Saprotrophic soil fungi to improve phosphorus solubilisation and release: In vitro abilities of several species

Modern agriculture is dependent on phosphate rock (PR), which is a nonrenewable resource. Improvement of phosphorus (P) availability for crops in agricultural soils represents a key strategy to slow down the depletion of PR. The aim of this study was to identify potential P biofertilisers among saprotrophic fungal species. We tested 30 fungal strains belonging to 28 taxa (4 Zygomycota and 24 Ascomycota) and with different life strategies. The study showed that many saprotrophic fungi have the ability to mobilise P from insoluble forms according to a variety of mechanisms. Our results expand the pool of P solubilising fungal species, also suggesting a new solubilisation index and shedding light on parameters that could be basic in the selection of efficient soil P-biofertilisers fungi. Rhizopus stolonifer var. stolonifer, Aspergillus niger and Alternaria alternata were found to be the best performing strains in terms of amounts of TCP solubilisation.     

Is there a link between motor vehicle collisions and being a cigarette smoker in Canada? Analysis of survey data from Ontario from 2002 to 2014

Objective: Although most research on drugs and driving has focused on the use of alcohol and cannabis, research that has been conducted on cigarette smoking and collisions has found that smokers have an increased collision involvement. Studies dating from 1967 through 2013 have shown a crude relative risk of about 1.5 among smokers compared to nonsmokers. In Canada, the association between smoking and collisions has not been recently investigated. Studies that have examined the association between smoking and collisions often did not control for all confounding factors, such as alcohol use and driving exposure, which have been associated with increased collision rates. Additionally, a number of these studies were examined in countries and at times when prevalence of smoking was much higher than is currently the case in Canada. The purpose of this research is to examine the association between self-reported current smoking and past-year collision involvement, controlling for confounding factors, in a large representative sample of adult drivers in Ontario, Canada, from 2002 and 2014.

Method: Data are based on the Centre for Addiction and Mental Health (CAMH) Monitor, an ongoing, rolling telephone survey of Ontario adults that provides epidemiological surveillance of indicators related to alcohol, tobacco, and other drug use, as well as physical and mental health. The survey uses random-digit-dialing methods via Computer-Assisted Telephone Interview, with response rates over 50%.

Results: Prevalence of self-reported collision involvement within the past year for 2002–2014 was 8.6% among those who currently smoke compared to 6.5% of nonsmokers. Logistic regression analysis, controlling for the potential confounding effects of sociodemographics, driving exposure measures, drinking frequency, and hazardous alcohol use, found that the overall odds for collision involvement in the preceding year among current smokers for 2002–2014 was 1.27 (95% confidence interval [CI], 1.06–1.53) times that of nonsmokers.

Conclusions: These findings indicate that despite a substantial reduction in overall prevalence of smoking in Canada, smokers still have a significantly increased odds of collision involvement, even when controlling for alcohol and exposure. Additionally, the results are consistent with the increased odds/risks of motor vehicle collisions found in other countries.     

4-hours resolution data to study PM10 in a “hot spot” area in Europe

Nowadays, high-time resolved aerosol studies are mandatory to better understand atmospheric processes, such as formation, removal, transport, deposition or chemical reactions. This work focuses on PM10 physical and chemical characterisation with high-time resolution: elements (from Na to Pb), ions and OC/EC fractions concentration were determined during two weeks in summer and two in winter 2006 with 4-hours resolution. Further measurements aimed at hourly elemental characterisation of fine and coarse fractions and at the determination of particles number concentration in the 0.25-32 microm size range in 31 bins. The chemical mass closure was carried out in both seasons, enhancing intra-day differences in PM10 composition. In Milan, the highest contribution came from organic matter (34% and 33% in summer and winter, respectively); other important contributors were secondary inorganic compounds (16% and 24% in summer and winter, respectively) and, in summer, crustal matter (14%). Temporal trends showed strong variations in PM10 composition during contiguous time-slots and diurnal variations in different components contribution were identified. Moreover, peculiar phenomena, which would have hardly been detected with 24-hours samplings, were evidenced. Particles removal due to precipitations, aerosol local production and long range transport were studied in detail.     

Study of odor compounds in gaseous effluents generated during production of poultry feather and viscera meal using headspace solid phase microextraction

This work reports the screening and characterization of odor compounds in gaseous effluents generated during the production of poultry feather and viscera meal, the by-products of the poultry meat industry. Chemical analysis was carried out by solid phase microextraction in the headspace (HS-SPME) mode. Exhaust air of thermal processing of poultry feather and viscera were sampled online from a bench-scale digester, condensed, and collected in sampling flasks. Both volatile and semivolatile organic compounds present in the condensed gases were extracted under agitation at constant temperature. The extracts were analyzed with a gas chromatograph coupled to a mass spectrometric detector (GC/MSD). The identification of compounds was carried out by comparing the mass spectra obtained with those from the Wiley library and quantification was accomplished through authentic analytical standards. For the determination of the best extraction conditions and analysis, extraction fibers of different coatings and polarities were tested: divinylbenzene/carboxen/polydimethyilsiloxane (DVB/CAR/PDMS), carbowax/divinylbenzene (CW/DVB), and polydimethylsiloxane (PDMS) and chromatography columns of different polarities: DB-WAX (polar) and DB-5 (nonpolar). The best extraction conditions and analysis of the compounds of interest were obtained by the use of the SPME fiber with DVB/CAR/PDMS coating and analysis by GC/MSD with polar capillary column. Several carboxylic acids were identified, as well as mercaptans, amines, and aldehydes of great environmental importance.     

