Photolysis of oxyfluorfen in aqueous methanol

Photolysis of oxyfluorfen, an herbicide of the nitrodiphenyl ether class, was studied in aqueous methanol under UV and sunlight. UV irradiation was carried out in a borosilicate glass photoreactor (containing 250 ppm oxyfluorfen in 50% aqueous methanol) equipped with a quartz filter and 125 watt mercury lamp (maximum output 254 nm) at 25 ± 1°C. Sunlight irradiation was conducted at 28 ± 1°C in borosilicate Erlenmeyer flasks containing 250 ppm oxyfluorfen in 50% aqueous methanol. The samples from both the irradiated conditions were withdrawn at a definite time interval and extracted to measure oxyfluorfen content by gas chromatography-flame ionization detector for rate study. The half-life values were 20 hours and 2.7 days under UV and sunlight exposure, respectively. Photolysis of oxyfluorfen yielded 13 photoproducts of which three were characterized by infrared spectrophotometer and ¹H NMR and ¹³C NMR spectroscopy. The rest of the photoproducts were identified by gas chromatography-mass spectrometry (GC-MS) and thin layer chromatography (TLC). An ionization potential 70 eV was used for electron impact-mass spectrometry (EI-MS) and methane was used as reagent gas for chemical ionization-mass spectrometry (CI-MS). Two of the photoproducts were also synthesized for comparison. The main phototransformation pathways of oxyfluorfen involved nitro reduction, dechlorination, and hydrolysis as well as nucleophiles displacement reaction.     

Study on the Thermo-Mechanical and Biodegradable Properties of Shellac Films Grafted with Acrylic Monomers by Gamma Radiation

Shellac (SL) films were prepared by casting and were grafted with various acrylic monomers of different functionalities using gamma radiation. Different formulations of shellac with varying concentrations (3, 5 and 7%) of these acrylic monomers such as 2-hydroxyethyl methacrylate (HEMA), 2-ethylhexyl acrylate (EHA) and 1,4-butanediol diacrylate (BDDA) in methanol were prepared. The pure shellac and other treated films were then irradiated under gamma radiation (Co-60) at different doses (0.5–5 kGy) at a dose rate of 3.5 kGy/h where 1 Gy = 1 J/kg = 100 rads. The mechanical properties like tensile strength (TS) and elongation at break (Eb) of the prepared films were studied. The mechanical properties of the irradiated shellac films demonstrated superior values. Among the formulations, shellac grafted with BDDA (SL-g-BDDA) showed the highest TS and Eb values which were 543 and 168% higher than those of raw shellac films, respectively. The water uptake behavior of raw and treated films was also studied. The raw film showed 11% water uptake but HEMA containing film showed 67%. In the soil burial test, HEMA containing shellac film was rapidly degraded than other raw, EHA and BDDA grafted films. Thermal properties indicated that grafting of acrylic monomers decreased the melting temperature of the pure shellac films.     

Fusing probability density function into Dempster–Shafer theory of evidence for the evaluation of water treatment plant

The evaluation of the status of a municipal drinking water treatment plant (WTP) is important. The evaluation depends on several factors, including, human health risks from disinfection by-products (R), disinfection performance (D), and cost (C) of water production and distribution. The Dempster–Shafer theory (DST) of evidence can combine the individual status with respect to R, D, and C to generate a new indicator, from which the overall status of a WTP can be evaluated. In the DST, the ranges of different factors affecting the overall status are divided into several segments. The basic probability assignments (BPA) for each segment of these factors are provided by multiple experts, which are then combined to obtain the overall status. In assigning the BPA, the experts use their individual judgments, which can impart subjective biases in the overall evaluation. In this research, an approach has been introduced to avoid the assignment of subjective BPA. The factors contributing to the overall status were characterized using the probability density functions (PDF). The cumulative probabilities for different segments of these factors were determined from the cumulative density function, which were then assigned as the BPA for these factors. A case study is presented to demonstrate the application of PDF in DST to evaluate a WTP, leading to the selection of the required level of upgradation for the WTP.     

Risk assessment and chemical decontamination of an oxime carbamate insecticide (methomyl) from eggplant, Solanum melongena L.

