The new gold rush: fueling ethanol production while protecting water quality

Renewable fuel production, particularly grain-based ethanol, is expanding rapidly in the USA. Although subsidized grain-based ethanol may provide a competitively priced transportation fuel, concerns exist about potential environmental impacts. This contribution focuses on potential water quality implications of expanded grain-based ethanol production and potential impacts of perennial-grass-based cellulosic ethanol. Expanded grain-based ethanol will increase and intensify corn production. Even with recommended fertilizer and land conservation measures, corn acreage can be a major source of N loss to water (20-40 kg ha(-1) yr(-1)). A greater acreage of corn is estimated to increase N and P loss to water by 37% (117 million kg) and 25% (9 million kg), respectively, and measures to encourage adoption of conservation practices are essential to mitigate water quality impairments. Dried distiller's grains remaining after ethanol production from corn grain are used as animal feed and can increase manure P content and may increase N content. Cellulosic fuel-stocks from perennials such as switchgrass and woody materials have the potential to produce ethanol. Although production, storage, and handling of cellulosic materials and conversion technology are limitations, accelerating development of cellulosic ethanol has the potential to reduce dependence on grain fuel-stocks and provide water quality and other environmental benefits. All alternative fuel production technologies could have environmental impacts. There is a need to understand these impacts to help guide policy and help make programmatic and scientific decisions that avoid or mitigate unintended environmental consequences of biofuel production.     

Simulation of mixing depths incorporating the urban heat island effect

The main objective of this paper was to establish the effect of anthropogenic heat flux on the formation of mixing depth specially in urban areas. In this study an energy balance mixing depth model was developed for the simulation of mixing depth incorporating the heat island effect. To demonstrate the effect of heat island, mixing depths were simulated under two conditions. Under the first condition, hourly gridded anthropogenic heat flux and variant surface characteristics were considered, while under the second condition anthropogenic heat flux term was ignored and constant surface characteristics were considered throughout the modelling domain. The release of anthropogenic heat flux in the urban environment was found to be responsible for the growth of the unstable layer in the lower atmosphere even during the night. This resulted in higher mixing depth values in urban areas compared to the surrounding countryside. The maximum differential surfaces sensible heat flux between urban and rural areas was estimated as 130 W/m². From the simulation of mixing depth, it was revealed that the maximum increment in mixing depth in urban areas was 300 m due to the heat island effect. This increment in mixing depth in urban areas can provide an extra space for dilution and mixing of pollutants.     

Modelling mixing height from routinely measured surface and upper air meteorological data

A one‐dimensional model is developed for the estimation of hourly mixing height values from routinely measured upper air and surface meteorological data. A diagnostic technique is used in the model to calculate the convective and mechanically induced mixing height values under different atmospheric, and day and night‐time conditions. In the scheme, for the day‐time hours, the mixing height is determined as the larger of the convective and mechanically induced mixing height values. For the night‐time hours, only the mechanically induced mixing height values are considered. Three‐hourly mixing height values are modelled using once‐a‐day upper air temperature profile data (from radio‐sonde) and three‐hourly surface meteorological data. The spatial and temporal variation of mixing height are modelled in the Brisbane airshed and their relationship with the atmospheric stability, solar radiation and transport wind speed is developed.     

Effect of overlying water pH, dissolved oxygen, salinity and sediment disturbances on metal release and sequestration from metal contaminated marine sediments

Experiments were undertaken to examine the key variables affecting metal release and sequestration processes in marine sediments with metal concentrations in sediments reaching up to 86, 240, 700, and 3000 mg kg(-1) (dry weight) for Cd, Cu, Pb and Zn, respectively. The metal release and sequestration rates were affected to a much greater extent by changes in overlying water pH (5.5-8.0) and sediment disturbance (by physical mixing) than by changes in dissolved oxygen concentration (3-8 mg l(-1)) or salinity (15-45 practical salinity units). The physical disturbance of sediments was also found to release metals more rapidly than biological disturbance (bioturbation). The rate of oxidative precipitation of released iron and manganese increased as pH decreased and appeared to greatly influence the sequestration rate of released lead and zinc. Released metals were sequestered less rapidly in waters with lower dissolved oxygen concentrations. Sediments bioturbated by the benthic bivalve Tellina deltoidalis caused metal release from the pore waters and higher concentrations of iron and manganese in overlying waters than non-bioturbated sediments. During 21-day sediment exposures, T. deltoidalis accumulated significantly higher tissue concentrations of cadmium, lead and zinc from the metal contaminated sediments compared to controls. This study suggests that despite the fact that lead and zinc were most likely bound as sulfide phases in deeper sediments, the metals maintain their bioavailability because of the continued cycling between pore waters and surface sediments due to physical mixing and bioturbation.     

