Predominance of BDE-209 and other higher brominated diphenyl ethers in eggs of white stork (Ciconia ciconia) colonies from Spain

Polybrominated diphenyl ethers (PBDEs) are ubiquitous pollutants for which there is still a lack of knowledge about the environmental behavior and fate of the higher brominated congeners (octa- to deca-BDEs). In this study, the PBDE content and congener profiles in failed eggs from two colonies of white stork (Ciconia ciconia) in Spain were studied. The average total PBDE concentration was 1.64ng/g (wet weight, w.w.) for the rural colony and 9.08ng/g (w.w.) for the urban colony. Higher brominated BDEs dominated the congener profiles of both colonies. Of particular interest was the determination of BDE-209 as the dominant congener accounting for 44.1% and 38.6% of the total PBDE content in the rural and urban colonies, respectively. BDE-202, considered an indicator of BDE 209 debromination, was detected in 83% and all of the samples from rural and urban colonies, respectively. The observed congener profile in which BDE-207>BDE-208>BDE-206 does not correspond to any known technical PBDE mixture and is evidence for possible BDE-209 degradation.     

Zero valent iron mediated degradation of the pharmaceutical diazepam

Parameters that influence the zero valent iron mediated degradation of the pharmaceutical diazepam (DZP) were evaluated including the iron concentration and its pre-treatment, the effect of complexation with EDTA and oxic versus anoxic condition. It was observed that acid pre-treatment of iron particles is important for degradation efficiency and that H₂SO₄ is a better choice than HCl, resulting in higher degradation of DZP. Under oxic conditions, the degradation of DZP achieved 96% after 60 min using Fe⁰ (25 g L⁻¹) pre-treated with H₂SO₄ in the presence of EDTA (119 mg L⁻¹), while mineralization achieved around 60% after the same time. Under anoxic conditions, degradation occurred, however at lower extent, achieving 67% after 120 min. The addition of EDTA improved the treatment efficiency in 20% leading to 99% DZP degradation after 120 min. The first intermediates formed during DZP degradation were identified using LC/MS analysis and revealed the formation of mono- and di-hydroxylated products from DZP during Fe⁰/EDTA/O₂ degradation, which evidences that OH was the main oxidizing species formed in this process.     

The influence of a real job on upper limb performance in motor skill tests: which abilities are transferred?

To investigate whether the specificities of real jobs create distinctions in the performance of workers in different motor tests for the upper limbs, 24 participants were divided into two groups according to their specific job: fine and repetitive tasks and general tasks. Both groups reproduced tasks related to aiming movements, handling and strength of the upper limbs. There were no significant differences between groups in the dexterity and performance of aiming movements. However, the general tasks group had higher grip strength than the repetitive tasks group, demonstrating differences according to job specificity. The results suggest that a particular motor skill in a specific job cannot improve performance in other tasks with the same motor requirements. The transfer of the fine and gross motor skills from previous experience in a job-specific task is the basis for allocating training and guidance to workers.     

Comparison of the Effect of Plasticizers on PHBV—and Organoclay—Based Biodegradable Polymer Nanocomposites

The aim of this work was to evaluate the effect of different plasticizers on the morphology, crystallization, and mechanical properties of poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV)/organomodified montmorillonite (OMt) nanocomposites. We investigated three different plasticizers: dioctyl phthalate (DOP), a commonly used additive in the polymer industry, and two natural and biodegradable plasticizers: epoxidized soybean oil (ESO) and triethyl citrate (TEC). The nanocomposites with 3 wt% OMt were obtained by melt processing in an internal mixer. The plasticizers were used alone or in combination with clay in a concentration of 10 wt%. X-ray diffraction and scanning electron microscopy results revealed a partially intercalated structure. The degree of crystallinity was higher for all of the samples compared to neat PHBV, although the melting temperature decreased with the use of plasticizers combined with OMt. The impact strength results were dependent on the interaction between the components of the system. Triethyl citrate was the most effective plasticizer due to its more pronounced interaction with the PHBV matrix, which yielded improvements in processing conditions and PHBV’s flexibility and impact properties.     

Arsenic contamination and speciation in surrounding waters of three old cinnabar mines

The impact of arsenic pollution in waters from the surroundings of three abandoned Hg mines in Northern Spain, as well as reaching the Caudal River, was evaluated. For assessing the factors controlling arsenic release, an extensive study based on the physicochemical characterization and multivariate statistical analysis of waters upstream and downstream each mine site was performed. Waters downstream of the La Soterra?a mine present the highest arsenic concentrations, up to 38.8 mg L(-1), coming mainly from the solubilisation of calcium, magnesium and strontium arsenates at a pH close to neutral. Although arsenic concentrations downstream of La Pe?a are markedly lower, these values remain too high, indicating that the encapsulation carried out in this spoil heap is insufficient. In addition, the high water flow in this point involves an extremely high input of arsenic to the surroundings (0.3 g s(-1)). Waters close to tailings from Los Rueldos suffer from acid mine drainage, provoking an important solubilisation of arsenic and heavy metals, a situation which is rapidly softened with distance. The study of arsenic speciation reveals the omnipresence of As(v) in waters from the three mines, whereas in La Pe?a low amounts of As(iii) were also detected. Different preservation methods for As speciation were compared, such as the addition of HCl, EDTA and the storage of samples without any additive, and no alteration of samples in any case up to nine months after the collection was observed. A study of seasonal variations of As and the main parameters affecting its concentration and speciation was completed throughout a year, showing no remarkable dependency with rainfall for any studied variable.     

