Use of fly ash agglomerates for removal of arsenic

The aim of this work is to investigate the application of fly ash adsorbent for removal of arsenite ions from dilute solution (100–1,000 ppm). Experiments were carried out using material from the “Turów” (Poland) brown-coal-burning power plant, which was wetted, then mixed and tumbled in a granulator to form spherical agglomerates. Measurements of arsenic adsorption from aqueous solution were carried out at room temperature and natural pH of fly ash agglomerates, in either a shaken flask or circulating column, to compare two different methods of contacting solution with adsorbent. Adsorption isotherms of arsenic were determined for agglomerated material using the Freundlich equation. Kinetic studies indicated that sorption follows a pseudo-second-order model. Preferable method to carry out the process is continuous circulation of arsenite solution through a column.     

Remediation of soils on municipal rendering plant territories using Miscanthus × giganteus

Environmental Science and Pollution Research - Phytoremediation, as a cost-effective, highly efficient, environmentally friendly, and green approach, gained attention to the removal of metals,...     

Active methods of mercury removal from flue gases

Due to its adverse impact on health, as well as its global distribution, long atmospheric lifetime and propensity for deposition in the aquatic environment and in living tissue, the US Environmental Protection Agency (US EPA) has classified mercury and its compounds as a severe air quality threat. Such widespread presence of mercury in the environment originates from both natural and anthropogenic sources. Global anthropogenic emission of mercury is evaluated at 2000 Mg year⁻¹. According to the National Centre for Emissions Management (Pol. KOBiZE) report for 2014, Polish annual mercury emissions amount to approximately 10 Mg. Over 90% of mercury emissions in Poland originate from combustion of coal.

The purpose of this paper was to understand mercury behaviour during sub-bituminous coal and lignite combustion for flue gas purification in terms of reduction of emissions by active methods. The average mercury content in Polish sub-bituminous coal and lignite was 103.7 and 443.5 μg kg⁻¹. The concentration of mercury in flue gases emitted into the atmosphere was 5.3 μg m⁻³ for sub-bituminous coal and 17.5 μg m⁻³ for lignite. The study analysed six low-cost sorbents with the average achieved efficiency of mercury removal from 30.6 to 92.9% for sub-bituminous coal and 22.8 to 80.3% for lignite combustion. Also, the effect of coke dust grain size was examined for mercury sorptive properties. The fine fraction of coke dust (CD) adsorbed within 243–277 μg Hg kg⁻¹, while the largest fraction at only 95 μg Hg kg⁻¹. The CD fraction < 0.063 mm removed almost 92% of mercury during coal combustion, so the concentration of mercury in flue gas decreased from 5.3 to 0.4 μg Hg m⁻³. The same fraction of CD had removed 93% of mercury from lignite flue gas by reducing the concentration of mercury in the flow from 17.6 to 1.2 μg Hg m⁻³. The publication also presents the impact of photochemical oxidation of mercury on the effectiveness of Hg vapour removal during combustion of lignite. After physical oxidation of Hg in the flue gas, its effectiveness has increased twofold.

     

Phenolic compounds in leaves of Salix species and hybrids growing under different soil conditions

The leaves of eight Salix species/hybrids were collected from two sites with different soil conditions including metal concentrations to investigate the concentration of Cu, Zn and Pb, phenolic profile and antioxidant scavenging activity. Cu, Zn and Pb, phenolic content and scavenging activity in leaves from the control area (lower concentration of metals in soil) (site C) were lower than in plants cultivated in site G (higher concentration of metals in soil). The content of Cu, Pb and Zn in leaves was in the range 9.21 (site G)–52.36 (site G), 0.41 (site C)?12.03 (site C) and 27.23 (site C)–214.44 (site G) mg?kg^?1, respectively. Total phenolic content ranged between 18.19 (site C) and 84.71 (site G) mg gallic acid equivalent per gram of dry matter. Total flavonoid content was between 7.98 (site C) and 54.48 (site G) mg catechin g^?1?d.m. The scavenging effect on 2,2-diphenyl-1-picrylhydrazyl˙ ranged between 33.6% (site C) and 56.3% (site G). Phenolic acids, myricetin and quercetin were quantified in leaves. The results show that phenolics are involved during adaptive mechanisms under elevated content of Cu, Pb and Zn in soil. Changes in the phenolic composition in leaves can be suggested as indicators of metal stress in Salix plants.     

