Presence of Torque Teno Virus (TTV) in Tap Water in Public Schools from Southern Brazil

Torque teno virus (TTV) was surveyed in tap water collected in schools from three municipalities located in the south of Brazil. TTV genomes were found in 11.7 % (4/34) of the samples. TTV DNA was detected in 10.5 % (2/19) of the samples collected at the city of Caxias do Sul and in 25 % (2/8) of the samples from Pelotas. Those cities have a low rate of sewage treatment. All samples from Santa Cruz do Sul, which has nearly 92 % of its sewage treated, were negative. These results suggest that the amount of sewage treated may have an effect on the detection rates of TTV DNA in drinking water in a given urban area, showing a mild negative correlation (r = ?0.76), when comparing the percentage of sewage treatment to the detection of TTV genomes. The detection rate of TTV was also compared with Escherichia coli, showing a strong correlation (r = 0.97), indicating that TTV may be a suitable marker of fecal contamination.     

Dimensional analysis and scaling in mechanical mixing for fabrication of metal matrix nanocomposites

For a successful enhancement of mechanical properties of metal matrix nanocomposites, a homogeneous nanoparticle dispersion and distribution in the solidified metal is required. Mechanical mixing can be used for initial break-up of agglomerates, and its study can be simplified with dimensional analysis. Using this technique, mixing time and vortex height were assessed while varying fluid properties, impeller angle, and angular speed. Three relevant dimensionless numbers were recognized: the Reynolds (Re), Froude and Galilei (Ga) numbers. Based on blade and impeller shaft angles, a modified Froude number (Fr*) was defined. These parameters were calculated experimentally, varying angular speed from 200 to 1000 rpm for three different impeller angles: 0°, 15° and 30°. This procedure was performed with three fluids: water, and two aqueous glycerin solutions (25% and 50% by volume). Digital images were taken and processed to measure vortex height. Mixing time was measured for water at 0° impeller angle, angular speed ranging from 200 to 1200 rpm. Results showed an optimal dimensionless mixing time with respect to Re. A linear relationship was found between dimensionless vortex height and Fr*. The first had a second order polynomial relationship with the product ReFr*, regardless of impeller angle. This relationship, together with the Ga, specific for each fluid, allows scaling the results to other fluids such as molten pure aluminum. This study allows experimenting in simpler systems that involve transparent fluids, room temperature and low cost, to then elaborate a prediction of vortex height in fluids where measurements are difficult and costly, such as molten metals.     

Influence of overlap between the laser beam tracks on surface quality in laser polishing of AISI H13 tool steel

Polishing by laser beam radiation is a novel manufacturing process to modify the initial surface topography in order to achieve a desired level of surface finish. The performance of laser polishing (LP) is determined by an optimum combination of several key process parameters. In this regard, the overlap between two successive laser beam tracks is one of the important LP process parameters, which has a significant effect over the final surface quality. In the current study, influence of overlap between the laser beam tracks on surface quality was experimentally investigated during the laser polishing of AISI H13 tool steel. Surface areas were polished by using four different overlap percentages (e.g. 80%, 90%, 95%, and 97.5%) while applying the same energy density. The improvement of surface quality was estimated through the analysis of line profiling surface roughness R_a, areal topography surface roughness S_a, and material ratio function. Also, individual components of the surface quality, e.g. waviness and roughness, and their evolution during LP were statistically analyzed using the power spectral density and the transfer functions. Finally, as an example of the best achieved LP result, flat surface area was polished using optimum set of the process parameters improving surface quality by 86.7% through the reduction of an areal topography surface roughness S_a from 1.35 μm to 0.18 μm.     