Cortical and endosomal structure of the marine sponge Stelletta grubii

The fine structure of the marine astrophorid sponge Stelletta grubii is described for the first time. The following new data are presented: spongin is present, choanocyte chambers are diplodal, intercellular symbiotic bacteria are numerous and unequally distributed in the cortex and endosome, and collagenous fibril bundles are associated with lophocyte activity and are not elastic fibers. The cortex contains numerous fibril bundles, fewer symbionts, very few cells, and transitional zones with higher archeocyte density near the surface and endosome. Limited phagocytosis of the bacterial symbionts is observed. This species appears to be dioecious and oviparous. These observations suggest that the enigmatic species Chondrosia reniformis is closely related to S. grubii and that it should be placed within or near the astrophorids. The rhizoids of the red alga Phyllophora palmettoides penetrate the sponge tissue without eliciting the development of a structurally specialized contact zone in the sponge matrix or of a limiting epithelium.     

Long-path FTIR Measurements of Volatile Organic Compounds in an Industrial Setting

A long-path Fourier transform spectrometer was used to make measurements of volatile organic compounds in an industrial complex in New Castle, Delaware as part of the Superfund Innovative Technology Evaluation (SITE) program. These data are compared to data taken with a whole-air canister technique. To provide an effective comparison the canisters were transported along the path for a 32-min period. For each FTIR spectrum, 256 interferograms were co-added over a 4-mln period. Eight individual spectra were then co-added to obtain the comparison data.     

Guidelines for copper in sediments with varying properties

A major weakness of sediment quality guidelines (SQGs) is their poor ability to predict how toxicity thresholds change for different sediment types. Using species sensitivity distributions (SSDs) of copper effects data, new guidelines were derived for copper in non-sulfidic marine sediments in which organic carbon (OC) and particle size strongly influence copper bioavailability. The derived SQGs varied in a predictable manner with changes in sediment particle size and organic carbon (OC), and were shown to offer a significant improvement on the existing ‘single value’ SQG. Adequate protection for all benthic organisms is expected to be achieved for a OC-normalised copper concentration of 3.5 mg Cu g⁻¹ OC in the <63 μm sediment fraction. For short-term exposures, the equivalent acute guideline is 11 mg < 63 μm Cu g⁻¹ OC. The new SQGs incorporate a high degree of conservatism owing to the use of copper-spiked sediments and laboratory-based bioassays that were expected to result in greater metal exposure of organisms to bioavailable copper than would be expected for field-contaminated sediments with similar total copper concentrations. SQGs that vary with sediment properties were prepared in an easily referenced tabular format.     

H NMR-based metabolomics investigation of Daphnia magna responses to sub-lethal exposure to arsenic,copper and lithium

Metal and metalloid contamination constitutes a major concern in aquatic ecosystems. Thus it is important to find rapid and reliable indicators of metal stress to aquatic organisms. In this study, we tested the use of ¹H nuclear magnetic resonance (NMR) – based metabolomics to examine the response of Daphnia magna neonates after a 48 h exposure to sub-lethal concentrations of arsenic (49 μg L⁻¹), copper (12.4 μg L⁻¹) or lithium (1150 μg L⁻¹). Metabolomic responses for all conditions were compared to a control using principal component analysis (PCA) and metabolites that contributed to the variation between the exposures and the control condition were identified and quantified. The PCA showed that copper and lithium exposures result in statistically significant metabolite variations from the control. Contributing to this variation was a number of amino acids such as: phenylalanine, leucine, lysine, glutamine, glycine, alanine, methionine and glutamine as well as the nucleobase uracil and osmolyte glycerophosphocholine. The similarities in metabolome changes suggest that lithium has an analogous mode of toxicity to that of copper, and may be impairing energy production and ionoregulation. The PCA also showed that arsenic exposure resulted in a metabolic shift in comparison to the control population but this change was not statistically significant. However, significant changes in specific metabolites such as alanine and lysine were observed, suggesting that energy metabolism is indeed disrupted. This research demonstrates that ¹H NMR-based metabolomics is a viable platform for discerning metabolomic changes and mode of toxicity of D. magna in response to metal stressors in the environment.     

Results from a national survey of Crown prosecutors and defense counsel on impaired driving in Canada: A “System Improvements” perspective

Introduction

This article summarizes the main findings from a study designed to examine the legal process in Canada as it applies to alcohol-impaired driving from the point of view of Crown prosecutors and defense counsel, and to identify evidentiary or procedural factors that may impact the legal process, the rights of the accused, and interactions of all parts in the legal process.

Method

The data in this study were collected by means of a survey that was mailed out to the population of Crown prosecutors and defense counsel in Canada. In total, 765 prosecutors and 270 defense lawyers or an estimated 33% of all Canadian prosecutors and 15% of defense lawyers completed and returned the questionnaire. The "systems improvement" paradigm was used to interpret the findings and draw conclusions. Such an approach acknowledges the importance of the context in which countermeasures are implemented and delivered and the structures or entities used to deliver countermeasures to a designated target group.

Results

Results on type of charges and breath alcohol concentration, caseload, case outcomes, case preparation time, conviction rate at trial and overall conviction rate, reasons for acquittals and time to resolve cases are described.

Discussion

The findings from this national survey suggest that there are important challenges within the criminal justice system that impede the effective and efficient processing of impaired driving cases. Some of these challenges occur as a function of practices and policies, while others occur as a function of legislation.

Impact on industry

This study illustrates that a "system improvements" approach that acknowledges the importance of all elements of the criminal justice system and the interaction between those elements, can be beneficial in overcoming the alcohol-impaired driving problem.