Multi-elemental analysis of Lentinula edodes mushrooms available in trade

ABSTRACT

The present study investigated the content of 62 elements in the fruiting bodies of Lentinula edodes (Shiitake mushroom) cultivated commercially in Poland on various substrates from 2007–2015. The general mean content (mg kg^?1 dry weight (DW)) of the studied elements ranked in the following order: K (26,335) > P (11,015) > Mg (2,284) > Ca (607) > Na (131) > Zn (112) > Fe (69) > Mn (33) > B (32) > Rb (17) > Cu (14.5) > Al (11.2) > Te (2.9) > As (1.80) > Cd (1.76) > Ag (1.73) > Nd (1.70) > Sr (1.46) > Se (1.41) > U (1.11) > Pt (0.90) > Ce (0.80) > Ba (0.61) > Co (0.59) > Tl (0.58) > Er (0.50) > Pb (0.42) > Li (0.40) > Pr (0.39) > Ir (0.37) > In (0.35) > Mo (0.31) > Cr (0.29) > Ni (0.28) > Sb (0.26) > Re (0.24) > Ti (0.19) > Bi (0.18) > Th (0.12) > La (0.10) = Pd (0.10) > Os (0.09) = Zr (0.09) > Rh (0.08) > Ho (0.07) > Ru (0.06) > Sm (0.04) = Eu (0.04) = Tm (0.04) > Gd (0.03) > Sc (0.02) = Y (0.02) > Lu (0.01) = Yb (0.01) = V (0.01). The contents of Au, Be, Dy, Ga, Ge, Hf, and Tb were below the limits of detection (0.02, 0.02, 0.01, 0.01, 0.01, 0.01, 0.02 mg kg^?1 respectively). The concentrations of Al, As, B, Ba, Ca, Cd, Cr, Er, Fe, In, Lu, Mn, Nd, Sr, Ti, Tm, and Zr were comparable over the period the mushrooms were cultivated. The study revealed that Lentinula edodes contained As and Cd at levels potentially adverse to human health. This highlights the need to monitor these elements in food products obtained from this mushroom species and ensure that only low levels of these elements are present in cultivation substrates.     

Sulfadimethoxine and sulfaguanidine: their sorption potential on natural soils

Sulfonamides (SAs) are one of the oldest groups of veterinary chemotherapeutic agents. As these compounds are not completely metabolized in animals, a high proportion of the native form is excreted in feces and urine. They are therefore released either directly to the environment in aquacultures and by grazing animals, or indirectly during the application of manure or slurry. Once released into the environment, SAs become distributed among various environmental compartments and may be transported to surface or ground waters. The physicochemical properties of SAs, dosage and nature of the matrix are the factors mainly responsible for their distribution in the natural environment. Although these rather polar compounds have been in use for over half a century, knowledge of their fate and behavior in soil ecosystems is still limited. Therefore, in this work we have determined the sorption potential of sulfadimethoxine and sulfaguanidine on various natural soils. The influence on sorption of external factors, such as ionic strength and pH, were also determined. The sorption coefficients (K_d) obtained for the sulfonamides investigated were quite low (from 0.20 to 381.17 mL g⁻¹ for sulfadimethoxine and from 0.39 to 35.09 mL g⁻¹ for sulfaguanidine), which indicated that these substances are highly mobile and have the potential to run off into surface waters and/or infiltrate ground water. Moreover, the sorption of these pharmaceuticals was found to be influenced by OC, soil solution pH and ionic strength, with higher K_d values for soils of higher OC and lower K_d values with increasing pH and ionic strength.     

Pesticide burial grounds in Poland: a review

Obsolete pesticides were stored in Poland from the middle sixties until the late eighties of the 20th century mostly in underground disposal sites, called "pesticide burial grounds" or "pesticide tombs". The total amount of pesticide waste and packaging materials disposed of in these landfills exceeded 20000 Mg. Typically, the content of a pesticide tomb was dominated by organochlorine pesticides (comprising 10-100% of the total waste volume) with DDT as the prevailing compound. Other pesticide types, such as phosphoroorganic, carbamate insecticides, dinitrophenols, phenoxyacids, and inorganic compounds were stored in smaller quantities, usually not exceeding 10-20% of the total waste volume. With the growing awareness of the threats that these landfills posed to the environment, the first inventory for the whole country was made in 1993 and remediation was initiated in 1999. The total amount of waste, which had to be removed from the known pesticide tombs (hazardous substances, contaminated soils, construction materials etc.) was about 100000 Mg. According to the National Waste Management Plan, the reclamation of pesticide tombs was assumed to have been finished by the end of 2010, however, this goal has not been achieved. The aim of this review is to present a historical perspective of pesticide burial grounds in Poland with an emphasis on their creation, function, inventory, and remediation. Based on unpublished reports, and other published materials of limited availability written in Polish, this review may serve as a source of information for representatives of other countries, where remediation of pesticide burial grounds is still in progress. The experience gained over a ten-year period, when restoration of pesticide tombs was implemented in Poland, reveals that there are many obstacles to this action arising not only from technical, but also from economic and social issues.     

