A review on remediation technologies using functionalized Cyclodextrin

Environmental Science and Pollution Research - Modern lifestyle and alleviated anthropogenic activities have increased the pollutant load, ultimately causing stress on the environment. In...     

Factors and sources influencing ionic composition of atmospheric condensate during winter season in lower troposphere over Delhi, India

Atmospheric condensate (AC) and rainwater samples were collected during 2010–2011 winter season from Delhi and characterized for major cations and anions. The observed order of abundance of cations and anions in AC samples was NH ₄ ⁺ ?>?Ca²⁺?>?Na⁺?>?K⁺?>?Mg²⁺ and HCO ₃ ^? ?>?SO ₄ ^2? ?>?Cl^??>?NO ₂ ^? ?>?NO ₃ ^? ?>?F^?, respectively. All samples were alkaline in nature and Σ _cation/Σ _anion ratio was found to be close to one. NH ₄ ⁺ emissions followed by Ca²⁺ and Mg²⁺ were largely responsible for neutralization of acidity caused by high NO _x and SO₂ emissions from vehicles and thermal power plants in the region. Interestingly, AC samples show low nitrate content compared with its precursor nitrite, which is commonly reversed in case of rainwater. It could be due to (1) slow light-mediated oxidation of HONO; (2) larger emission of NO₂ and temperature inversion conditions entrapping them; and (3) formation and dissociation of ammonium nitrite, which seems to be possible as both carry close correlation in our data set. Principal component analysis indicated three factors (marine mixed with biomass burning, anthropogenic and terrestrial, and carbonates) for all ionic species. Significantly higher sulfate/nitrate ratio indicates greater anthropogenic contributions in AC samples compared with rainwater. Compared with rainwater, AC samples show higher abundance of all ionic species except SO₄, NO₃, and Ca suggesting inclusion of these ions by wash out process during rain events. Ionic composition and related variations in AC and rainwater samples indicate that two represent different processes in time and space coordinates. AC represents the near-surface interaction whereas rainwater chemistry is indicative of regional patterns. AC could be a suitable way to understand atmospheric water interactions with gas and solid particle species in the lower atmosphere.     

Toxic metals and organochlorine pesticides residue in single herbal drugs used in important ayurvedic formulation – ‘Dashmoola’

Herbal formulations are getting popularity throughout the world and commercialized extensively for various medicinal properties. WHO has emphasized the need for quality assurance of herbal products, including testing of heavy metals and pesticides residues. 'Dashmoola', a popular herbal formulation, with immunomodulator and febrifugal properties, consists of ten single root drugs. In view of WHO guidelines, single herbal drugs used in 'Dashmoola', were collected from different places of India for testing heavy metals and persistent pesticides residue. Although use of roots in 'Dashmoola' is prescribed in original ayurvedic literature but now many pharmacies use stem in place of roots. Therefore, in the present study both roots and stems were selected for estimation of six heavy metals namely arsenic (As), mercury (Hg), lead (Pb), cadmium (Cd), chromium (Cr) and nickel (Ni). Apart from these, the organochlorine pesticides residue viz. different metabolites of DDT, DDE, isomers of HCH and alpha-endosulfan were checked in total 40 samples of single crude drugs. Heavy metals except Hg, were present in most of the samples. In few samples Pb and Cd concentration were beyond the WHO permissible limits. Although alpha-HCH and gamma-HCH were present in almost all the samples, but other pesticides were not detected in these samples. DDT and DDE were found only in two samples.     

Multi-objective reverse logistics model for integrated computer waste management.

This study aimed to address the issues involved in the planning and design of a computer waste management system in an integrated manner. A decision-support tool is presented for selecting an optimum configuration of computer waste management facilities (segregation, storage, treatment/processing, reuse/recycle and disposal) and allocation of waste to these facilities. The model is based on an integer linear programming method with the objectives of minimizing environmental risk as well as cost. The issue of uncertainty in the estimated waste quantities from multiple sources is addressed using the Monte Carlo simulation technique. An illustrated example of computer waste management in Delhi, India is presented to demonstrate the usefulness of the proposed model and to study tradeoffs between cost and risk. The results of the example problem show that it is possible to reduce the environmental risk significantly by a marginal increase in the available cost. The proposed model can serve as a powerful tool to address the environmental problems associated with exponentially growing quantities of computer waste which are presently being managed using rudimentary methods of reuse, recovery and disposal by various small-scale vendors.     