Methomyl, S-methyl (EZ)-N-(methylcarbamoyloxy)thioacetimidate, is a systemic insecticide chosen for the management of shoot and fruit borer, Leucinodes orbonalis G. Codex Alimentarious Commission has proposed a maximum residue limit (MRL) of 0.2 mg kg^???1 of methomyl, and there is a need to validate this value on eggplant. First + first-order model can explain the nonlinear dissipation pattern of methomyl conveniently in comparison to first-order kinetics. The preharvest intervals (PHI) of 27.3 and 35.3 days as obtained from first + first-order model for single and double doses would bring down the methomyl residue below MRL in actual practice. The respective half-lives were 6.6 and 7.8 days. On the other hand, first-order model suggests methomyl dissipated with a half-life value around 5 days and proposed PHIs of 6.57 and 8.57 days for single and double doses, which was far from reality. Hence, five different decontamination agents were chosen for the decontamination of methomyl from eggplant. Safety factors such as theoretical maximum daily intake and maximum permissible intake were used to evaluate risk assessment to human health. A 3-day waiting period for the both doses, following conventional agricultural practice and processing factor could not ensure sufficient margin of safety. Subjecting the data to a processing factor of 60% could not bring the residues below the proposed MRL by Codex. Methomyl is not found appropriate and effective for application in eggplant. Either the proposed MRL needs to be revised or good agricultural practice involving methomyl for plant protection in eggplant cultivation is questioned.     

An inexpensive light-scattering particle monitor: field validation

We have developed a small, light, passive, inexpensive, datalogging particle monitor called the "UCB" (University of California Berkeley particle monitor). Following previously published laboratory assessments, we present here results of tests of its performance in field settings at high particle concentrations. We demonstrate the mass sensitivity of the UCB in relation to gravimetric filter-based PM(2.5) mass estimates as well as commercial light-scattering instruments co-located in field chamber tests and in kitchens of wood-burning households. The coefficient of variation of the unadjusted UCB mass response in relation to gravimetric estimates was 15%. Although requiring adjustment for differences in sensitivity, inter-monitor performance was consistently high (r(2) > 0.99). Moreover, the UCB can consistently estimate PM(2.5) mass concentrations in wood-burning kitchens (Pearson r(2) = 0.89; N = 99), with good agreement between duplicate measures (Pearson r(2) = 0.94; N = 88). In addition, with appropriate cleaning of the sensing chamber, UCB mass sensitivity does not decrease with time when used intensively in open woodfire kitchens, demonstrating the significant potential of this monitor.     

Sustainability of metal recovery from E-waste

The issue of E-waste disposal is concerning all the stakeholders, from policymakers to the end users which have accelerated the research and development on environmentally sound disposal of E-waste. The recovery of metals (gold, tantalum, copper, iron etc.) from E-waste has become an important focus. The mechanical recycling, thermo-chemical processes like pyrolysis, pyro-, hydro- and biometallurgical processes can play important roles in the Metal Recovery from E-waste (MREW) technology. For the industrial application of the MREW technology, it is important to analyze the sustainability. In this paper, two case studies have been presented on E-waste recycling industries in India and China. Based on the literature data, an attempt has been made to assess qualitatively the overall sustainability of MREW technology considering the three pillars, i.e., environmental, economic and social. Two conceptual frameworks with (Option-2) and without (Option-1) pyrolysis for integrated MREW units have been developed and the generalized energy and environmental impact analysis has been made using the principles of LCA. The impacts of two options have been compared. Option 2 has been found to be more efficient and sustainable. It has been realized that climate change, fossil fuel depletion, water depletion, eutrophication, acidification, fresh and marine water ecotoxicity are possible impact categories. The recommendations based on the generalized assessment are in good agreement with the findings of previous researchers on individual steps of MREW unit. The findings of this paper are expected to be beneficial to researchers and stakeholders for research directions and decision making on MREW.

Open image in new window

     

Arsenic in groundwater in six districts of West Bengal,India

Arsenic in groundwater above the WHO maximum permissible limit of 0.05 mg l^–1 has been found in six districts of West Bengal covering an area of 34 000 km² with a population of 30 million. At present, 37 administrative blocks by the side of the River Ganga and adjoining areas are affected. Areas affected by arsenic contamination in groundwater are all located in the upper delta plain, and are mostly in the abandoned meander belt. More than 800 000 people from 312 villages/wards are drinking arsenic contaminated water and amongst them at least 175 000 people show arsenical skin lesions. Thousands of tube-well water in these six districts have been analysed for arsenic species. Hair, nails, scales, urine, liver tissue analyses show elevated concentrations of arsenic in people drinking arsenic-contaminated water for a longer period. The source of the arsenic is geological. Bore-hole sediment analyses show high arsenic concentrations in only few soil layers which is found to be associated with iron-pyrites. Various social problems arise due to arsenical skin lesions in these districts. Malnutrition, poor socio-economic conditions, illiteracy, food habits and intake of arsenic-contaminated water for many years have aggravated the arsenic toxicity. In all these districts, major water demands are met from groundwater and the geochemical reaction, caused by high withdrawal of water may be the cause of arsenic leaching from the source. If alternative water resources are not utilised, a good percentage of the 30 million people of these six districts may suffer from arsenic toxicity in the near future.