Sorption of ionic liquids onto soils: experimental and chemometric studies

Chemometric analyses are a great tool to support typical experimental studies of the interactions of xenobiotics with natural environment. Such interpretations are able to determine statistically significant correlations and finally lead to identification of the major sorption factors. However, to effectively use chemometrics a bigger data set is required. Even though the ionic liquids are intensively studied, their complete fate or prediction of their behavior in the natural environment is still unclear. Therefore, to evaluate and distinguish the patterns of interactions of ILs in soil environment by chemometrics, sorption of nine ionic liquids (imidazolium and pyridinium chlorides) on 11 types of various soils was tested. Experimental studies indicated that compounds with longer alkyl side chains were sorbed far more strongly than weakly lipophilic ones. Moreover, salts with short and/or hydroxylated derivatives were more mobile in soils/sediments and thus, might cause a danger of contamination of surface or ground waters. Cluster analysis revealed that ionic liquids form two major clusters according to interaction with soil surface - one grouping compounds with short and hydroxylated alkyl side chains and the second with the rest of compounds. Pairwise scatterplots for correlations between soil variables and sorption coefficients indicated that the main soil parameter responsible for the sorption was cation exchange capacity. Correlation of sorption coefficients, K(d), with pH indicated the existence of lower sorption potency in lower pH values.     

Adsorption of Remazol Red 198 onto magnetic N-lauryl chitosan particles: equilibrium, kinetics, reuse and factorial design

Purpose

The discharge of colored effluents from industries is an important environmental issue and it is indispensable to remove the dyes before the water gets back to the rivers. The magnetic adsorbents present the advantage of being easily separated from the aqueous system after adsorption by positioning an external magnetic field.

Methods

Magnetic N-lauryl chitosan (L-Cht/??-Fe₂O₃) particles were prepared and characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, transmission electron microscopy, and vibrating sample magnetometry. Remazol Red 198 (RR198) was used as a reactive dye model for adsorption on L-Cht/??-Fe₂O₃. The adsorption isotherms were performed at 25°C, 35°C, 45°C, and 55°C and the process was optimized using a 2³ factorial design (analyzed factors: pH, ionic strength, and temperature). The desorption and regeneration studies were performed in a three times cycle.

Results

The characterization of the material indicated that the magnetic particles were introduced into the polymeric matrix. The pseudo-second order was the best model for explaining the kinetics and the Langmuir?CFreundlich was the best-fitted isotherm model. At room temperature, the maximum adsorption capacity was 267?mg?g^?1. The material can be reused, but with a decrease in the amount of adsorbed dye.

Conclusions

L-Cht/??-Fe₂O₃ is a promising material to remove RR198 and probably other similar reactive dyes from aqueous effluents.     

Utility of Gridded Rainfall for IHACRES Daily River Flow Predictions in Southern California Watersheds1

Abstract: Studies to regionalize conceptual hydrologic models generally require rainfall and river flow data from multiple watersheds. Besides the considerable time (cost) to assemble and process rainfall data for many watersheds, investigators often need to choose from a number of candidate gauges, subjectively weighing the relative importance of proximity and elevation to select a representative rainfall dataset. The Unified Raingauge Dataset (URD) is a gridded daily rainfall dataset that covers the conterminous United States at 0.25 × 0.25 degrees spatial resolution and is available from 1948 to present. The objective of this study was to determine whether uncertainty in daily river flow predictions using the conceptual hydrologic model IHACRES in small to moderate size watersheds (50‐400 km²) in southern California would increase if URD gridded rainfall data were used in place of single rain gauge data to calibrate the model. Rain gauge data were obtained from the gauge nearest the watershed centroid and the gauge closest in elevation to the watershed mean elevation. Results from 20 randomly selected watersheds indicated that IHACRES calibration performance was similar using rainfall data from the URD grids and rain gauge data. There was some evidence of greater uncertainties associated with the URD calibrations in areas where topography may affect rainfall amounts. In contrast to the URD data, monthly gridded data produced by the Parameter‐Elevation Regressions on Independent Slopes Model (PRISM) includes adjustments for elevation and produces gridded values at a finer spatial resolution (4 km²). A limited test on two watersheds demonstrated that scaling the URD daily rainfall estimates to match the PRISM monthly values may improve rainfall estimates and model simulation performance.