Concentrations of Cu, Fe, Mn, and Zn in tropical soils amended with sewage sludge and composted sewage sludge

Sewage sludge may be used as an agricultural fertilizer, but the practice has been criticized because sludge may contain trace elements and pathogens. The aim of this study was to compare the effectiveness of total and pseudototal extractants of Cu, Fe, Mn, and Zn, and to compare the results with the bioavailable concentrations of these elements to maize and sugarcane in a soil that was amended with sewage sludge for 13 consecutive years and in a separate soil that was amended a single time with sewage sludge and composted sewage sludge. The 13-year amendment experiment involved 3 rates of sludge (5, 10, and 20 t ha^?1). The one-time amendment experiment involved treatments reflecting 50, 100, and 200 % of values stipulated by current legislation. The metal concentrations extracted by aqua regia (AR) were more similar to those obtained by Environmental Protection Agency (EPA) 3052 than to those obtained by EPA3051, and the strongest correlation was observed between pseudo(total) concentrations extracted by AR and EPA3052 and bioavailable concentrations obtained by Mehlich III. An effect of sewage sludge amendment on the concentrations of heavy metals was only observed in samples from the 13-year experiment.     

Kinetics assessment and modeling of biogas production by anaerobic digestion of food wastes and acclimated sewage sludge

Journal of Material Cycles and Waste Management - In this work, food wastes (FWs) and domestic sewage sludge (DSS) were used as raw materials for energy recovery by anaerobic digestion (AD). AD was...     

The Triple Bottom Line for Sustainable Community Development

Rural communities in Australia are confronting a period of unprecedented change. They face declining commodity prices, the withdrawal of both public and private sector services, such as banks and hospitals, and the closure of small businesses. Their populations are in decline, with young people leaving for the larger regional centres. Many also face a declining resource base as soils become saline and water resources are sold to areas with higher unit returns. This paper presents a framework for sustainable community development based on emerging ideas of performance auditing and the development of progress indicators. The triple bottom line community audit approach is recast for the community level, measuring performance on improved community wellbeing, reduced environmental impact and increased economic vitality. Rural communities need to redefine their future. A sustainability focus offers a way forward. Las comunidades rurales en Australia estan afrontando un periodo de cambio sin precedente. Enfrentan disminución en los precios de los productos, retiro de servicios de ambos sectores, publico y privado, como bancos y hospitales y el cierre de pequeños negocios. Su población está disminuyendo, la gente joven emigra hacia centros regionales mas grandes. Muchos tambien enfrentan un deterioro en los recursos base ya que los suelos se tornan salinos, y los recursos de agua son vendidos a áreas con retorno de unidad mas alto. Este documento presenta una estructura para el desarrollo comunitario sostenible basado en el surgimiento de ideas de la revisión del desempeño y del desarrollo de indicadores de progreso. El enfoque de auditoria del triple resultado final esta rehecho para el nivel de la comunidad, midiendo el desempeño en el bienestar de la comunidad mejorada, el impacto ambiental reducido, y la vitalidad económica incrementada. Las comunidades rurales necesitan redefinir su futuro. Un enfoque sostenible ofrece una vía hacia adelante.     

PCDD/F mass balance in the flue gas cleaning units of a MSW incineration plant

With the main purpose of evaluating PCDD/F presence and the corresponding mass balance over the emissions control system, an extensive study was performed on a municipal solid waste full scale incinerator equipped with a best available technology flue gas treatment line. Present paper reports the main results obtained, with particular reference to the PCDD/F concentration profiles and mass balances derived for every process unit of the flue gas control system. Total release evaluated for the plant is also outlined compared with data on PCDD/F content of raw waste and with reference values included in most recent guidelines.     

Efficiency of physicochemical and biological treatments of vinasse and their influence on indigenous microbiota for disposal into the environment

Molasses-based distilleries are one of the most polluting industries generating large volumes of high strength wastewater called vinasse. Different processes covering anaerobic, aerobic as well as physicochemical methods have been employed to treat this effluent. This study evaluated the microbial communities present in the vinasse during different stages of its treatment by traditional and molecular methods. The analysis of the efficiency of each treatment was performed by physicochemical parameters and toxicity analysis. The treatment of vinasse was performed in the following steps: high flow fermentation; filtration; chemical flakes; low-flow fermentation; filtration; and neutralization. The physicochemical analysis in different stages of the vinasse treatment demonstrated that phases of treatment influenced the performance of the evaluated parameters. Among the 37 parameters, 9 were within the limits established by the Commission for Environmental Policy of Minas Gerais, Brazil (COPAM), especially BOD (96.7% of pollution reduction), suspended solids (99.9%), pH, copper (88%), iron (92.9%), and manganese (88%). Some parameters, even after treatment, did not fit the maximum allowed by legislation. The microbial population decreased reaching 3 log CFU/ml present in the steps of the flakes chemical and disinfection treatment of vinasse. Lactobacillus brevis and Pichia kudriavzevii were present in all stages of the treatments, showing that these microorganisms were resistant and demonstrated that they might be important in the treatment of vinasse. The vinasse showed a significant reduction of pollution load after the disinfection treatment however still should not be discarded into water bodies because the high values of tannins and sediment solids, but suggest the use of the effluent in the cooling coil during the distillation process of the beverage.