Magnetic mapping of fly-ash pollution and heavy metals from soil samples around a point source in a dry tropical environment

The Singrauli region in the southeastern part of Uttar Pradesh, India is one of the most polluted industrial sites of Asia. It encompasses 11 open cast coalmines and six thermal power stations that generate about 7,500 MW (about 10% of India’s installed generation capacity) electricity. Thermal power plants represent the main source of pollution in this region, emitting six million tonnes of fly-ash per annum. Fly-ash is deposited on soils over a large area surrounding thermal power plants. Fly-ashes have high surface concentrations of several toxic elements (heavy metals) and high atmospheric mobility. Fly ash is produced through high-temperature combustion of fossil fuel rich in ferromagnetic minerals. These contaminants can be identified using rock-magnetic methods. Magnetic susceptibility is directly linked to the concentration of ferromagnetic minerals, primarily high values of magnetite. In this study, magnetic susceptibility of top soil samples collected from surrounding areas of a bituminous-coal-fired power plant were measured to identify areas of high emission levels and to chart the spatial distribution of airborne solid particles. Sites close to the power plant have shown higher values of susceptibility that decreases with increasing distance from the source. A significant correlation between magnetic susceptibility and heavy metal content in soils is found. A comparison of the spatial distribution of magnetic susceptibility with heavy-metal concentrations in soil samples suggests that magnetic measurements can be used as a rapid and inexpensive method for proxy mapping of air borne pollution due to industrial activity.     

Application of Defined Co-Immobilized Microbial Consortium as a Ready-to-Use Seed Inoculum in Bod Analysis

A number of microorganisms were isolated from sewage. Biochemical Oxygen Demand (BOD-5 day) analysis was carried out by individual pure cultures. The cultures giving higher or equal BOD values as compared to reference GGA solution were selected for the formulation of a defined mixed microbial consortium. This microbial consortium was co-immobilized on calcium-alginate beads. Four synthetic and six industrial samples were tested for BOD by using immobilized beads as well as sewage as source of seeding materials. BOD values obtained with beads for all the synthetic as well as industrial samples were fairly comparable with those obtained with sewage. Reusability of prepared microbial beads was also checked with different synthetic and industrial samples and was compared with reference GGA solution. The same microbial beads can be reused three times for different BOD-5 day estimations. It is recommended that immobilized microbial beads can be used as a ready-to-use seeding material for BOD analysis.     

Atmospheric deposition of heavy metals (Cu, Zn, Cd and Pb) in Varanasi City, India

Rapid growth in urbanization and industrialization in developing countries may significantly contribute in heavy metal contamination of vegetables through atmospheric depositions. In the present study, an assessment was made to investigate the spatial and seasonal variations in deposition rates of heavy metals and its contribution to contamination of palak (Beta vulgaris). Samples of bulk atmospheric deposits and Beta vulgaris for analysis of Cu, Zn, Cd and Pb were collected from different sampling locations differing in traffic density and land use patterns. The results showed that the sampling locations situated in industrial or commercial areas with heavy traffic load showed significantly elevated levels of Cu, Zn and Cd deposition rate as compared to those situated in residential areas with low traffic load. The deposition rates of Cu, Zn and Cd were significantly higher in summer and winter as compared to rainy season, however, Pb deposition rate was significantly higher in rainy and summer seasons as compared to winter season. Atmospheric depositions have significantly elevated the levels of heavy metals in B. vulgaris collected during evening as compared to those collected in morning hours. The study further showed that local population has maximum exposure to Cd contamination through consumption of B. vulgaris. The present study clearly points out the urban and industrial activities of a city have potential to elevate the levels of heavy metals in the atmospheric deposits, which may consequently contaminate the food chain and thus posing health risk to the local population.     

Biochemical responses in tree foliage exposed to coal-fired power plant emission in seasonally dry tropical environment

A biomonitoring study was conducted to investigate the responses of plants exposed to power plant emission in a dry tropical environment. For this purpose, five sampling sites were selected in the prevailing wind direction (NE) at different distance to thermal power plant (TPP) within 8.0 km range and a reference site was selected in eastern direction at a distance of 22.0 km. The two most common tree species, Ficus benghalensis L. (Evergreen tree) and Dalbergia sisso Roxb. (deciduous tree) were selected as test plants. Ambient sulphur dioxide (SO(2)), nitrogen dioxide (NO(2)), suspended particulate matter (SPM), respirable suspended particulate matter (RSPM), dust-fall rate (DFR) and plant responses such as leaf pigments (chlorophyll a, chlorophyll b and carotenoids), ascorbic acid, sugar and sulphate-sulphur (SO4(2-)-S) contents were measured. Ambient SO(2), NO(2), SPM, RSPM and DFR showed significant spatial and temporal variation at different sites. Considerable reduction in pigment (chlorophyll a, chlorophyll b and carotenoids) and sugar contents were observed at sites receiving higher pollution load. Ascorbic acid exhibited significant positive correlation with pollution load. Accumulation of SO4(2-)-S in leaf tissue showed significant positive correlation with ambient SO(2) concentration at all the sites. At the same time, SO4(2-)-S showed significant negative correlation with pigment and sugar content. D. sisso Roxb. tree was found to be more sensitive as compared to F. benghalensis L. tree.     