Effect of biosludge and biofertilizer amendment on growth of Jatropha curcas in heavy metal contaminated soils

The pot experiments were conducted to evaluate the effect of different concentrations of arsenic, chromium and zinc contaminated soils, amended with biosludge and biofertilizer on the growth of Jatropha curcas which is a biodiesel crop. The results further showed that biosludge alone and in combination with biofertilizer significantly improved the survival rates and enhanced the growth of the plant. With the amendments, the plant was able to grow and survive upto 500, 250 and 4,000 mg kg(-1) of As, Cr and Zn contaminated soils, respectively. The results also showed that zinc enhanced the growth of J. curcas more as compared to other metals contaminated soils. The heavy metal accumulation in plant increased with increasing concentrations of heavy metals in soil, where as a significant reduction in the metal uptake in plant was observed, when amended with biosludge and biofertilizer and biosludge alone. It seems that the organic matter present in the biosludge acted as metal chelator thereby reducing the toxicity of metals to the plant. Findings suggest that plantation of J. curcas may be promoted in metal contaminated soils, degraded soils or wasteland suitably after amending with organic waste.     

Studies on the removal of nickel from aqueous solutions using modified riverbed sand

This paper highlights the utility of riverbed sand (RS) for the treatment of Ni(II) from aqueous solutions. For enhancement of removal efficiency, RS was modified by simple methods. Raw and modified sands were characterized by scanning electron microscope (SEM), Energy Dispersive Spectroscopy (EDS), and Fourier Transform Infrared Spectroscopy (FTIR) to investigate the effect of modifying the surface of RS. For optimization of various important process parameters, batch mode experiments were conducted by choosing specific parameters such as pH (4.0–8.0), adsorbent dose (1.0–2.0 g), and metal ion concentrations (5–15 mg/L). Removal efficiency decreased from 68.76 to 54.09 % by increasing the concentration of Ni(II) in solution from 5 to 15 mg/L. Removal was found to be highly dependent on pH of aqueous solutions and maximum removal was achieved at pH 8.0. The process of removal follows first-order kinetics, and the value of rate constant was found to be 0.048 min^?1 at 5 mg/L and 25 °C. Value of intraparticle diffusion rate constant (k _id) was found to be 0.021 mg/g min^1/2 at 25 °C. Removal of Ni(II) decreased by increasing temperature which confirms exothermic nature of this system. For equilibrium studies, adsorption data was analyzed by Freundlich and Langmuir models. Thermodynamic studies for the present process were performed by determining the values of ΔG°, ΔH°, and ΔS°. Negative value of ?H° further confirms the exothermic nature of the removal process. The results of the present investigation indicate that modified riverbed sand (MRS) has high potential for the removal of Ni(II) from aqueous solutions, and resultant data can serve as baseline data for designing treatment plants at industrial scale.     

Development of controlled release formulations of thiram employing amphiphilic polymers and their bioefficacy evaluation in seed quality enhancement studies

Controlled release formulations of Thiram (Dimethylcarbamothioylsulfanyl-N,N-dimethylcarbamodithioate), a contact fungicide, have been prepared using laboratory synthesized poly(ethylene glycol) (PEG) based functionalized amphiphilic copolymers. The kinetics of thiram from developed controlled release (CR) formulations were studied in comparison with that of the commercially available 75 WS. Release from the commercial formulation was faster than with the developed CR formulations. Maximum amount of thiram was released on 35th day for PEG-2000 4d, 28th day for PEG-1500 4c, 21st day for PEG-1000 4b and 15th day for PEG-600 4a in comparison to commercial formulation (7th day). The diffusion exponent (n) of thiram in water ranged from 0.356 to 0.545 in the tested formulations. The half-release (t_1/2) values ranged between 14.78 to 22.1 days, and the Period of Optimum Availability (POA) of thiram ranged from 7.79 to 25.15 days. An effort has also been made to identify the suitable polymers that could reduce the seed deterioration during storage and also act as an effective carrier of fungicide thiram. The results demonstrate that the seeds coated with the different formulations deteriorated at a slower pace as manifested in high germination percentage over control. Apart from the fungicidal effect of thiram, the polymers acted as barriers to moisture reducing the rate of seed deterioration and checked the degradation of thiram. The CR formulation 4d, with PEG 2000, was found to be most effective as seed coat.     

Dietary Spirulina platensis alleviates aluminum and aluminum fluoride induced histopathological and biochemical alterations in mice kidney

Aluminum and its salts widely used in our daily life have been reported nephrotoxic to humans and animals following prolonged exposure. Therefore, the present study was made to examine the renoprotective role of Spirulina platensis against Al³⁺ and AlF₃ in male Swiss albino mice. Exposure to these chemicals decreased feed and water intake, and body and kidney weights. Histology of kidney and their biochemistry were also markedly altered along with that of serum biochemistry. Spirulina not only minimize toxic effects of test chemicals but also favored faster recovery of treated mice after their withdrawal.     

Selenium status in food grains of northern districts of India

The selenium status in the food grains of the agricultural lands of northern parts of India was estimated by using the HG-AAS technique. The areas where lesser rains were received or less irrigation water was available in northern Indian states viz. Rajasthan and southern parts of the Haryana had higher selenium levels in food grains. Punjab, Himachal Pradesh and northern parts of the Haryana states had normal levels of selenium in their food grains, except for slightly lower selenium levels in a few areas that were affected by floods along the river Yamuna.