ERD of Residual TCE DNAPL Achieving Nondetect from a Single Injection of Food‐Grade Waste

Residual dense nonaqueous phase liquid (DNAPL) composed of trichloroethene (TCE) was identified in a deeper interval of an overburden groundwater system at a manufacturing facility located in northern New England. Site hydrostratigraphy is characterized by two laterally continuous and transmissive zones consisting of fully‐saturated fine sand with silt and clay. The primary DNAPL source was identified as a former dry well with secondary contributions from a proximal aboveground TCE storage tank. A single additive‐injection mobilization in 2001 utilizing a food‐grade injectate formulated with waste dairy product and inactive yeast enhanced residual TCE DNAPL destruction in situ by stimulating biotic reductive dechlorination. The baseline TCE concentration was detected up to 97,400 μg/L in the deeper interval of the overburden groundwater system, and enhanced reductive dechlorination (ERD) achieved >99 percent reduction in TCE concentrations in groundwater over nine years with no evidence of sustained rebound. TCE concentrations have remained nondetect below 2.0 μg/L for the last five consecutive sampling rounds between 2013 and 2015. ERD utilizing a food‐grade injectate is a green remediation technology that has destroyed residual DNAPL at the site and achieved similar results at other residual DNAPL sites during both pilot‐ and full‐scale applications. ©2016 Wiley Periodicals, Inc.     

Biodegradable Blends with Potential Use in Packaging: A Comparison of PLA/Chitosan and PLA/Cellulose Acetate Films

Poly(lactic acid) (PLA) is a biodegradable polymer that exhibits high elastic modulus, high mechanical strength, and feasible processability. However, high cost and fragility hinder the application of PLA in food packaging. Therefore, this study aimed to develop flexible PLA/acetate and PLA/chitosan films with improved thermal and mechanical properties without the addition of a plasticizer and additive to yield extruder compositions with melt temperatures above those of acetate and chitosan. PLA blends with 10, 20, and 30 wt% of chitosan or cellulose acetate were processed in a twin-screw extruder, and grain pellets were then pressed to form films. PLA/acetate films showed an increase of 30 °C in initial degradation temperature and an increase of 3.9 % in elongation at break. On the other hand, PLA/chitosan films showed improvements in mechanical properties as an increase of 4.7 % in elongation at break. PLA/chitosan film which presented the greatest increase in elongation at break proved to be the best candidate for application in packaging.     

Physical and Chemical Connectivity of Streams and Riparian Wetlands to Downstream Waters: A Synthesis

Streams, riparian areas, floodplains, alluvial aquifers, and downstream waters (e.g., large rivers, lakes, and oceans) are interconnected by longitudinal, lateral, and vertical fluxes of water, other materials, and energy. Collectively, these interconnected waters are called fluvial hydrosystems. Physical and chemical connectivity within fluvial hydrosystems is created by the transport of nonliving materials (e.g., water, sediment, nutrients, and contaminants) which either do or do not chemically change (chemical and physical connections, respectively). A substantial body of evidence unequivocally demonstrates physical and chemical connectivity between streams and riparian wetlands and downstream waters. Streams and riparian wetlands are structurally connected to downstream waters through the network of continuous channels and floodplain form that make these systems physically contiguous, and the very existence of these structures provides strong geomorphologic evidence for connectivity. Functional connections between streams and riparian wetlands and their downstream waters vary geographically and over time, based on proximity, relative size, environmental setting, material disparity, and intervening units. Because of the complexity and dynamic nature of connections among fluvial hydrosystem units, a complete accounting of the physical and chemical connections and their consequences to downstream waters should aggregate over multiple years to decades.     

Arsenic and sulfur nanoparticle synthesis mimicking environmental conditions of submarine shallow-water hydrothermal vents

Arsenic and sulfur mineralization is a natural phenomenon occurring in hydrothermal systems where parameters like temperature and organic matter(OM) can influence the mobilization of the toxic metalloid in marine environments. In the present study we analyze the influence of temperature and OM(particularly sulfur-containing additives) on As and S precipitation based on the recent discovery of As-rich nanoparticles in the hydrothermal system near the coast of the Greek island Milos. To this end, ...     

Oxidative treatment of simulated dyehouse effluent by uv and near-UV light assisted Fenton's reagent

UV/Fenton, near-UV-visible/Fenton, dark Fenton, and H₂O₂/UV reactions have been used to treat simulated dyehouse effluents representing wastewater from the textile dyeing and rinsing process. Experiments were carried out in a lab - scale photochemical reactor using concentrations of 0.5–25 mM H₂O₂, 0.04-0.5 mM Fe²⁺-ion and different dilutions of textile wastewater. To assess the extent of mineralization, decolourization kinetics and the effect of different fight sources on treatment efficiency, DOC, optical density at 254 nm and 600 nm wavelength and residual H₂O₂ concentrations were measured during the course of the advanced oxidation reactions. Comparative evaluation of the obtained results revealed that the decolourization rate increased with applied H₂O₂ and Fe²⁺-ion dose as well as the strength of the synthetic textile wastewater. The best results were obtained by the near - UV/visible/Fenton process with a decolourization rate constant of 1.57 min⁻¹, a UV_254nm reduction of 97% and a DOC removal of 41% at relatively low doses of the H₂O₂ oxidant and Fe²⁺-ion catalyst within 60 min treatment time.     

