The annual effective dose to the general public was found to be 0.43 mSv. This value lies well below the limit of 1 mSv for general public as recommended by the International Commission on Radiological Protection. The measured values are comparable with other global radioactivity measurements and are found to be safe for the public and the environment.     

Molecular characterization of conjugative plasmids in pesticide tolerant and multi-resistant bacterial isolates from contaminated alluvial soil

A total of 35 bacteria from contaminated soil (cultivated fields) near pesticide industry from Chinhat, Lucknow, (India) were isolated and tested for their tolerance/resistance to pesticides, heavy metals and antibiotics. Bacterial isolates were identified by 16S rDNA sequencing. Gas Chromatography analysis of the soil samples revealed the presence of lindane at a concentration of 547 ng g⁻¹ and α-endosulfan and β-endosulfan of 422 ng g⁻¹ and 421 ng g⁻¹ respectively. Atomic Absorption Spectrophotometry analysis of the test sample was done and Cr, Zn, Ni, Fe, Cu and Cd were detected at concentrations of 36.2, 42.5, 43.2, 241, 13.3 and 11.20 mg kg⁻¹ respectively. Minimum inhibitory concentrations of all the isolates were determined for pesticides and heavy metals. All the multi-resistant/tolerant bacterial isolates were also tested for the presence of incompatibility (Inc) group IncP, IncN, IncW, IncQ plasmids and for rolling circle plasmids of the pMV158-family by PCR. Total community DNA was extracted from pesticide contaminated soil. PCR amplification of the bacterial isolates and soil DNA revealed the presence of IncP-specific sequences (trfA2 and oriT) which was confirmed by dot blot hybridization with RP4-derived DIG-labelled probes. Plasmids belonging to IncN, IncW and IncQ group were neither detected in the bacterial isolates nor in total soil DNA. The presence of conjugative or mobilizable IncP plasmids in the isolates indicate that these bacteria have gene transfer capacity with implications for dissemination of heavy metal and antibiotic resistance genes. We propose that IncP plasmids are mainly responsible for the spread of multi-resistant bacteria in the contaminated soils.     

Development of geomorphologic instantaneous unit hydrograph for a large watershed

Hill torrents cause a lot of environmental and property damage in Pakistan every year. Proper assessment of direct runoff in the form of hill torrents is essential for protection of environment, property, and human life. In this paper, direct surface runoff hydrograph (DSRH) was derived for a large catchment using the geomorphologic instantaneous unit hydrograph concept. The catchment with hill torrent flows in semi-arid region of Pakistan was selected for this study. It was divided into series of linear cascades and hydrologic parameters required for Nash's conceptual model, and were estimated using geomorphology of the basin. Geomorphologic parameters were derived from satellite images of the basin and ERDAS and ArcGIS were used for data processing. Computer program was developed to systematically estimate the dynamic velocity, its related parameters by optimization and thereby to simulate the DSRH. The data regarding rainfall-runoff and satellite images were collected from Punjab Irrigation and Power Department, Pakistan. Model calibration and validation was made for 15 rainfall-runoff events. Ten events were used for calibration and five for validation. Model efficiency was found to be more than 90% and root mean square error to be about 5%. Impact of variation in model parameters (shape parameter and storage coefficient) on DSRH was investigated. For shape parameter, the number of linear cascades varied from 1 to 3 and it was found that the shaper parameter value of 3 produced the best DSRH. Various values of storage coefficient were used and it was observed that the value determined from geomorphology and the dynamic velocity produced the best results.