粉末活性炭对三烯丙基异氰脲酸酯的吸附性能简

用静态吸附法考察粉末活性炭对水中三烯丙基异氰脲酸酯（CAIC）的吸附行为，采用单因素分析法对活性炭吸附化工废水中TAIC的工艺条件进行研究。实验结果表明，在TAIC模拟废水中，其TAIC初始浓度为800 mg/L，pH为7，在温度为298 K、转速为150 r/min的条件下，当活性炭的投加量达到4.4 g/L，吸附反应时间为50 min时，TAIC的去除效率最高为96.17%；对于实际废水，其TAIC初始浓度为1 500 mg/L，溶液pH为3，在温度为298 K、转速为150 r/min的条件下，当活性炭投加量达到10 g/L，吸附反应时间为2 h时，TAIC的去除效率最高为46.8%。这也是由于实际废水组分复杂，其他有机物存在一定的吸附竞争机制。     

介质阻挡放电协同Ag/Al_2O_3对NO_x脱除的影响

为有效去除发电厂烟气中产生的NOx,利用介质阻挡放电(DBD)产生低温等离子体并结合催化剂Ag/Al2O3进行烟气脱硝实验,研究了在加入乙烯的条件下,平均负载量、催化温度和装置的布置方式对NOx脱除的影响。结果表明,随着负载的增多,NO脱除率呈现先增大后减小的趋势,5种负载量中最佳为1.76%;随着催化温度的升高,NO脱除率同样呈现先增大后减小的趋势,最佳的催化温度为150℃左右;3种不同布置方式对NO和NOx脱除有明显差别,单独催化剂在NO和NOx的脱除率都比较低;单独介质阻挡放电NO脱除率很高,但是NOx很却很低;而两者结合在NO和NOx都达到了很好的效果。     

Environmental pollutants and type 2 diabetes: a review of human studies

The incidence of diabetes has increased dramatically in recent decades and become one of the leading health problems worldwide. Lifestyle and dietary changes alone cannot account for the dramatic rise of diabetes, while an increasing number of publications have reported the possible relationships between exposure to environmental pollutants and risk of diabetes. In the present review, our objective was to summarize the human studies on environmental pollutants, which includes persistent organic pollutants, pesticides (not on the Stockholm Convention list), bisphenol A, and phthalates, and the risk of diabetes. Currently published results suggest a positive relationship between certain persistent organic pollutants (dichlorodiphenyldichloroethene, dichlorodiphenyltrichloroethane, hexachlorobenzene, and polychlorinated biphenyls) and bisphenol A exposure and risk of diabetes. For pyrethroids, organophosphates, carbamates, and phthalates, there are insufficient studies to reach conclusions and therefore more studies, especially prospective studies, are needed along with in vivo and in vitro studies to understand the underlying mechanisms.     

Study on the effect of public participation on air pollution control based on China's Provincial level data

Environment, Development and Sustainability - Air pollution treatment has become the priority in environmental management for Chinese government. However, environmental problems are closely related...     

A fractal derivative model to quantify bed-load transport along a heterogeneous sand bed

Environmental Fluid Mechanics - Bed-load transport is a complex process exhibiting anomalous dynamics, which cannot be efficiently described using the traditional advection–diffusion...     

Performance evaluation of circulating fluidized bed incineration of municipal solid waste by multivariate outlier detection in China

This first nationwide survey was conducted to evaluate the overall performance of the circulating fluidized bed (CFB) incineration of municipal solid waste (MSW) in 2014-2015 in China. Total 23 CFB incineration power plants were evaluated. The data for monthly average flue gas emission of particles, CO, NO _x , SO₂ and HCl were collected over 12 consecutive months. The data were analyzed to assess the overall performance of CFB incineration by applying the Mahalanobis distance as a multivariate outlier detection method. Although the flue gas emission parameters had met the Chinese national emission standards, there were 11 total outliers (abnormal behavior) detected in 6 out of 23 CFB incineration power plants from the perspective of the MSWincineration performance. The results demonstrate that it is more important for a better performance of CFBs to reduce the frequencies of the MSW load changes, rather than the magnitudes of the MSW load changes, particularly reducing the frequencies in the range of 10% and more of the load changes, under the same and stable conditions. Furthermore, the overloading occurs more often than the underloading during the operation of the CFB incineration power plants in China. The frequent overloading is 0% to 30% of the designed capacity. To achieve the stable performance of CFBs in practice, an appropriately designed MSW storage capacity is suggested to build in a plant to buffer and reduce the frequency of the load changes.

Open image in new window

     

炼油废水污泥脱水工艺条件的优化

采用化学除油降黏—污泥调理—离心脱水工艺处理某炼油厂废水处理系统的混合污泥，并对工艺条件进行优化。实验结果表明，最佳的工艺条件为：化学除油降黏阶段处理体系的pH=4，反应温度35 ℃，H₂O₂加入量 2 g/L，m（H₂O₂）∶ m（Fe²⁺）=4，反应时间 60 min；污泥调理反应阶段的CaO加入量7.0 g/L；离心脱水阶段在分离因数为1 558时脱水5 min。在此条件下，得到的泥饼的含水率为70.0%~75.0%（w），含油率小于2%（w），污泥比阻约为3.0×10⁷ s²/g。     

分子筛催化剂生产废水的生物处理

采用氨化—硝化—反硝化三段联合生物工艺处理分子筛催化剂生产过程中产生的含有机胺废水。实验结果表明：在氨化过程中，当进水COD稳定为1 200~1 600 mg/L时，出水COD低于300 mg/L，COD去除率稳定在80%左右，当进水ρ（有机氮）为100~160 mg/L时，出水ρ（有机氮）均低于30 mg/L，有机氮去除率大于80%，在整个氨化过程中，出水ρ（氨氮）较进水ρ（氨氮）提高了35~200 mg/L;硝化过程中，当进水ρ（氨氮）小于等于300 mg/L时，出水ρ（氨氮）最终稳定在15 mg/L以内，氨氮去除率大于90%;在反硝化过程中，亚硝酸盐氮去除率基本稳定在98%以上，最终出水COD低于80 mg/L，出水ρ（总氮）低于25 mg/L。     

游泳池中隐孢子虫卵囊替代物的去除

隐孢子虫是常见的球状寄生虫。接触含有隐孢子虫卵囊的水体可致隐孢子虫病,主要的临床表现为腹泻,严重者可致死。游泳池是主要的传播场所。采用容积为5 500 L的游泳池,进行隐孢子虫卵囊替代物的修复模拟实验,研究在游泳池条件下絮凝沙滤技术对直径为4.5μm隐孢子虫卵囊替代物的去除效果。实验结果表明,氯化铝剂量为0.1 mg/L,沙滤料高度为30 cm,内循环流速为11.5 L/min,对隐孢子虫卵囊替代物去除率在90%以上。该技术对浊度具有较好的处理效果,当进水浊度降低且接近于出水浊度时,系统进入稳定运行阶段,对虫卵囊替代物去除率可以达到96%。