Temporal variation of volatile organic compounds and their major emission sources in Seoul, Korea

This study examines the characteristics of volatile organic compounds (VOCs) and their major emission sources at the Bulgwang site in Seoul, Korea. The annual levels of VOCs (96.2–121.1 ppb C) have shown a decreasing trend from 2004 to 2008. The most abundant component in Seoul was toluene, which accounted for over 23.5 % of the total VOCs on the parts per billion on a carbon basis, and the portions of alkanes with two to six carbons constituted the largest major lumped group, ranging from 40.1 to 48.4 % (45.3?±?3.7 %) of the total VOCs. Major components of the solvent (toluene, m/p-xylene, o-xylene, and ethylbenzene) showed high in daytime and summer and low in nighttime and winter due mainly to the variation of the ambient temperature. The species mostly emitted from gasoline vapor (i/n-butane, i/n-pentane, n-hexane, and 2-methylpentane) and vehicular exhaust (ethylene, acetylene, and benzene) showed bimodal peaks in the diurnal variation around the commuting hours because of the high traffic volume. For the 14 out of 15 highest concentration species, the weekend effect was only evident on Sundays because of the stepwise implementation of the 5-day work-week system. Principal components analysis (PCA) was applied in order to identify the sources of the 15 highest concentration VOCs and, as a result, three principal components such as gasoline vapor (48.9 %), vehicular exhaust (17.9 %), and evaporation of solvents (9.8 %) were obtained to explain a total of 76.6 % of the data variance. Most influential contributing sources at the sampling site were traffic-related ones although the use of solvent was the dominant emission source based on the official emission inventory.     

Organohalogen compounds in human breast milk from mothers living in Payatas and Malate, the Philippines: Levels, accumulation kinetics and infant health risk

Human breast milk samples (n = 33) from primipara and multipara mothers from Payatas a waste dump site, and Malate a reference site in the Phillipines were collected in 2004 and analyzed for eight organohalogen compounds, viz., PCBs, DDTs, CHLs, HCHs, HCB, TCPMe, PBDEs and HBCDs. DDTs and PCBs were predominant in all the samples. Overall mean concentrations of PBDEs found in our study were higher (7.5 ng/g lipid wt.) than those reported for Japan and many other Asian countries. Primipara mothers had significantly higher levels of DDTs, CHLs and HCHs than multipara mothers, but not PBDEs and HBCDs. A few individuals accumulated CHLs close to or even higher than the tolerable daily intake guidelines proposed by Health Canada.     

A long-term performance test on an autotrophic denitrification column for application as a permeable reactive barrier

The long-term performance of a sulfur-based reactive barrier system was evaluated using autotrophic denitrification in a large-scale column. A bacterial consortium, containing autotrophic denitrifiers attached on sulfur particles, serving as an electron donor, was able to transform 60mgNL(-1) of nitrate into dinitrogen. In the absence of phosphate, the consortium was unable to remove nitrate, but after the addition of phosphate, nitrate removal was readily evident. Once the column operation had stabilized, seepage velocities of 1.0x10(-3) and 0.5x10(-3)cms(-1), corresponding to hydraulic residence times of 24 and 48h, respectively, did not affect the nitrate removal efficiency, as determined by the nitrate concentration in the effluent. However, data on the nitrate, nitrite and sulfate distribution along the column indicated differential transformation patterns with column depths. Based on the dinitrogen concentration in the total gas collected, the denitrification efficiency of the tested column was estimated to be more than 95%. After 500d operation, the hydrodynamic characteristics of the column slightly changed, but these changes did not inhibit the nitrate removal efficiency. Data from a bacterial community analysis obtained from four parts of the column demonstrated the selective a spatial distribution of predominant species depending on available electron acceptors or donors.     

Response surface optimization of substrates for thermophilic anaerobic codigestion of sewage sludge and food waste

This study investigated the effects of food waste constituents on thermophilic (55 degrees C) anaerobic codigestion of sewage sludge and food waste by using statistical techniques based on biochemical methane potential tests. Various combinations of grain, vegetable, and meat as cosubstrate were tested, and then the data of methane potential (MP), methane production rate (MPR), and first-order kinetic constant of hydrolysis (kH) were collected for further analyses. Response surface methodology by the Box-Behnken design can verify the effects and their interactions of three variables on responses efficiently. MP was mainly affected by grain, whereas MPR and kH were affected by both vegetable and meat. Estimated polynomial regression models can properly explain the variability of experimental data with a high-adjusted R2 of 0.727, 0.836, and 0.915, respectively. By applying a series of optimization techniques, it was possible to find the proper criteria of cosubstrate. The optimal cosubstrate region was suggested based on overlay contours of overall mean responses. With the desirability contour plots, it was found that optimal conditions of cosubstrate for the maximum MPR (56.6 mL of CH4/g of chemical oxygen demand [COD]/day) were 0.71 g of COD/L of grain, 0.18 g of COD/L of vegetable, and 0.38 g of COD/L of meat by the simultaneous consideration of MP, MPR, and kH. Within the range of each factor examined, the corresponding optimal ratio of sewage sludge to cosubstrate was 71:29 as the COD basis. Elaborate discussions could yield practical operational strategies for the enhanced thermophilic anaerobic codigestion of sewage sludge and food waste.     