Analysis of some heavy metals in the riverine water, sediments and fish from river Ganges at Allahabad

The river Ganges has been one of the major recipients of industrial effluents in India. The present paper deals with the study related to occurrence and bioaccumulation of heavy metals (Cu, Cr, Cd, Pb, Zn) in the riverine water, sediment, and the muscles of two cat fish species, Channa punctatus (C. punctatus) and Aorichthys aor (A. aor) procured from the river Ganges at Allahabad. The data obtained after water analysis reflected the order of occurrence of heavy metals to be Zn > Pb > Cu > Cr > Cd, respectively. The analysis of heavy metals in sediment indicated that among the five heavy metals tested; Zn was maximally accumulated followed by Pb, Cr, Cu and Cd. The trend of heavy metals accumulation in fish muscles was found to be similar to that observed in sediment and water such as Zn > Pb > Cu > Cr > Cd. Data indicated that Zn accumulated maximally in the sediment as well as muscles of both of the fish species in comparison to other metals.     

Kinetics of sorption of lead on bed sediments of River Hindon, India

A number of low cost waste sorbent have been used for removal of heavy metals, however, few studies have been carried out on the sorption process on riverbed sediments in their natural state of occurrence. Stream sediments adsorb certain solutes from streams, thereby significantly changing the solute composition, but little is known about quantitatively describing sorption phenomena and rates of these processes. In the present investigation, sorption of lead ions on river bed sediments of river Hindon, a tributary of river Yamuna, India has been studied to demonstrate the role of bed sediments in controlling metal pollution. The effect of various operating variables, viz., initial concentration, solution pH, sediment dose, contact time and particle size has been studied. The sorption of lead ions increased with respect to pH and sorbent dose and decreased with sorbent particle size. Two important geochemical phases, iron and manganese oxide, also play important role in the sorption process. The sorption data were analysed using Langmuir and Freundlich isotherm models to determine the mechanistic parameters related to the sorption process. Further, although lead ions have more affinity for the fine fraction of the sediment, but the overall contribution of coarser fraction to sorption is more as compared to clay and silt fraction. The kinetic data suggest that the sorption of lead on bed sediments is an endothermic process, which is spontaneous at low temperature. The uptake of lead is controlled by both bulk and intraparticle diffusion mechanism.     

Fluoride occurrence and assessment of exposure dose of fluoride in shallow aquifers of Makur, Unnao district Uttar Pradesh, India

The water samples from the shallow aquifers of Makur, Unnao district, Uttar Pradesh, was analyzed for fluoride content (F( - )) and other water quality parameters such as pH, EC, CO(3) (2-), HCO(3) (-), Cl( - ), Na( + ), Ca(2 + ), Mg(2 + ) and RSC. It was found that the F( - ) concentration of water varied between 1.05 to 13.9 mgl( - 1) which exceeded the maximum desirable limits of 1.0 mgl( - 1) of F( - ) as laid down by BIS and 68% of water exceeded maximum permissible limits of 1.5 mgl( - 1) as prescribed by WHO. The correlation study of fluoride indicated that F( - ) has a significant (p < 0.05) positive relationship with pH (r = +0.59) and RSC (r = 0.54), while a significant negative correlation with Ca+Mg (r = -0.53) and Mg (r = -0.49). The exposure doses of fluoride in infants was found between 0.35 to 3.26 mg kg( - 1)day( - 1) (if dug well water was used) whereas 0.36 to 4.63 mg kg( - 1)day( - 1) (when shallow hand pumps) The exposure doses of water in case of children (20 kg body weight) varied between 0.157 to 1.47 mg kg( - 1)day( - 1) (for dugwell) and 0.162 to 2.08 mg kg( - 1)day( - 1) (for shallow hand pumps) whereas in case of adults (70 kg body weight), it varied between 0.09 to 0.839 mg kg( - 1)day( - 1) (for dugwell) and 0.092 to 1.19 mg kg( - 1)day( - 1) (shallow hand pumps) which is quite high against the standard value of 0.05 mg/kg/day which is the minimum risk level (MRL) calculated by the Agency for Toxic Substances and Disease Registry (ATSDR). The maximum exposure dose to fluoride for adults in the study area found to be 23.8 times higher than the ATSDR's MRL.     

