Long-term monitoring of environmental change in German towns through the use of lichens as biological indicators: comparison between the surveys of 1970, 1980, 1985, 1995, 2005 and 2010 in Wetzlar and Giessen

Background

In the years 1970, 1980, 1985, 1995, 2005 and 2010, lichen mapping in the towns of Wetzlar and Giessen in Hesse was performed. The aim was to show the effects of immission load. Despite the application of modified test methods during the study period, the results can still be compared directly because they could be adapted to the requirements of the guidelines of the Association of German Engineers. Even the earlier study results could be interpreted partly within the scope of the guidelines. Parallel to the lichen mapping, comparative examinations of pH on tree bark were carried out.

Results

In both towns, the pH of the tree bark has been increasing continuously, presently almost reaching pre-industrial values. The increase was stronger in Wetzlar than in Giessen. In 1970, the lichen vegetation showed a complete depletion. Since then the number of species has risen significantly. This development happened faster and more intensely in Wetzlar. The comparison of the lichen vegetation between 1970 and 2010 also shows an increased existence of species that are favored by hypertrophic air contaminants. In the 2010 survey, some species considered as being promoted by global warming were found for the first time.

Conclusions

The increase of the bark pH can be explained by the decreasing acid pollution, primarily SO₂. This is also assumed to be the main cause for the increasing number of lichen species. An explanation for Wetzlar's advantage is that the acid pollutants had been neutralized by a local industrial emittent of lime dust. With the reduction of dust emissions in Wetzlar due to the installation of filters, the bark pH in both towns steadily converged in the reference period. An examination of pre-industrial lichen studies shows that in both towns the original state of lichen vegetation has not been restored yet.     

The use of potassium dichromate and ethyl alcohol as blood preservatives for analysis of organochlorine contaminants

The "gold standard" for preserving and shipping of human tissue samples for analysis of organochlorine contaminants is freezing. This method can be difficult, costly if using heavy dry ice for shipping, and often unfeasible, especially in less developed countries where electricity and dry ice are frequently rare or absent. Therefore, it is essential that more convenient and practical methods for preservation of blood samples are found. As an alternative to freezing, there have been studies employing potassium dichromate as a preservative for human or cow's milk or ethyl alcohol preservation of blood for dioxin analysis. In this study, four methods were compared to investigate the effectiveness of ethyl alcohol and potassium dichromate as blood preservatives for analysis of dioxins, dibenzofuran, and polychlorinated biphenyl (PCB) congeners. Samples of whole blood from a Dallas, Texas hospital were collected and pooled. Freezing, ethyl alcohol in two concentrations (20% and 40% per volume of sample), and potassium dichromate were used for blood preservation. The blood samples containing potassium dichromate or ethyl alcohol were stored and sent to ERGO laboratory for dioxin analysis and comparison with results from the frozen sample, which was kept frozen at all times until analyzed. This study suggests that potassium dichromate is a suitable alternative to freezing for preservation of whole blood for dioxin, dibenzofuran, and PCB measurements when either lipid or wet weight based results are reported. Potassium dichromate tablets were very easy and convenient to use--two 100 mg tablets (with a dichromate content of about 33 mg each) were added to each bottle containing 65 ml of blood. However, ethyl alcohol at 20% and 40% concentration under the conditions of this pilot study and the analytical method employed did not appear to provide satisfactory preservation when lipid based results are given or when the fat content has to be determined (wet or whole weight). Further research with a larger number of samples, inclusion also of other groups of persistent organic pollutants such as organochlorine pesticides or brominated flame retardants, a longer duration of storage time, and at temperatures greater than US or German room temperature is indicated in order to recommend the routine use of potassium dichromate as preservative for whole blood intended for dioxin, dibenzofuran, and PCB analysis.     

Comparison of selected aerobic and anaerobic procedures for MSW treatment

This paper considers selected efficiency rates and process data of aerobic and anaerobic procedures for the treatment of municipal solid waste and residual waste. Data are exclusively related to mechanical-biological treatment (MBT) procedures for generating waste appropriate for landfilling. The following aspects are regarded: general framework conditions for the application of MBT, efficiency of decomposition and of stabilisation, air and water emissions and energy balances. The presented data can be used for more efficient planning. In comparison to aerobic processes, anaerobic digestion can be ecologically advantageous, particularly with regard to exhaust emissions and energy balances. On the other hand, the wastewater emissions and the wastewater treatment required must be regarded as disadvantageous. Due to the relatively short period of operational history of most anaerobic processes for mechanical-biological waste treatment and thus limited experiences, operational reliability of anaerobic processes is slightly lower. Extensive biological stability of the treated waste for low-emission disposal cannot be reached by anaerobic digestion alone, but only in combination with additional aerobic post-treatment. In connection with the utilisation of renewable energies and the rising relevancy of climate protection, it can be affirmed that anaerobic digestion for the treatment of municipal solid waste has a high potential for further development.     