Analysis of machined surface quality in a single-pass of ball-end milling on Inconel 718

The ball-end milling process is widely used for generating three-dimensional sculptured surfaces with definite curvature. In such cases, variation of surface properties along the machined surface curvatures is not well understood. Therefore, this paper reports the effect of machining parameters on the quality of surface obtained in a single-pass of a ball-end milling cutter with varying chip cross-sectional area. This situation is analogous to generation of free form cavities, pockets, and round fillets on mould surfaces. The machined surfaces show formation of distinct bands as a function of instantaneous machining parameters along the periphery of cutting tool edge, chip compression and instantaneous shear angle. A distinct variation is also observed in the measured values of surface roughness and micro-hardness in these regions. The maximum surface roughness is observed near the tool tip region on the machined surface. The minimum surface roughness is obtained in the stable cutting zone and it increases towards the periphery of the cutter. Similar segmentation was observed on the deformed chips, which could be correlated with the width of bands on the machined surfaces. The sub-surface quality analysis in terms of micro-hardness helped define machining affected zone (MAZ). The parametric effects on the machining induced shear and residual stresses have also been evaluated.     

Incorporating stakeholder decision support needs into an integrated regional Earth system model

A new modeling effort exploring the opportunities, constraints, and interactions between mitigation and adaptation at regional scale is utilizing stakeholder engagement in an innovative approach to guide model development and demonstration, including uncertainty characterization, to effectively inform regional decision making. This project, the integrated Regional Earth System Model (iRESM), employs structured stakeholder interactions and literature reviews to identify the most relevant adaptation and mitigation alternatives and decision criteria for each regional application of the framework. The information is used to identify important model capabilities and to provide a focus for numerical experiments. This paper presents the stakeholder research results from the first iRESM pilot region. The pilot region includes the Great Lakes Basin in the Midwest portion of the United States as well as other contiguous states. This geographic area (14 states in total) permits cohesive modeling of hydrologic systems while also providing strong gradients in climate, demography, land cover/land use, and energy supply and demand. The results from the stakeholder research indicate that, for this region, iRESM should prioritize addressing adaptation alternatives in the water resources, urban infrastructure, and agriculture sectors, including water conservation, expanded water quality monitoring, altered reservoir releases, lowered water intakes, urban infrastructure upgrades, increased electric power reserves in urban areas, and land use management/crop selection changes. For mitigation in this region, the stakeholder research implies that iRESM should focus on policies affecting the penetration of renewable energy technologies, and the costs and effectiveness of energy efficiency, bioenergy production, wind energy, and carbon capture and sequestration.     

Opportunities to reduce greenhouse gas emissions from households in Nigeria

Efforts to mitigate climate threats should not exclude the household as the household is a major driver of greenhouse gas (GHG) emissions through its consumption patterns. This paper derives an emission index that could be used to estimate inventories of carbon dioxide (CO₂) emissions from kerosene combustion for lighting in Nigeria and also looks at the implications of solar pv lighting replacing kerosene lamp in Nigeria. Findings indicate that (1) average CO₂ emissions from kerosene combustion for lighting in Nigeria is about 0.06 kg per hour per lamp, which can be taken as the kerosene lamp CO₂ emission index for Nigeria. (2) about 3 × 10W_p solar pv will be required to replace a kerosene lamp, while about 0.124 tonnes of CO₂ will be avoided per lamp per year, operating at 6 h daily. At the national level, under the kerosene lamp replacement projection assumptions made, between 0.4 and 1.0 million tonnes of CO₂ will be avoided per year. The household investment required to owe a solar pv, including the capital cost of switching from kerosene lamp, is about US356, while the national capital investment outlay is between 1,138.265 and US356, while the national capital investment outlay is between 1,138.265 and US2,848 million. (3) Certified Emission Reduction (CER) units, assuming CO₂ is traded, will generate significant annual revenues on the order of 6.96 to almost US17.4 million per year, while earnings from unspent household kerosene fuel could amount to between 2,520 and US17.4 million per year, while earnings from unspent household kerosene fuel could amount to between 2,520 and US6,300 million over the life span of the solar pv. The micro-economic assessment carried out indicates the non-attractiveness of solar pv use at the household level, and (4) to promote solar pv use, both long and short term policy measures that aim at cost reduction were suggested. The paper concludes that, factoring the suggested measures into the climate, energy, and financial policy decision discourse in Nigeria could empower the households to play a significant role in achieving global CO₂ emission reduction, but at the local level.     