ROLE OF EROSION PROCESSES IN TRANSFER OF RADIONUCLIDES: RESULTS OF FIELD EXPERIMENTS1

ABSTRACT: An experimental one-year fieldwork has been conducted in the vicinity of the Chernobyl NPP, within an agricultural watershed, to study the transfer of radionuclides brought into the environment by the disaster of 1986. Presented are results of observation of the washout of ¹³⁷Cs from the runoff plot both in natural conditions and under artificial rainfalls. Beside traditional hydro-logical methods, new techniques were used allowing to consider microtopographical peculiarities of the runoff plot and their role in the redistribution of radionuclides. The estimate of the annual mass balance for the soil and the radionuclides within the runoff plot has shown that, regardless of significant areal variation of their concentration, the ¹³⁷Cs washout with the solid runoff resulted from artificial rainfalls amounts to some 1 percent of its reserves in the uppermost 5 cm of the topsoil. The same parameter for the natural runoff is lower by an order of magnitude. Both these factors of self-purification are about two times less than natural radioactive decay of ¹³⁷Cs.     

Microstructure of settlement-marks in the otoliths of tropical reef fishes

The morphology and ultrastructure of the otolith settlement-mark was examined in 44 tropical reef-fish species spanning nine families. A classification scheme based on similar otolith characteristics is presented. Three major categories are identified based on changes in increment width and optical qualities of the settlement-mark. Of the 44 species examined, 39 possessed “abrupt” settlement-marks (Type I) characterised by a rapid decrease in increment width (up to 50% reduction) over settlement. Type I settlement-marks were found in all nine families examined. The 39 species spanned the whole range of possible larval durations (Pomacentrus moluccensis, 15 d ± 0 SE; Naso hexacanthus, 91.2 d ± 2.97 SE). Four of the 44 species possessed “zonal” settlement-marks (Type II), featuring a band of increments that are wider than pre-settlement increments. Species in this category are the labrids Corisaygula, Thalassoma bifasciatum, T. lunare and an unidentified acanthurid (Acanthurus sp. 2). One species of acanthurid (N. brevirostris) possessed a “gradual” settlement-mark (Type III), manifest as a gradual decrease in increment width during the settlement period. A possible fourth type was identified from the literature. Gnatholepis thompsoni and Coryphopterus glaucofraenum possessed a settlement-mark with increment widths that increased post-settlement. Available data suggest a poor relationship between the structure of the settlement-mark and the magnitude of metamorphosis (previously reported as internal and external morphological change). Evidence suggests that the increment profile over early development and the increment transitions associated with the settlement event are taxon-specific and may enable late-larval stage fishes to be identified to species level. Received: 21 May 1997 / Accepted: 3 February 1999     

Heavy Metal Toxicity Responses of Two Willow (Salix) Varieties Grown Hydroponically: Development of a Tolerance Screening Test

The E.U. funded BIORENEW project is investigating bioremediation of industrially degraded land using biomass fuel crops, including willow. One of its goals is to develop a rapid screening test to assess the metal tolerance of large numbers of willow varieties. This should reflect how a plant will respond to heavy metals under various field conditions and in the long term. A preliminary experiment tested two varieties of contrasting ability to thrive in metal-contaminated soils. Trees were exposed to a metal cocktail in three different strengths of background solution. An appropriate strength solution (1/4 strength Hoaglands) was identified for differentiating variety performance, based on its effect on the biomass of plant fractions relative to control fractions. This is a response to heavy metals which can be quantified rapidly and simply. The relative performance of the varieties was comparable to their performance in field studies. This test will be used to assess the tolerance of further varieties.     

Biodegradation kinetics of surfactants in seawater.

In this paper, a general kinetic model for degradation processes of surfactants is proposed. The model equation is v = K2S2 + K1S + K0, where v is the substrate consumption rate in the biodegradation process, S is the surfactant concentration in the medium and K2, K1, and K0 are kinetic constants. From this general expression, different simplified equations can be obtained (where K0 = 0; K2 and K0 = 0; K2 = 0; K2 and K1 = 0), which are representative of the process for different operating conditions. This model was tested by measuring the degradation of two different surfactants (Sodium dodecyl benzene sulfonate, LAS; and Sodium dodecyl sulfate, DSNa) under two different temperatures (5 and 20 degrees C). Values predicted by the model are close to experimental data obtained.