Multiparametric approach for an exemplary study of laser printer emissions

The aim of this work was the study, by a multiparametric approach, of emissions from a laser printer in an experimental box-chamber, with particular attention to nanoparticles release. The experimental design included number concentration measurements by Fast Mobility Particle Sizer (FMPS) and chemical characterizations (elements) of size segregated samples collected by Nanomoudi cascade impactor. Volatile Organic Compounds (VOCs) were also sampled by charcoal sorbent tubes by personal sampling pumps. Monitoring of ozone, total volatile organic compounds concentrations and of temperature and humidity values inside the experimental box during the printing processes were also performed by automatic analyzers. The performed monitoring allowed to evidence different ways for particles emissions by laser printers, in particular showing that nanoparticles, characterised by high concentrations of Ba, Zn, B, K, Sr and Na, are set free at the beginning of the printing process. This emission seems to be directly ascribable to the use of toner powder, as all these elements are present in it. The emission of larger particles (ca. 100-320 nm) was observed in subsequent phases of the print process, probably due to the condensation of vapours released during the progressive heating of the fuser roller. This contribution was proved by both the FMPS measurements and the cascade impactor results. Also, a low emission of particles in higher size ranges was evidenced, mainly due to paper related particles. A very high concentration of VOCs was detected inside the chamber and the chemical speciation shows that the major contribution is associated to toner components, even if some species are released from other printer components. Although the formation of secondary species by reaction of VOCs with ozone cannot be excluded, these species were present inside the chamber at concentrations lower than the detection limit.     

Perfluorinated alkylated substances in vegetables collected in four European countries; occurrence and human exposure estimations

The human diet is recognised as one possible major exposure route to the overall perfluorinated alkylated substances (PFAS) burden of the human population, resulting directly from contamination of dietary food items, as well as migration of PFAS from food packaging or cookware. Most European countries carry out national monitoring programs (food basket studies) to monitor contamination with pollutants. Usually, for PFASs, non-coordinated approaches are used in Europe, since food basket studies are mainly carried out by national authorities following national requirements and questions, making comparisons between different countries difficult. A harmonised sampling campaign collecting similar food items in a uniform procedure enabling direct comparison between different regions in Europe was designed. We selected four countries (Belgium, Czech Republic, Italy and Norway), representing the four regions of Europe: West, East, South and North. In spring 2010 and 2011, 20 different types of vegetables were sampled in Belgium, Czech Republic, Italy and Norway. Perfluorinated carboxylic acids (PFCAs) were the main group of detected PFASs, with perfluorinated octanoic acid (PFOA) as the most abundant PFCA (with exception of samples from Czech Republic), followed by perfluorinated hexanoic acid and perfluorinated nonanoic acid. Dietary intake estimates for PFOA show only low human exposure due to vegetable consumption for adults and children, mostly governed by high intake of potatoes.     

Fluid bed gasification – Plasma converter process generating energy from solid waste: Experimental assessment of sulphur species

Often perceived as a Cinderella material, there is growing appreciation for solid waste as a renewable content thermal process feed. Nonetheless, research on solid waste gasification and sulphur mechanisms in particular is lacking. This paper presents results from two related experiments on a novel two stage gasification process, at demonstration scale, using a sulphur-enriched wood pellet feed.Notable SO₂ and relatively low COS levels (before gas cleaning) were interesting features of the trials, and not normally expected under reducing gasification conditions. Analysis suggests that localised oxygen rich regions within the fluid bed played a role in SO₂’s generation. The response of COS to sulphur in the feed was quite prompt, whereas SO₂ was more delayed. It is proposed that the bed material sequestered sulphur from the feed, later aiding SO₂ generation. The more reducing gas phase regions above the bed would have facilitated COS – hence its faster response. These results provide a useful insight, with further analysis on a suite of performed experiments underway, along with thermodynamic modelling.     

Chromium (VI) remediation by a native strain: effect of environmental conditions and removal mechanisms involved

A native bacterial strain with high capability for Cr (VI) removal was isolated from tannery sediments located in Elena (Córdoba Province, Argentina). The strain was characterized by amplification of 16S rRNA gene and identified as Serratia sp. C8. It was able to efficiently remove different Cr (VI) concentrations in a wide range of pHs and temperatures. The addition of different carbon sources as well as initial inoculum concentration were analyzed, demonstrating that Serratia sp. C8 could reduce 80 % of 20 mg/L Cr (VI) in a medium containing glucose 1 g/L, at pH 6–7 and 28 °C as optimal conditions, using 5 % inoculum concentration. The mechanisms involved in Cr (VI) removal were also evaluated. The strain was capable of biosorpting around 7.5–8.5 % of 20 mg/L Cr on its cell surface and to reduce Cr (VI). In addition, approximately a 54 and 46 % of total Cr was detected in the biomass and in the culture medium, respectively, and in the culture medium, Cr (III) was the predominant species. In conclusion, Serratia sp. C8 removed Cr (VI) and the mechanisms involved in decreasing order of contribution were as follows: reduction catalyzed by intracellular enzymes, accumulation into the cells, and biosorption to the microbial biomass. This strain could be a suitable microorganism for Cr (VI) bioremediation of tannery sediments and effluents or even for other environments contaminated with Cr.     

Phytoremediation of 2,4-dichlorophenol using wild type and transgenic tobacco plants

Introduction

Transgenic plant strategies based on peroxidase expression or overexpression would be useful for phenolic compound removal since these enzymes play an important role in phenolic polymerizing reactions.