The advantages of accelerator-based radiocarbon measurements in geophysical research

This paper reviews methods for carbon-14 dating using accelerators. ¹⁴C is accelerated to high energies. Subsequently ¹⁴C is separated from ¹⁴N by passing it through a xenon gas cell or electrostatic separator. Advantages, limits and applications of the techniques are discussed.     

Man-made and natural smog in California

The radiocarbon content in creosote bush in the greater Los Angeles area has been found to reflect the distribution of smog. Indications are that smog in the even larger air basin of the San Joaquin Valley of California may be caused in part by recent biospheric emissions rather than by fossil fuel combustion alone.     

Standardized and simplified life-cycle assessment (LCA) as a driver for more sustainable biofuels

The assessment of environmental impacts along the life cycle of biofuels is a complex and resource-demanding task that cannot be afforded by small producers in developing countries. Therefore, certification schemes bear the risk that small and independent producers will be locked out and the market for sustainable biofuels will be dominated by international investors and large-scale plantations. However, many environmental impacts of various production chains of biofuels and feedstocks are already known. This knowledge has been used to create a web-based questionnaire for a “Sustainability Quick Check for Biofuels” (SQCB, http://www.sqcb.org). SQCB reduces the need for user entries to the most relevant and best-known parameters of the biofuel production chain. Based on this user input, a specific inventory is automatically modelled and linked to background data. SQCB then calculates the environmental impact assessment and checks the results against sustainability criteria. Since the results are calculated immediately, key environmental factors can be interactively analyzed. One major goal of the SQCB is to support the market entrance for local biofuel producers, given that strengthening local stakeholders is a key driver for empowering rural communities in development countries.     

Diet of the extinct Lava mouse <Emphasis Type="Italic">Malpaisomys insularis</Emphasis> from the Canary Islands: insights from dental microwear

Malpaisomys insularis is a mouse-like rodent endemic to the eastern Canary Islands. It became extinct during the fourteenth century. It was a remarkable species living under hyperarid conditions. A dental microwear analysis was performed in order to determine its former diet. The elevated number of fine scratches found in Malpaisomys molars suggests that it consumed a significant part of Poaceae, grass consumption leaving the most distinctive features on dental wear facets. A graminivorous diet with a high amount of abrasive items is in agreement with the broad teeth of Malpaisomys, considered as adapted to grass consumption. However, in the absence of potential competitors over its native range, it is likely that Malpaisomys also foraged on dicots to meet higher nutrient and energetic requirements. The ecology of Malpaisomys is discussed from these results in the context of the desertic climatic conditions of the eastern Canary Islands and with a special concern on its small body size in contrast to other large-sized island murine species such as the giant rats of the central Canary Islands.     

Employment and structural impacts of material efficiency strategies: results from five case studies

In order to come up with a sound assessment of the effects of material efficiency innovations on growth, employment and competitiveness, different economic mechanisms have to be considered. From a methodological point of view, the analysis must be able to account for technology specific aspects. The employment impacts of five innovations are analyzed: plastic and paper recycling, increased life span of automobiles, car sharing, and bio-based products. Time horizons for all strategies are scenarios until 2020.The economic impacts are context specific with regard to innovation, technology and country. The economic impacts highlight substantial structural adjustments. The overall economic net impact on employment tends to be neutral to positive. Stronger positive economic impacts result if first mover advantages can be established.     

Cognitive processes in procedural justice judgments: The role of ease‐of‐retrieval,uncertainty, and experience

In a field experiment with 517 job applicants, the processes underlying the formation of procedural justice judgments were investigated. It was hypothesized that procedural justice judgments may be based not only on content information (e.g., “What are fair aspects of the selection procedure?”), but also on the felt ease or difficulty with which this content information can be retrieved from memory (ease‐of‐retrieval; e.g., “How easily can I recall fair aspects of the selection procedure?”). Evaluations of the company's online application procedure show that job candidates based procedural justice judgments on content information or on ease‐of‐retrieval, depending on their uncertainty regarding the online application procedure as well as their prior experiences with online applications. Specifically, experienced applicants who felt certain based their judgments on ease‐of‐retrieval, whereas all other applicants based their judgments on content information. Implications for research on the formation of justice judgments as well as practical applications are discussed. Copyright © 2010 John Wiley & Sons, Ltd.