Fluoride, boron and nitrate toxicity in ground water of northwest Rajasthan, India

The study was carried out to access the fluoride, boron, and nitrate concentrations in ground water samples of different villages in Indira Gandhi, Bhakra, and Gang canal catchment area of northwest Rajasthan, India. Rural population, in the study site, is using groundwater for drinking and irrigation purposes, without any quality test of water. All water samples (including canal water) were contaminated with fluoride. Fluoride, boron, and nitrate were observed in the ranges of 0.50–8.50, 0.0–7.73, and 0.0–278.68 mg/l, respectively. Most of the water samples were in the categories of fluoride 1.50 mg/l, of boron 2.0–4.0 mg/l, and of nitrate <?45 mg/l. There was no industrial pollution in the study site; hence, availability of these compounds in groundwater was due to natural reasons and by the use of chemical fertilizers.     

Fluoride and health hazards: community perception in a fluorotic area of central Rajasthan (India): an arid environment

India is among the 23 nations around the globe where health problems occur due to excess ingestion of fluoride (>1.5 mg/l) by drinking water. In Rajasthan, 18 out of 32 districts are fluorotic and 11 million of the populations are at risk. An exploratory qualitative survey was conducted to describe perception of the community regarding fluoride and related health problems in Central Rajasthan. A study on distribution and health hazards by fluoride contaminate in groundwater was performed in 1,030 villages of Bhilwara district of Central Rajasthan. One thousand thirty water samples were collected and analyzed for fluoride concentration. Fluoride concentration in these villages varies from 0.2 to 13.0 mg/l. Seven hundred fifty-six (73.4%) villages have fluoride concentration above 1.0 mg/l. Sixty (5.83%) villages have fluoride concentration above 5.0 mg/l with maximum numbers (24, 19.5%) from Shahpura tehsil. A detailed fluorosis study was carried out in 41 villages out of 60 villages having fluoride above 5.0 mg/l in the study age, sex, and occupation data were also collected. Four thousand, two hundred fifty-two individuals above 5 years age were examined for the evidence of dental fluorosis, while 1998 individuals above 21 years were examined for the evidence of skeletal fluorosis. The overall prevalence of dental and skeletal fluorosis was found to be 3,270/4,252 (76.9%) and 949/1,998 (47.5%), respectively. Maximum of 23.9% (1,016) individuals have mild grade of Dean’s classification. Three hundred seventy-four (8.8%) individuals have severe type of dental fluorosis. The Dean’s Community Fluorosis Index for the studied area in total is 1.62. Maximum CFI 3.0 was recorded from Surajpura of Banera Tehsil. Five hundred sixty-six (28.3%) individuals have Grade I type of skeletal fluorosis while only 0.6% (12) individuals have Grade III skeletal fluorosis. In conclusion, the prevalence and severity of fluorosis increased with increasing fluoride concentration. It was interesting to note that in some villages, the prevalence and severity of fluorosis were highest in subjects belonging to the economically poor community. Similarly, male laborers showed highest prevalence of fluorosis. Prevalence and severity of fluorosis were observed higher in subjects using tobacco, bettle nuts, and alcoholic drinks. In contrast, subjects using citrus fruits and having good nutritional status showed low prevalence.     

Seasonal air quality profile of inorganic ionic composition of PM10 near Taj Mahal in Agra, India

Atmospheric aerosols and their impacts on the environment particularly on human health is an issue of significant public and governmental concern. Though studies on air quality related to total suspended particulate matter have done by various authors in India, yet respirable suspended particulate matter (PM₁₀) is not characterized so far particularly in a historical and world heritage city like Agra. This study presents seasonal variation in mass levels of PM₁₀ and its ionic composition. PM₁₀ samples were collected in the proximity of Taj Mahal and subjected to chemical analysis using ion chromatography technique. The preliminary findings reveal that the 24-h average of PM₁₀ mass level varies from 115 to 233, 155 to 321, and 33 to 178 μg/m³, respectively, in summer, winter, and rainy seasons indicating critical pollution situation. These values are very much higher than the National Ambient Air Quality Standards of 75 μg/m³ (prescribed by Central Pollution Control Board, India) in both of summer and winter seasons whereas quite near the permissible limits in rainy season. The equivalent ratios of NH₄ ⁺ to nonsea salt SO₄ ^2? and NO₃ ^? and ∑Cations to ∑Anios were found to be greater than unity indicating high source strength of ammonia and alkaline nature of aerosols. The study suggests the need for continuous and long-term systematical sampling and detailed physiochemical analysis of PM₁₀ and also to know the characteristics of PM in background areas for better understanding of the emission sources.