Pilot project at Hazira,India, for capture of carbon dioxide and its biofixation using microalgae

The objective of the present study was to set up a small-scale pilot reactor at ONGC Hazira, Surat, for capturing CO₂ from vent gas. The studies were carried out for CO₂ capture by either using microalgae Chlorella sp. or a consortium of microalgae (Scenedesmus quadricauda, Chlorella vulgaris and Chlorococcum humicola). The biomass harvested was used for anaerobic digestion to produce biogas. The carbonation column was able to decrease the average 34 vol.% of CO₂ in vent gas to 15 vol.% of CO₂ in the outlet gas of the carbonation column. The yield of Chlorella sp. was found to be 18 g/m²/day. The methane yield was 386 l CH₄/kg VS_fed of Chlorella sp. whereas 228 l CH₄/kg VS_fed of the consortium of algae.     

Effect of heavy metals and phenol on bacterial decolourisation and COD reduction of sucrose-aspartic acid Maillard product

Melanodins are amino-carbonyl complex, predominantly present in sugarcane molasses based distillery wastewater as major source of colourant. The microbial decolourisation of melanoidin is a challenge due to its binding property with other co-pollutants of distillery waste. Results revealed that the presence of Zn2+ (2.00-20.00 mg/L) in melanoidin solution (1200 mg/L) stimulated the bacterial growth and sucrose-aspartic acid Maillard product (SAA) decolourisation as compared to control, while Fe 3+ and Mn2+ at the same concentration inhibited the process. However, the presence of phenol (100 mg/L) along with Zn2+ , Fe3+ and Mn2+ suppressed the bacterial growth, SAA decolourisation and MnP activity. The shrinkage and reduced number of bacterial cell count at higher concentration of heavy metals in presence of phenol was also observed under scanning electron microscope.     

Physicochemical characteristics of paper industry effluents��a case study of South India Paper Mill (SIPM)

Pulp and paper mills generate varieties of pollutants depending upon type of the pulping process being used. This paper presents the characteristics of wastewater from South India Paper Mill, Karnataka, India which is using recycled waste paper as a raw material. The raw wastewater consists of 80?C90 mg L^???1 suspended solid and 1,010?C1,015 mg L^???1 dissolved solid. However, pH varied from 5.5?C6.8. The biochemical oxygen demand and chemical oxygen demand ranged from 200?C210 and 1,120?C1,160 mg L^???1, respectively. Aerobic treatment of raw effluent attribute to significant reduction in suspended solid (range between 25 to 30 mg L^???1) and total dissolved solid (range between 360 to 390 mg L^???1). However, pH, temperature, and electrical conductivity were found superior after treatment. Copper, cadmium, iron, lead, nickel, and zinc were found in less quantity in raw effluent and were almost completely removed after treatment. The dendrogram of the effluent quality parameters clearly indicate that South India Paper Mill does not meet Minimal National Standard set by central Pollution Control Board to discharge in agricultural field.     

Trends and Perspectives of Biosensors for Food and Environmental Virology

Food and environmental virology has become a very important and interesting area of research because of food safety and public health concerns. During the last few decades, increasing foodborne diseases and environmental generated illnesses are considered to be highly challenging issues. Biosensor technology holds great promise for the healthcare market, and the security sector. Similar to clinical diagnostic tools, biosensors are being developed for the rapid, reliable, yet inexpensive identification and enumeration of pathogenic viruses which are adulterating environment, food and feed commodities. In this modern era, bio-and nano-technologies play a pivotal role in virological diagnostics of food industry, environmental and veterinary samples. This review covers the recent advances and future prospects of nanotechnology-based bioanalytical microsystems for food and environmental virology.     

Impact of vehicular exhaust on ambient air quality of Rohtak city, India

In the present study, ambient air quality of Rohtak city (Haryana) was monitored by High Volume Sampler. The selected parameters to judge the quality of air were Sulphur dioxide (SO2), Nitrogen dioxide NO), Ozone (O3) and Suspended particulate matters (SPM) which give a fair idea of pollution load carried by the air. The monitoring data were collected from six sites randomly selected in Rohtak city. Sulphur dioxide was found below the permissible limits of National Ambient Avo Quality Standards (NAAQS) at all the sites. Higher concentration of SO2 was observed during winter in comparison to summer and monsoon seasons. Nitrogen dioxide concentration was found to be above the prescribed standards of NAAOS at four sites in winter season. Ozone concentration was found below the prescribed standards (NAAOS), but its concentration was higher in summer season as compared to winter. Suspended particulate matter concentration was observed above the safety limits at all the sites in all three seasons.     

