Analysis of soil characteristics of different land uses and metal bioaccumulation in wheat grown around rivers: possible human health risk assessment

The present study was conducted to determine the physico-chemical properties and heavy metal contents in soils under three land uses (agricultural, riverbank and roadside) from areas situated around rivers (Beas and Sutlej) in Punjab, India. Heavy metal contents in wheat samples (grain and fodder) growing in the area were also analyzed in order to find out potential human health risk through wheat consumption. The studied soils under the three land uses were found to be basic in nature with sandy texture, low soil organic matter and other soil nutrients. Comparatively higher amounts of soil nutrients were observed in soils under agricultural land use as compared to riverbank and roadside land uses. The amounts of heavy metals (Cr, Cu, Co and Pb) analyzed in soils were lower than the various national and international maximum permissible limits, but heavy metal contents observed in wheat fodder samples exceeded the maximum permissible limits for fodder. The soil-to-plant metal bioaccumulation factor was found to be highest for Cu (3.812 for soil–wheat grain and 1.874 for soil–wheat fodder), which showed the bioaccumulation of heavy metals from soils to crops, and the wheat straw-to-grain translocation factor was found to be highest for Co (4.375). The hazard index calculated to assess non-carcinogenic health risks was found above 1 for children, meaning that the wheat grains can pose health risks to children.     

Bioremediation and reclamation of soil contaminated with petroleum oil hydrocarbons by exogenously seeded bacterial consortium: a pilot-scale study

Purpose  

Spillage of petroleum hydrocarbons causes significant environmental pollution. Bioremediation is an effective process to remediate petroleum oil contaminant from the ecosystem. The aim of the present study was to reclaim a petroleum oil-contaminated soil which was unsuitable for the cultivation of crop plants by using petroleum oil hydrocarbon-degrading microbial consortium.     

New Route for Devulcanization of Natural Rubber and the Properties of Devulcanized Rubber

Devulcanization of natural rubber (NR) compound was carried out by means of benzoyl peroxide as a devulcanizing agent by two different techniques namely (a) chemical process and (b) mechano-chemical process. Furthermore, the effects of time and concentration of devulcanizing agent on the devulcanization process were investigated. The extent of devulcanization of natural rubber was studied by estimation of percent devulcanization, volume fraction of rubber after swelling, Mooney viscosity and crosslinked density. The devulcanized natural rubber obtained from mechano-chemical process was blended with virgin natural rubber in different proportions. The mechanical properties and morphology of the revulcanized blends were examined and found to be interesting. Thus, waste rubber could be reused successfully by this technique.     

Cytogenetic studies of chromium (III) oxide nanoparticles on Allium cepa root tip cells

The current study evaluates the cytogenetic effects of chromium (III) oxide nanoparticles on the root cells of Allium cepa. The root tip cells of A. cepa were treated with the aqueous dispersions of Cr₂O₃ nanoparticles (NPs) at five different concentrations (0.01, 0.1, 1, 10, and 100 μg/mL) for 4 hr. The colloidal stability of the nanoparticle suspensions during the exposure period were ascertained by particle size analyses. After 4 hr exposure to Cr₂O₃ NPs, a significant decrease in mitotic index (MI) from 35.56% (Control) to 35.26% (0.01 μg/mL), 34.64% (0.1 μg/mL), 32.73% (1 μg/mL), 29.6% (10 μg/mL) and 20.92% (100 μg/mL) was noted. The optical, fluorescence and confocal laser scanning microscopic analyses demonstrated specific chromosomal aberrations such as—chromosome stickiness, chromosome breaks, laggard chromosome, clumped chromosome, multipolar phases, nuclear notch, and nuclear bud at different exposure concentrations. The concentration-dependent internalization/bio-uptake of Cr₂O₃ NPs may have contributed to the enhanced production of anti oxidant enzyme, superoxide dismutase to counteract the oxidative stress, which in turn resulted in observed chromosomal aberrations and cytogenetic effects. These results suggest that A. cepa root tip assay can be successfully applied for evaluating environmental risk of Cr₂O₃ NPs over a wide range of concentrations.     

