Short-term changes in mobile dunes at Port Alfred,South Africa

Development along the western beachfront of Port Alfred, which is situated along a sandy shoreline, increased markedly in the 1960s as the coastal town became a popular holiday resort. This development included the removal of coastal vegetation, which resulted in the destabilization of dunes and migration of sand westerly onto the road, West Beach parking lot, and lawns of the cabanas. Sand traps were constructed to collect sand blowing across the dunes over set periods, and the net sand movement along the mobile dune belt was calculated using Hunter's equation. The dunes show an easterly movement of sand at a rate of 3.5 m/yr, which is comparable with figures recorded along other areas of this coastline. Considering the wind regime and amount of sand movement along this coast, it is inappropriate to clear vegetation and develop within the dune region.     

Vacuum pyrolysis process for remediation of hydrocarbon-contaminated soils

A vacuum pyrolysis process was used for the remediation of hydrocarbon–contaminated soils from “Les Vidangeurs de Montréal” site in Mascouche in the province of Québec, near Montréal. Ten samples were tested on a laboratory scale batch reactor, and one sample was tested on a prototype process development unit. The process is simple, efficient, reliable, and economically competitive with other existing technologies. The vacuum pyrolysis process efficiently treated soils contaminated with a variety of pollution levels and types, irrespective of the soil matrix, providing treated soils meeting the A criterion (noncontaminated, residential level) of the Ministry of Environment Québec (MENVIQ). The pyrolytic oil and the noncondensable pyrolytic gases can be used as makeup fuel in the process, because they have a high calorific value and their combustion should not pose any emission problems. The waterphase effluent must be treated before discharge.     

DOMESTIC WASTEWATER TREATMENT BY PEATLANDS IN A NORTHERN CLIMATE: A WATER QUALITY STUDY1

ABSTRACT: The use of peatlands as the main form of wastewater treatment in a northern climate was studied for the James Bay Energy Society. The Fontanges campsite (70° 17′ 30″ W; 54° 34′ 00″ N) was chosen as the study site. In less than 1.5 km from the point of discharge BOD₅, COD, total hardness, inorganic carbon, orthophosphates, total phosphorus, ammonia and total nitrogen were reduced by at least 90 percent. The peatland treatment system studied is divided into four components, each having a specific function. The first part combines the action of microorganisms and adsorption on peat, thus reducing the organic content while increasing the inorganic constituents. The second part uses peat to adsorb the inorganic elements already present in the wastewater and those produced in the first part of the system. The third component acts as an aerator, increasing the dissolved oxygen and decreasing the BOD₅ levels of the water. The fourth part removes most of the remaining nutrients, thus acting like a tertiary treatment. Overall, peatlands seemed to be effective in treating domestic settled wastewater in a cold climate.     

VELOCITY EQUATION FOR WATER QUALITY MODELING IN GEORGIA1

ABSTRACT: Tabletop water quality modeling still plays an important role in the water pollution control activities of the Georgia Environmental Protection Division. Tabletop models are those developed with out the aid of extensive field data. One important component of GEORGIA DOSAG, our basic water quality model, is the equation used to predict flow through velocity. However, Georgia is characterized by wide physiographic diversity which reduces the effectiveness of uncalibrated velocity equations. Using 15 years of accumulated time-of-travel studies, a series of empirical velocity equations were developed and calibrated to various physiographic conditions in Georgia. Equations are available for each major soil province and for three stream flow ranges within each province - Q<100 cfs, 100<Q<1000 cfs, and Q>1000 cfs. Now, in the absence of extensive field data, we have data based velocity equations which can be tailored to each site under study.     

MULTICRITERIA PROGRAMMING OF WATER SUPPLY SYSTEMS FOR RURAL AREAS1

ABSTRACT: The aim of this paper is to present a multicriteria methodology for decision aid at the stage of programming a water supply system (WSS) for a rural area. The programming stage is an intermediate one between planning and designing water supply facilities, and can be decomposed into two problems: (a) setting up a priority order of water users, taking into account socio-economic criteria; and (b) choosing the best technical variant of the WSS. Among the criteria considered for the latter problem, there is a criterion of distance between the socio-economic priorities of users and the precedence orders of users according to the technical programming, which plays a coordinating role between problems (a) and (b). All steps of the presented methodology are illustrated by a real case study.     

WATER RESOURCES AND SOCIAL CHOICES1

ABSTRACT The problem of water resources management can be viewed as one requiring the existence and application of some type of “collective decision” mechanism. Currently, the general water resource decision problem is solved using an “individual decision” format without explicit consideration of the dominant social decision system. This paper demonstrates the need for blending technical planning activities with organized societal processes and then proposes a specific public decision framework to satisfy this requirement. The key element in this planning framework is a generalized “bargaining arena” which serves to link technical activities with the social system. Using this bargaining device we can (1) specify policy at a local level, (2) incorporate “social decision” rules into the planning process, and (3) provide local access to the decision process. A simple case of regional water quality management is used to describe the application of this planning procedure and to offer encouragement for successful use in more complex real-world cases.     

