Atmospheric heavy metal deposition in Northern Vietnam: Hanoi and Thainguyen case study using the moss biomonitoring technique,INAA and AAS

Background, aim, and scope  

The moss technique is widely used to monitor atmospheric deposition of heavy metals in many countries in Europe, whereas this technique is scarcely used in Asia. To implement this international reliable and cheap methodology in the Asian countries, it is necessary to find proper moss types typical for the Asian environment and suitable for the biomonitoring purposes. Such a case study was undertaken in Vietnam for assessing the environmental situation in strongly contaminated areas using local species of moss Barbula indica.     

Preparation of Sulfurized Powdered Activated Carbon from Waste Tires Using an Innovative Compositive Impregnation Process

Abstract

The objective of this study is to develop an innovative compositive impregnation process for preparing sulfurized powdered activated carbon (PAC) from waste tires. An experimental apparatus, including a pyrolysis and activation system and a sulfur (S) impregnation system, was designed and applied to produce sulfurized PAC with a high specific surface area. Experimental tests involved the pyrolysis, activation, and sulfurization of waste tires. Waste-tire-derived PAC (WPAC) was initially produced in the pyrolysis and activation system. Experimental results indicated that the Brunauer-Emmett-Teller (BET) surface area of WPAC increased, and the average pore radius of WPAC decreased, as water feed rate and activation time increased. In this study, a conventional direct impregnation process was used to prepare the sulfurized PAC by impregnating WPAC with sodium sulfide (Na₂S) solution. Furthermore, an innovative compositive impregnation process was developed and then compared with the conventional direct impregnation process. Experimental results showed that the compositive impregnation process produced the sulfurized WPAC with high BET surface area and a high S content. A maximum BET surface area of 886 m²/g and the S content of 2.61% by mass were obtained at 900°C and at the S feed ratio of 2160 mg Na₂S/g C. However, the direct impregnation process led to a BET surface area of sulfurized WPAC that decreased significantly as the S content increased.     

Polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), dioxin-like polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs) in waterbird eggs of Hong Kong, China

Concentrations of PCDD/Fs, PCBs and PBDEs were measured in 56 egg samples collected from waterbirds of different species (Great Egret, Little Egret, Night Heron and Chinese Pond Heron) from different regions of Hong Kong (Ho Sheung Heung, Mai Po Village and Mai Po Lung Village) during 2000 and 2006. Dominance of 2,3,4,7,8-PeCDF indicates a signature associated with commercial usage of PCBs. Although no significant variations were observed within- and between-site in the levels of PCDD/Fs, coplanar PCBs and PBDEs, the concentrations of coplanar PCBs were much higher than PCDD/Fs. Similarity in composition profiles of PCDD/F and coplanar PCBs from different egretries is possibly associated with non-point sources of these contaminants to Hong Kong. Predominant accumulation of BDE-47, BDE-99 and BDE-100 suggested the penta-BDE technical mixtures usage in Hong Kong and its vicinity. Toxic equivalency and Monte Carlo simulation technique showed potential risks on waterbirds due to their exposure to PCDD/Fs.     

Photocatalytic degradation of methyl orange by a multi-layer rotating disk reactor

Introduction

Solar wastewater treatment based on photocatalytic reactions is a green process that utilizes renewable energy resources and minimizes secondary pollution. Reactor design plays an important role in promoting treatment efficiency and throughput density (based on unit volume of the reactor).

Experimental

A rotating disk reactor that significantly increases the process efficiency has been designed and evaluated for application to photocatalytic decomposition of dye pollutants in aqueous solutions. In this process, a novel multi-layer rotating disk reactor (MLRDR) was presented. Photocatalyst (TiO₂) particles are immobilized on the surfaces of disks. Within each layer of the reactor, methyl orange aqueous solution is allowed to flow from the center of the disk in a radial direction along the surface of the disk, which is rotating at high speed and is irradiated with UV lamps. The effluent is then directed to the center of another layer that lies underneath. Up to four stacked layers have been tested in this study, and the effects due to the number of the layers and volumetric flow rate on reaction conversion are investigated.

Results and discussion

The efficiency of this photocatalytic reactor exhibits complex dependence on these parameters. With selected operating conditions, conversions greater than 95% can be achieved within seconds of residence time. Design equations of the reactor have been derived based on fluid dynamics and kinetic models, and the simulation results show promising scale-up potential of the reactor.     

Radiosynthesis of perfluorooctanesulfonate (PFOS) and perfluorobutanesulfonate (PFBS), including solubility, partition and adhesion studies

Here, we describe for the first time the synthesis of [³⁵S] PFOS and [³⁵S] PFBS with sulfur-35 enriched sulfur dioxide as the radiolabelled reagent, resulting in 2.5 and 2.3 mCi of product, respectively. Basic information concerning the physicochemical properties of perfluorooctanesulfonate (PFOS), perfluorobutanesulfonate (PFBS) and perfluorooctanoic acid (PFOA) are still limited. Hence, we utilized these radiolabelled perfluoroalkanesulfonates (PFSAs), as well as carbon-14 labelled perfluorooctanoic acid ([¹⁴C] PFOA) to determine some basic characteristics of physiological and experimental significance.The solubility of PFOS in buffered aqueous solutions at pH 7.4 was found to be severely reduced in the presence of potassium and sodium ions, which, however, did not reduce the solubility of PFOA or PFBS. PFOS was found to adhere to a small extent to polypropylene and polystyrene, whereas no such adhesion of PFOA or PFBS was detected. The extents of adhesion of PFOS and PFOA to glass were found to be 20% and 10%, respectively. For the first time, the partition coefficients for PFOS, PFBS and PFOA between n-octanol and water were determined experimentally, to be −0.7, −0.3, and 1.4, respectively, reflecting the difference in the amphiphilic natures of these molecules.     