Mapping aboveground woody biomass using forest inventory,remote sensing and geostatistical techniques

Mapping forest biomass is fundamental for estimating CO₂ emissions, and planning and monitoring of forests and ecosystem productivity. The present study attempted to map aboveground woody biomass (AGWB) integrating forest inventory, remote sensing and geostatistical techniques, viz., direct radiometric relationships (DRR), k-nearest neighbours (k-NN) and cokriging (CoK) and to evaluate their accuracy. A part of the Timli Forest Range of Kalsi Soil and Water Conservation Division, Uttarakhand, India was selected for the present study. Stratified random sampling was used to collect biophysical data from 36 sample plots of 0.1 ha (31.62 m?×?31.62 m) size. Species-specific volumetric equations were used for calculating volume and multiplied by specific gravity to get biomass. Three forest-type density classes, viz. 10–40, 40–70 and >70 % of Shorea robusta forest and four non-forest classes were delineated using on-screen visual interpretation of IRS P6 LISS-III data of December 2012. The volume in different strata of forest-type density ranged from 189.84 to 484.36 m³ ha^?1. The total growing stock of the forest was found to be 2,024,652.88 m³. The AGWB ranged from 143 to 421 Mgha^?1. Spectral bands and vegetation indices were used as independent variables and biomass as dependent variable for DRR, k-NN and CoK. After validation and comparison, k-NN method of Mahalanobis distance (root mean square error (RMSE)?=?42.25 Mgha^?1) was found to be the best method followed by fuzzy distance and Euclidean distance with RMSE of 44.23 and 45.13 Mgha^?1 respectively. DRR was found to be the least accurate method with RMSE of 67.17 Mgha^?1. The study highlighted the potential of integrating of forest inventory, remote sensing and geostatistical techniques for forest biomass mapping.     

Synthesis,characterization, and systematic studies of a novel aluminum selective chelating resin

A procedure is detailed for the selective analysis of trace aluminum by flame atomic absorption spectrophotometer coupled with off-line column separation and preconcentration. Chelating resin was synthesized by covalent functionalization of Amberlite XAD-16 by 2-(2-hydroxyphenyl) benzoxazole. The modified resin was characterized using FT-IR spectroscopy, energy dispersive x-ray analysis, elemental analysis, thermogravimetric analysis/differential thermal analysis, and minimum energy run. The optimum sorption was at pH 9?±?0.1 with corresponding t _1/2 of only 7 min. Many competitive anions and cations studied did not interfere at all in the selective determination of Al(III), at the optimized conditions. The resin shows maximum sorption capacity of 21.58 mg g^?1 and can be regenerated up to 75 cycles without any discernible capacity loss. The Langmuir isotherm model provides the better correlation of the experimental data (r ²?=?0.999) in comparison to Freundlich isotherm model, while the Scatchard analysis revealed homogeneous binding sites in the chelating resin. Analytical figures of merit were evaluated by accuracy (standard reference materials and recovery experiment), precision (RSD <5 %), and detection limit (2.8 μg L^?1). The applicability was demonstrated by analysis of trace aluminum in biological, environmental, and food samples.     

Evaluation of physiological, growth and yield responses of a tropical oil crop (Brassica campestris L. var. Kranti) under ambient ozone pollution at varying NPK levels

A field study was conducted to evaluate the impact of ambient ozone on mustard (Brassica campestris L. var. Kranti) plants grown under recommended and 1.5 times recommended NPK doses at a rural site of India using filtered (FCs) and non-filtered open top chambers (NFCs). Ambient mean O₃ concentration varied from 41.65 to 54.2 ppb during the experiment. Plants growing in FCs showed higher photosynthetic rate at both NPK levels, but higher stomatal conductance only at recommended NPK. There were improvements in growth parameters and biomass of plants in FCs as compared to NFCs at both NPK levels with higher increments at 1.5 times recommended. Seed yield and harvest index decreased significantly only at recommended NPK in NFCs. Seed quality in terms of nutrients, protein and oil contents reduced in NFCs at recommended NPK. The application of 1.5 times recommended NPK provided protection against yield loss due to ambient O₃.