Prompting safety-belt use in the context of a belt-use law: the flash-for life revisited

PROBLEM: Safety-belt use reduces motor vehicle crash-related morbidity and mortality, yet an estimated 18% of drivers do not consistently buckle up (NHTSA, 2005). In 1985, Geller and colleagues developed an interpersonal Flash-for-Life prompt that increased belt use among 22% of 1,087 unbuckled drivers (Geller, Bruff, & Nimmer, 1985). METHOD: The Flash-for-Life intervention was re-introduced at a large university with high safety-belt use (i.e., 80%). College students stood at parking-lot entrance/exits and "flashed" signs with the message, "Please Buckle Up, I Care" to unbuckled drivers. RESULTS: Of 427 unbuckled drivers observed, 30% of these complied with the prompt. Male drivers were significantly more likely to comply with prompts delivered by females. DISCUSSION: Compliance was higher than in the 1985 study, indicating a high baseline rate of safety-belt use does not negate potential beneficial influence of a prompting intervention. This intervention is particularly effective with college-aged males, a sub-group of the driving population least likely to buckle-up. IMPACT ON INDUSTRY: A simple behavioral prompt could be used at most industrial complexes to increase safety-belt use among vehicle occupants who are not buckled-up.     

The theory of planned behavior as mediator of the effect of parental supervision: a study of intentions to violate driving rules in a representative sample of adolescents

INTRODUCTION: The study reported here was designed to test the ability of the theory of planned behavior to mediate the effect of parental supervision on adolescents' intentions to violate driving rules. METHOD: A representative sample of 1,654 adolescents completed questionnaires during individual and anonymous interviews carried out at their schools. RESULTS: Results showed that age, gender, prior risky driving-behavior, and parental supervision significantly predict intentions to violate driving rules. Attitude and the subjective norm partially mediate the effect of age, prior behavior, and parental supervision. Perceived behavioral control does not predict intention and is not predicted by other variables. IMPACT: The results suggest that social cognitive variables partially mediate the effect of parenting practices such as supervision.     

Time allocation between work and recreation and the associated injury risks among young people

PROBLEM: The purpose of this study was to examine the relationship between overall risk of injury and time use patterns between work and active recreation among adolescents and young adults. METHODS: Using a representative sample of 9,795 Canadians aged 15-24 years, a multivariate logistic regression on the likelihood of any medically attended injury was conducted, including sociodemographic, individual, and time factors. RESULTS: Young people who engaged in a combination of high work and high activity hours were twice as likely to sustain a medically attended injury compared to those who worked low hours, but did not participate in any recreational activity. Those respondents who were not in school had a 43% increase in injury risk compared to full-time students. SUMMARY: Our findings suggest that injury risk was not a simple function of fatigue and cumulative exposure time. Our findings suggest the importance of considering time use and the associated injury risk tradeoffs. IMPACT ON INDUSTRY: Relevant to state and federal work safety policy makers, our findings suggest the importance of understanding where youth might otherwise spend their time if constraint were placed on their employment opportunities, and the associated injury risk tradeoffs must be taken into consideration.     

A juvenile lizard specimen with well-preserved skin impressions from the Upper Jurassic/Lower Cretaceous of Daohugou, Inner Mongolia, China

Lizards are now relatively well known from the Yixian Formation of northeastern China. In this study, we describe a juvenile lizard from a fossil horizon at Daohugou, Inner Mongolia. These beds predate the Yixian Formation, and are probably Late Jurassic or earliest Cretaceous in age. The new specimen thus documents the first lizard material from the Daohugou locality and is the earliest lizard skeleton from China. Comparisons with developmental stages of modern lizards suggest the Daohugou lizard is a hatchling. Although tiny, the specimen is notable in preserving exquisite skin impressions showing the variation in scalation across the body, the shape and position of the cloacal outlet, and details of the manus and pes. These are the earliest recorded lepidosaurian skin traces. In its general proportions and the possession of paired frontals, the small Daohugou lizard resembles both the Yixian taxon Yabeinosaurus tenuis and the questionable Jeholacerta formosa, but it differs from the latter in scalation and, based on other characters, may be distinct from both.