Correlations in the chemical composition of rural background atmospheric aerosol in the UK determined in real time using time-of-flight mass spectrometry

An aerosol time-of-flight mass spectrometer (ATOFMS) was used to determine, in real time, the size and chemical composition of individual particles in the atmosphere at the remote inland site of Eskdalemuir, Scotland. A total of 51,980 particles, in the size range 0.3-7.4 microm, were detected between the 25th and 30th June 2001. Rapid changes in the number density, size and chemical composition of the atmospheric aerosol were observed. These changes are attributed to two distinct types of air mass; a polluted air mass that had passed over the British mainland before reaching Eskdalemuir, interposed between two cleaner air masses that had arrived directly from the sea. Such changes in the background aerosol could clearly be very important to studies of urban aerosols and attempts at source apportionment. The results of an objective method of data analysis are presented. Correlations were sought between the occurrence of: lithium, potassium, rubidium, caesium, beryllium, strontium, barium, ammonium, amines, nitrate, nitrite, boron, mercury, sulfate, phosphate, fluorine, chlorine, bromine, iodine and carbon (both elemental and organic hydrocarbon) in both fine (d < 2.5 microm) and coarse (d > 2.5 microm) particle fractions. Several previously unreported correlations were observed, for instance between the elements lithium, beryllium and boron. The results suggest that about 2 in 3 of all fine particles (by number rather than by mass), and 1 in 2 of all coarse particles containing carbon, consisted of elemental carbon rather than organic hydrocarbon (although a bias in the sensitivity of the ATOFMS could have affected these numbers). The ratio of the number of coarse particles containing nitrate anions to the number of particles containing chloride anions exceeded unity when the air mass had travelled over the British mainland. The analysis also illustrates that an air mass of marine origin that had travelled slowly over agricultural land can accumulate amines and ammonium.     

Application of Decision Analysis to Forest Road Deactivation in Unstable Terrain

Resource managers require objective methodologies to optimize decisions related to forest road deactivation and other aspects of road management, especially in steep terrain, where road-related slope failures inflict extensive environmental damage. Decision analysis represents a systematic framework that clearly identifies real options and critical decision points. This framework links current decisions with expected future outcomes and provides advantages such as a common currency to systematically explore the liability consequences of limited budget expenditures to road deactivation and other road-related activities. Furthermore, the decision framework prevents the analysis from becoming hopelessly entangled by the vast number of possibilities generated by the alternative occurrences, magnitudes, and consequences of landslide/debris flow events and provides the information required for the first step of an adaptive management process. Here, a structured analysis of potential environmental risks for a road deactivation project in coastal British Columbia, Canada is presented. The application of decision analysis generates a ranking of the expected benefits of proposed deactivation activities on various road sections. The ranking distinguishes between road sections that offer high expected benefit from those that offer moderate to low expected benefit. Seventeen of 171, 100–m road segments accounted for 18% of the cumulative cost and 98% of the cumulative expected net benefits from road deactivation. Furthermore, the cost of deactivating a section of road is related to the expected benefit from such deactivation, thus providing the basis for more effective resource allocation and budgeting decisions.     

A two-dimensional model for simulating the transport and fate of toxic chemicals in a stratified reservoir

A two-dimensional reservoir toxics model is essential to establishing effective water resources management and protection. In a reservoir, the fate of a toxic chemical is closely connected with flow regimes and circulation patterns. To better understand the kinetic processes and persistence and predict the dissipation of toxic contaminants in the reservoir during a spill or storm runoff event, a toxics submodel was developed and incorporated into an existing laterally integrated hydrodynamics and transport model. The toxics submodel describes the physical, chemical, and biological processes and predicts unsteady vertical and longitudinal distributions of a toxic chemical. The two-dimensional toxicant simulation model was applied to Shasta Reservoir in California to simulate the physico-chemical processes and fate of a volatile toxic compound, methyl isothiocyanate (MITC), during a chemical spill into the Sacramento River in 1991. The predicted MITC concentrations were compared with those observed. The effect of reservoir flow regimes on the transport and fate of the toxic substance was investigated. The results suggested that the persistence of MITC is significantly influenced by different flow regimes. Methyl isothiocyanate is more persistent in the reservoir under an interflow condition due to reduced volatilization from deep layers than under an overflow condition. In the overflow situation, the plume moved more slowly toward the dam and experienced greater dissipation. This analysis can assist in toxic spill control and reservoir management, including field sampling and closure of water intakes.     

Relationship between water repellency and native and petroleum-derived organic carbon in soils

Some soils develop severe and persistent water repellency following contamination with crude oil. This study was conducted to characterize and compare the spatial distribution of soil water repellency and residual oil contamination at 12 such sites. The molarity of ethanol droplet (MED) test was used to assess soil water repellency and the content of dichloromethane-extractable organics (DEO) was used to quantify residual oil in soil. We found a relatively strong positive correlation between MED and DEO in soil (r2 = 0.74). Both variables tended to decrease abruptly with depth at 11 of the 12 study sites. Dichloromethane-extractable organics similarly decreased with depth in control adjacent soil (MED = 0 M), but from an average concentration one to two orders of magnitude lower than in water-repellent soil. Using data from corresponding control adjacent and water-repellent soils, we determined that approximately 29 and 10% of measured total organic carbon in water-repellent A- and B-horizon soil, respectively, consists of dichloromethane-insoluble organic carbon of petroleum origin. We propose that this fraction contains most of the causative agents of soil water repellency at the studied sites.