Assessment of persistent organic pollutants in sediments from Lower Mekong River Basin

Organochlorine compounds (OCs) in sediments collected from various locations in Lower Mekong River Basin (MRB) in Laos and Thailand were examined to elucidate their occurrence, distribution and potential ecological risk. Concentration of PCBs and DDTs were higher than other OCs, ranging from 0.18 to 310 μg kg⁻¹ dry wt. and from 0.027 to 52 μg kg⁻¹ dry wt., respectively, whereas CHLs, HCHs and HCB were 1-3 orders of magnitude lower. Geographical distribution indicates that levels of PCBs, DDTs and CHLs in the Vientiane canal were significantly higher than those in mainstream of Mekong River, Phong River and its surrounding areas, indicating significant sources of these compounds in urbanized areas. Comparison with other parts of MRB indicates that PCBs were higher in Laos, whereas DDTs were more prevalent in Mekong Delta, indicating location specific contaminations of these compounds in MRB. The ratios of DDTs composition indicate possible difference in the historical input of DDT among locations in and around Mekong River. Hazard assessment of PCBs and DDTs indicate possible toxic potential particularly in areas close to point sources such as intensive human activities and agricultural areas which highlight the need for further study.     

Evaluation of the potential impact of polluted sediments using Manila clam Ruditapes philippinarum: bioaccumulation and biomarker responses

An assessment was made to monitor the short-term impact of heavily polluted sediments that may move out from the brackish man-made Lake Shihwa outside of the sea dike due to operations of a tidal power plant. Here, we exposed the Manila clam Ruditapes philippinarum collected from the western coast of Korea to natural sediment under lab condition for 96?h. Sediments were collected from Lake Shihwa and outside of the sea dike representing polluted and reference conditions, respectively. The results of chemical analysis revealed that the concentrations of nonylphenol and heavy metals in water and sediment from the inner region of Lake Shihwa were significantly higher than those of reference sediments. After 48 and 96?h of exposure, 30 specimens of clams were sampled from each experimental condition, and concentrations of nonylphenol and metals were measured in clams, water, and sediments. Several biomarkers, including concentrations of metallothionein-like proteins, and activities of the antioxidant enzymes glutathione S-transferase and catalase were determined in clams to characterize the effects of polluted sediments to clams. After 96?h of exposure, R. philippinarum assimilated nonylphenol up to 71 times compared to initial concentrations. However, there was no apparent uptake of heavy metals into the clams. Additionally, antioxidant enzymes exhibited higher activities in clams exposed to the polluted sediment. The results of the present study with physiological responses in R. philippinarum suggest that sediment transportation caused by the operation of a tidal power plant in Lake Shihwa will have striking effects on benthic organisms in the adjacent coastal area.     

Occurrence and distribution of pharmaceuticals in wastewater from households, livestock farms, hospitals and pharmaceutical manufactures

Twenty-four pharmaceuticals were measured in wastewater from 12 municipal wastewater treatment plants (M-WWTPs), four livestock WWTPs (L-WWTPs), four hospital WWTPs (H-WWTPs) and four pharmaceutical manufacture WWTPs (P-WWTPs). The total concentration of pharmaceuticals in the influent samples was highest in the L-WWTPs followed by the P-WWTPs, H-WWTPs and M-WWTPs. The effluents had different patterns of pharmaceuticals than their corresponding influents because of the different fate of each compound in the WWTPs. Non-steroidal anti-inflammatory drugs (NSAIDs) were the most dominant in the influents from the M-WWTPs and P-WWTPs, while antibiotics were dominantly detected in the L-WWTP. In the H-WWTP influents, NSAIDs, caffeine and carbamazepine were dominant. In the P-WWTPs, the distribution of pharmaceuticals in the effluents varied with sampling sites and periods. The M-WWTP influents had the highest daily loads, while the effluents showed somewhat similar levels in all source types.