Improved bioavailability and biodegradation of a model polyaromatic hydrocarbon by a biosurfactant producing bacterium of marine origin

Polyaromatic hydrocarbons (PAHs) are organic pollutants mostly derived from the processing and combustion of fossil fuels and cause human health hazards. In the present study a marine biosurfactant producing strain of Bacillus circulans was used to increase the bioavailability and consequent degradation of a model polyaromatic hydrocarbon, anthracene. Although the organism could not utilize anthracene as the sole carbon source, it showed better growth and biosurfactant production in an anthracene supplemented glycerol mineral salts medium (AGlyMSM) compared to a normal glycerol mineral salts medium (GlyMSM). The biosurfactant product showed high degree of emulsification of various hydrocarbons. Analysis by gas chromatography (GC), high performance thin layer chromatography (HPTLC) and Fourier transform infrared spectroscopy (FTIR) showed that the biosurfactant could effectively entrap and solubilize PAH. Thin layer chromatographic analysis showed that anthracene was utilized as a carbon substrate for the production of biosurfactant. Thus organic pollutant anthracene was metabolized and converted to biosurfactants facilitating its own bioremediation.     

Determination of pesticide residues in IPM and non-IPM samples of mango (Mangifera indica)

Studies were conducted to analyze the residue of commonly used pesticides viz. methyl parathion, chloropyrifos, endosulfan, cypermethrin, fenvalerate, carbendazim, imidacloprid and carbaryl in mango, Dashehari variety, integrated pest management (IPM) and non-IPM samples were collected from the IPM and non-IPM orchards, Lucknow, India. We also present a method for the simultaneous determination of these pesticides in mango samples. Residues of methyl parathion, chloropyriphos, endosulfan, cypermethrin, fenvalerate were extracted from the samples with acetone: cyclohexane: ethyl acetate in the ratio 2:1:1 followed by cleanup using neutral alumina. Analysis was performed by gas chromatography-electron capture detector (GC-ECD) with a megabore column (OV-1). Residues of carbendazim, imidacloprid and carbaryl were extracted with acetone and after cleanup, analysis was performed by high performance liquid chromatography (HPLC) using photo diode array (PDA) detector. Recoveries of all the pesticides ranged between 72.7-110.6%, at 0.1 and 1.0 microg g(-1) level of fortification. The residues detected in non-IPM samples of mango were found to be below the prescribed limits of maximum residue limit (MRL) while IPM samples were free from pesticide residues.     

Leachate from market refuse and biomethanation study

The market place is considered to be an important centre of daily life of campus community. In India, as in Europe and the USA, other forms of shopping have emerged significantly and now predominate, for instance department stores and supermarkets. Though, it is suffered from poor waste management, but the place could be a potential source for obtaining non-conventional energy. The present study examined the quality of market waste management of the Indian Institute of Technology Campus along with the feasibility of biogas production from leachate generated in the waste. Solid wastes from different storage locations of the market place were collected and analyzed. The characteristics of solid wastes were found to be degradable in nature. The wastes, composed of 85% of vegetable origin, were placed in a container and water was added to to generate leachate. The self-purification efficiency of leachate was also studied in the Indian environment and compared with research findings in the USA under an identical moisture application rate. Leachate characterization was investigated both under saturated and submerged conditions. The treatability of leachate was studied in a laboratory-scale up-flow anaerobic filter with hollow burnt clay rings as packing media. It was observed that 4,000–6,000 mg/l would be the optimum range of inlet chemical oxygen demand (COD) concentration for leachate treatment because of the inhibitory effect of ammonia, sulphide, volatile fatty acids and toxic metals in high concentrations at higher strengths of leachate. The gas production rate was found to be at a maximum at 38°C and containing 70–75% methane. From experimental data, it was revealed that 83% COD was removed with input COD concentration of 5,475 mg/l at 2 days hydraulic retention time with biogas yield coefficients of 0.61. The present study also investigated the removal efficiency of chloride, ammonia, sulphide and nitrate.     