Material and methods

Thus, double transgenic (DT) plants for basic peroxidases were obtained and characterized in order to compare the tolerance and efficiency for 2,4-dichlorophenol (2,4-DCP) removal with WT and simple transgenic plants expressing TPX1 or TPX2 gene. Several DT plants showed the expression of both transgenes and proteins, as well as increased peroxidase activity.

Results

DT lines showed higher tolerance to 2,4-DCP at early stage of development since their germination index was higher than that of WT seedlings exposed to 25?mg/L of the pollutant. High 2,4-DCP removal efficiencies were found for WT tobacco plants. TPX1 transgenic plants and DT (line d) reached slightly higher removal efficiencies for 10?mg/L of 2,4-DCP than WT plants, while DT plants (line A) showed the highest removal efficiencies (98%). These plants showed an increase of 21% and 14% in 2,4-DCP removal efficiency for solutions containing 10 and 25?mg/L 2,4-DCP, respectively, compared with WT plants. In addition, an almost complete toxicity reduction of postremoval solutions using WT and DT plants was obtained through AMPHITOX test, which indicates that the 2,4-DCP degradation products would be similar for both plants.

Conclusion

These results are relevant in the field of phytoremediation application and, moreover, they highlight the safety of using DT tobacco plants because nontoxic products were formed after an efficient 2,4-DCP removal.     

Effect of aging on catalytic properties in mechanochemical degradation of pentachlorophenol by birnessite

Mechanochemistry, a technique concerning with milling contaminated samples for prolonged times, induces massive degradation of pollutants by grinding them in ball mills with different soil components or additives. In the present study, laboratory experiments were conducted to evaluate the effect of aging on the mechanochemical efficiency of the Mn-oxide birnessite in degrading pentachlorophenol (PCP). A comparative study on an aged birnessite (KBiA), used after 3 years from synthesis, and a fresh birnessite (KBiF), employed immediately after synthesis, was carried out. The differences between the two birnessites, evidenced by spectroscopic and diffractometric techniques, are mainly relative to reduction of the Mn(IV) centered at the MnO₆ octahedra layers from the birnessite structure, which represent the most reactive sites for PCP degradation. The long term air drying at room temperature, by favouring reduction of Mn(IV) to Mn(III), produces an inorganic substrate that offers paucity of the less reactive sites for PCP degradation, thus reducing the oxidative potential of the KBiA. Accordingly, the more reactive fresh birnessite was employed in the experiment with a polluted soil. Adding a small amount of KBiF to soil only induces a light increase in PCP removal, probably due to the mechanically induced PCP adsorption and transformation onto clay minerals present in the soil. Besides, adding a higher dose of birnessite causes a stronger degradation of PCP.     

Hormetic effect(s) of tetracyclines as environmental contaminant on Zea mays

Animal wastes from intensive pig farming as fertilizers may expose crops to antimicrobials. Zea mays cultivations were carried out on a virgin field, subjected to dressing with pig slurries contaminated at 15 mg L⁻¹ of Oxy- and 5 mg L⁻¹ of Chlor-tetracycline, and at 8 mg L⁻¹ of Oxy and 3 mg L⁻¹ of Chlor, respectively. Pot cultivation was performed outdoor (Oxy in the range 62.5-1000 ng g⁻¹ dry soil) and plants harvested after 45 days. Tetracyclines analyses on soils and on field plants (roots, stalks, and leaves) did not determine the appreciable presence of tetracyclines. Residues were found in the 45-day pot corn only, in the range of 1-50 ng g⁻¹ for Oxy in roots, accounting for a 5% carry-over rate, on average. Although no detectable residues in plants from on land cultivations, both experimental batches showed the same biphasic growth form corresponding to a dose/response hormetic curve.     

The dualistic approach of FCA: a further insight into Ontario Lake sediments

The investigation of object-by-attribute matrices is very common in statistics and data analysis with the aim of uncovering every possible relationship among objects and/or attributes. Formal Concept Analysis (FCA) is a method, which stems directly from partial order and lattice theory, which provides an efficient tool to symmetrically uncover linkages among objects and attributes whenever a relation stands among the two sets. It provides efficacious graphical representation and computes association rules between attributes, thus helping in the detection of possible synergism or antagonism of attributes. In this paper, FCA potentialities are discussed and described by means of a case study already investigated by other partial order techniques: the case of Lake Ontario sediment samples. Data derive from a ‘test battery’ for a simultaneous analysis of degradation of Lake Ontario samples, which are basically of two typologies: hygienic and toxicity tests. A multi-valued approach is adopted to cope with the ordinal feature of data. Results highlight interesting interaction among hygienic compounds and a synergism between the two toxicity tests.     

Application of fluorescence in situ hybridization technique to detect simazine-degrading bacteria in soil samples

We propose a new approach to evaluate the natural attenuation capacity of soil by using fluorescence in situ hybridization (FISH). A specific oligonucleotide probe AtzB1 was designed based on the sequence data of the atzB gene involved in the hydrolytic deamination of s-triazines; this gene, located in a multiple copy plasmid was detected by the optimized FISH protocol. Two agricultural soils (Lodi and Henares) with a history of simazine treatments, and two natural soils (Soto and Monza), without previous exposure to simazine, were studied. AtzB1 probe-target cells were found only in the agricultural soils and, in a greater percentage, in the Lodi soil, compared to the Henares one. Moreover, the greatest percentage of AtzB1 probe-target cells in Lodi was accompanied by a greater mineralization rate, compared to the Henares soil. The FISH method used in this study was suitable for the detection of simazine-degrading bacteria and could be a useful indicator of the potential of soil bioremediation.