Dynamics of metal tolerant plant communities' development in mine tailings from the Cartagena-La Unión Mining District (SE Spain) and their interest for further revegetation purposes

Mine tailings are typical elements in post-mining landscapes which usually have high heavy metal contents and are affected by intensive erosion processes, above all in arid and semiarid areas. Revegetation of these sites is considered a low cost and suitable technology to effect surface stabilization. Spontaneous plant communities that colonize tailings in Southern Spain showed different behavior depending on the pH: in neutral tailings the plant communities were formed by less number of plant species than in acid tailings but they had less seasonal variations, showing a stable development. This spontaneous vegetation, that is adapted to metal toxicity and to drought, allows reducing air borne and water erosion, and may mitigate the spread of the contamination to the nearby areas.     

From waste to value-added products: A review of opportunities for fish waste valorization

The fishing industry is responsible for generating large amounts of organic waste rich in compounds of commercial interest. This review aimed to present the state of the art about the possibilities of using solid waste to obtain value-added products. Skins, fins, and scales have been used to obtain gelatin and collagen, a promising compound for use as an additive in yogurts and creams, as well as for the synthesis of biodegradable packaging that, if applicable, can reduce the environmental impact caused by petroleum packaging. Other parts, such as the head and the viscera, contain polyunsaturated fatty acids and other fat-soluble vitamins that have been studied for the production of omega-3 capsules for the pharmaceutical industry, but when the extracted oil does not fit the feeding parameters, it can be applied for the production of biodiesel. Furthermore, fishes are a promising source of astaxanthin, a carotenoid with high antioxidant properties. The use of combined techniques such as chemical and enzymatic methods can increase the extraction yield and favor the obtaining of more purified compounds, in addition to promoting the reduction of chemicals that are aggressive to the environment. In general, conscious production in the fishing industry through the valorization of waste generated for use as inputs for other value chains encompasses aspects of the circular economy, which can positively impact several Sustainable Development Goals.     

Aspergillus sclerotiorum lipolytic activity and its application in bioremediation of high-fat dairy wastewater environments

Oils and grease (O&G) have low affinity for water and represent a class of pollutants present in the dairy industry. Enzyme-mediated bioremediation using biocatalysts, such as lipases, has shown promising potential in biotechnology, as they are versatile catalysts with high enantioselectivity and regioselectivity and easy availability, being considered a clean technology (white biotechnology). Specially in the treatment of effluents from dairy industries, these enzymes are of particular importance as they specifically hydrolyze O&G. In this context, the objective of this work is to prospect filamentous fungi with the ability to synthesize lipases for application in a high-fat dairy wastewater environment. We identified and characterized the fungal species Aspergillus sclerotiorum as a good lipase producer. Specifically, we observed highest lipolytic activity (20.72 U g⁻¹) after 96 h of fermentation using sunflower seed as substrate. The fungal solid fermented was used in the bioremediation in dairy effluent to reduce O&G. The experiment was done in kinetic from 24 to 168 h and reduced over 90% of the O&G present in the sample after 168 h. Collectively, our work demonstrated the efficiency and applicability of fungal fermented solids in bioremediation and how this process can contribute to a more sustainable wastewater pretreatment, reducing the generation of effluents produced by dairy industries.

     

Home composting versus industrial composting: Influence of composting system on compost quality with focus on compost stability

Stability is one of the most important properties of compost obtained from the organic fraction of municipal solid wastes. This property is essential for the application of compost to land to avoid further field degradation and emissions of odors, among others. In this study, a massive characterization of compost samples from both home producers and industrial facilities is presented. Results are analyzed in terms of chemical and respiration characterizations, the latter representing the stability of the compost. Results are also analyzed in terms of statistical validation. The main conclusion from this work is that home composting, when properly conducted, can achieve excellent levels of stability, whereas industrial compost produced in the studied facilities can also present a high stability, although an important dispersion is found in these composts. The study also highlights the importance of respiration techniques to have a reliable characterization of compost quality, while the chemical characterization does not provide enough information to have a complete picture of a compost sample.     

Preliminary data suggest that venlafaxine environmental concentrations could be toxic to plants

Venlafaxine hydrochloride is a structurally novel antidepressant. Its occurrence in surface waters and drinking water has only been reported in recent works. The aim of this work is to assess the acute and chronic sublethal toxicity of venlafaxine in relevant taxa of riparian ecosystems. We used the fern Polystichum setiferum during the critical life stage of development. Reliable biomarkers of cell viability (mitochondrial activity), plant physiology (chlorophyll), and growth (DNA content) were assessed as sensitive endpoints of toxicity. About DNA quantification, our results show that venlafaxine induces acute lethal phytotoxicity at 24 and 48 h (LOECs 1 μg L^?1 and 0.1 μg L^?1, respectively). At 24 h, hormetic effects in spores of P. setiferum mitochondrial activity mask lethality and adverse effects are observed (LOEC 1 μg L^?1). At 48 h a reduction in the mitochondrial activity happens (LOEC 10 μg L^?1). In chronic exposure of 1 week, LOEC for DNA is 0.1 μg L^?1. Mitochondrial activity showed a strong hormetic stimulation of a surviving spore population (LOEC 10 μg L^?1). Changes were not observed in chlorophyll autofluorescence. Environmental concentrations of venlafaxine can be deleterious for the development of significant populations of sensitive individuals in riparian ecosystems.