Impact of cadmium and lead on Catharanthus roseus--a phytoremediation study

The Madagascar Periwinkle, Catharanthus roseus (L.) G. Don (a valued medicinal plant) was exposed to different concentrations ofheavymetals like, CdCl, and PbCl, with a view to observe their bioaccumulation efficiency. Germination was inhibited by both the heavy metals in the seeds previously imbibed in GA, and KNO, for 24 hr. EC50 (the effective concentration which inhibits root length by 50%) was recorded as 180 microM for CdCl2, and 50 microM for PbCl2. Both alpha-amylase and protease activity were reduced substantially on treatment of seeds with increasing concentrations of CdCl2, and PbCl2. Malondialdehyde (MDA) a product of lipoxigenase (LOX) activity also increased due to the treatment of both CdCl, and PbCl2. When two-months-old plants grown in normal soil were transferred to soils containing increasing amounts of these two heavy metals, senescence of lower leaves and extensive chlorosis were noticed after four days of transfer However, plants gradually acclimatized and after 20 days the chlorophyll content was almost comparable to normal. Plants receiving CdCl2 treatment (250 microg g(-1) and less) became acclimatized after two weeks and started normal growth. But PbCl2 of 432 microg g(-1) and less could not affect the plant growth throughout, after a preliminary shock was erased. In case of CdCl2 treatment, a stunted growth with reduced leaf area, reduced biomass and sterility were recorded after six months, while plants show normal growth and flowering in case of PbCl2 treatment. Total alkaloid was also found to be decreased in the roots of CdCl2 treated plants. No change was observed in case of PbCl2. GA3 treatments to the CdCl2 treated plants show internode elongation and increase in leaf area with relatively elongated leaves and thinning of stem diameter AAS analyses of leaves of treated plants exhibited 5-10% accumulation of cadmium, but there was no accumulation of lead at all.     

Assessment of phenol infiltration resilience in soil media by HYDRUS-1D transport model for a waste discharge site

The movement of contaminants through soil imparts a variety of geo-environmental problem inclusive of lithospheric pollution. Near-surface aquifers are often vulnerable to contamination from surface source if overlying soil possesses poor resilience or contaminant attenuation capacity. The prediction of contaminant transport through soil is urged to protect groundwater from sources of pollutants. Using field simulation through column experiments and mathematical modeling like HYDRUS-1D, assessment of soil resilience and movement of contaminants through the subsurface to reach aquifers can be predicted. An outfall site of effluents of a coke oven plant comprising of alarming concentration of phenol (4–12.2 mg/L) have been considered for studying groundwater condition and quality, in situ soil characterization, and effluent characterization. Hydrogeological feature suggests the presence of near-surface aquifers at the effluent discharge site. Analysis of groundwater of nearby locality reveals the phenol concentration (0.11–0.75 mg/L) exceeded the prescribed limit of WHO specification (0.002 mg/L). The in situ soil, used in column experiment, possess higher saturated hydraulic conductivity (K _S ?=?5.25?×?10^?4 cm/s). The soil containing 47 % silt, 11 % clay, and 1.54 % organic carbon content was found to be a poor absorber of phenol (24 mg/kg). The linear phenol adsorption isotherm model showed the best fit (R ²?=?0.977, RMSE?=?1.057) to the test results. Column experiments revealed that the phenol removal percent and the length of the mass transfer zone increased with increasing bed heights. The overall phenol adsorption efficiency was found to be 42–49 %. Breakthrough curves (BTCs) predicted by HYDRUS-1D model appears to be close fitting with the BTCs derived from the column experiments. The phenol BTC predicted by the HYDRUS-1D model for 1.2 m depth subsurface soil, i.e., up to the depth of groundwater in the study area, showed that the exhaustion point was reached within 12 days of elapsed time. This clearly demonstrated poor attenuation capacity of the soil to retard migration of phenol to the groundwater from the surface outfall site. Suitable liner, based on these data, may be designed to inhibit subsurface transport of phenol and thereby to protect precious groundwater from contamination.