On the use of a freeze-dried versus an air-dried soil humic acid as a surrogate of soil organic matter for contaminant sorption

The sorption of phenanthrene (PHN) to relatively pure soil humic acids (HAs) was investigated to assess the suitability of the soil HA as a surrogate sorbent for the soil organic matter (SOM). The HAs were prepared in both freeze-dried and air-dried forms. The two forms of HAs from the same source are similar in composition but the freeze-dried HAs exhibit a significantly higher initial surface area (SA) (3.86-4.59 m(2)/g); the SAs of air-dried HAs are below 0.1 m(2)/g. However, the SAs of freeze-dried HAs are not stable upon contact with water; the samples lose practically all the SA after 4 days of immersion in water. The PHN sorption to both forms of HAs is practically linear, whether a co-solute is present or not. The sorption linearity observed with the present freeze-dried HAs is in sharp contrast with the allegedly nonlinear PHN sorption on similar freeze-dried HAs as presented by others.     

Species of Trace Metals,Organic Residues and Humic Substances in Sediments From the Taiwan Erhjin River and Coastal Areas

Abstract

Total organic carbon, humic substances, and the species of trace metals (including Cu, Zn, Pb, Cd, Cr, Mn and Fe) in six and seven phases, such as bioexchangeable (P1), skeletal (carbonates, P2), easily reducible (Fe and Mn oxides, P3), moderately reducible (crystalline Mn oxides, P4), organic matters with sulphides (P5), and detritus with minerals (P6) as well as organic with humic substances (PB4) and organic residues (PB6), were analyzed in sediments from the Taiwan Erhjin coastal (including river and estuarine) area, where places we found the copper pollution. Results indicate that higher percentages of P1 and P2 for copper, zinc, lead, cadmium and manganese in samples collected in March and September of 1990 were much higher than those in P3-P6. High percentages of chromium and iron in samples respectively collected in March and September of 1990 were found in P6. for the seven phase analysis, higher percentages of copper species in PB4 and PB6 as well as iron species in PB7 were observed. On the other hand, purified humic acid with the high contents of manganese and iron in humic acid as well as purified fulvic acids were generally found at the upstream stations; and low values at coastal stations. However, extremely high copper (as high as 1750μg g^?1, dry weight in fulvic acid and 820μg g^?1 in humic acid) and lead (821μg g^?1 in humic acid) concentrations with relatively high manganese and iron concentrations were observed in humic substances from the station near the copper recycling area. Comparing the results obtained from the Antarctic Ocean sediments with those from the Taiwan Erhjin Chi coastal sediments, the human impacts on the latter are evaluated.     

Relationship of urinary arsenic metabolites to intake estimates in residents of the Red River Delta, Vietnam

This study investigated the status of arsenic (As) exposure from groundwater and rice, and its methylation capacity in residents from the Red River Delta, Vietnam. Arsenic levels in groundwater ranged from <1.8 to 486 μg/L. Remarkably, 86% of groundwater samples exceeded WHO drinking water guideline of 10 μg/L. Also, estimated inorganic As intake from groundwater and rice were over Provisional Tolerable Weekly Intake (15 μg/week/kg body wt.) by FAO/WHO for 92% of the residents examined. Inorganic As and its metabolite (monomethylarsonic acid and dimethylarsinic acid) concentrations in human urine were positively correlated with estimated inorganic As intake. These results suggest that residents in these areas are exposed to As through consumption of groundwater and rice, and potential health risk of As is of great concern for these people. Urinary concentration ratios of dimethylarsinic acid to monomethylarsonic acid in children were higher than those in adults, especially among men, indicating greater As methylation capacity in children.     

A novel sustainable decision making model for municipal solid waste management

This paper reviews several models developed to support decision making in municipal solid waste management (MSWM). The concepts underlying sustainable MSWM models can be divided into two categories: one incorporates social factors into decision making methods, and the other includes public participation in the decision-making process. The public is only apprised or takes part in discussion, and has little effect on decision making in most research efforts. Few studies have considered public participation in the decision-making process, and the methods have sought to strike a compromise between concerned criteria, not between stakeholders. However, the source of the conflict arises from the stakeholders' complex web of value. Such conflict affects the feasibility of implementing any decision. The purpose of this study is to develop a sustainable decision making model for MSWM to overcome these shortcomings. The proposed model combines multicriteria decision making (MCDM) and a consensus analysis model (CAM). The CAM is built up to aid in decision-making when MCDM methods are utilized and, subsequently, a novel sustainable decision making model for MSWM is developed. The main feature of CAM is the assessment of the degree of consensus between stakeholders for particular alternatives. A case study for food waste management in Taiwan is presented to demonstrate the practicality of this model.