Modeling the dispersion of drilling muds using the bblt model: the effects of settling velocity

The benthic boundary layer transport (bblt) model was widely used in the Atlantic Canadian offshore region to assess the potential impact zones from drilling wastes discharges from offshore oil and gas drilling. The current version of the bblt uses a single-class settling velocity scenario, which may affect its performance, as settling velocity is size, shape, and material dependent. In this study, the effects of settling velocity on bblt predictions were assessed by replacing this single-class settling velocity scenario with a multi-class size-dependent settling velocity scenario. The new scenario was used in a hypothetical study to simulate the dispersion of barite and fine-grained drilling cuttings. The study showed that the effects of settling velocity on bblt predictions are spatial, temporal, and material dependent.     

Endosulfan is toxic to the reproductive health of male freshwater fish, <Emphasis Type="Italic">Cyprinion watsoni</Emphasis>

Endosulfan is an organochlorine pesticide that is toxic to aquatic life. Endosulfan might hamper the reproductive health of indigenous fish in agricultural areas of Pakistan where this pesticide is sprayed widely. The aim of the current study is to investigate the toxic effects of endosulfan on selected reproductive parameters of male freshwater fish, Cyprinion watsoni. Two concentrations of endosulfan (0.5 and 1 ppb for 30 days exposure) were tested for their effects on body weight, body length, and testicular weight, length, and width. Testicular testosterone was assayed from tissue extracts using enzyme immunoassay (EIA). A significant increase in the mortality rate was observed in both treated groups during both spawning and quiescent seasons. The overall behavior of fish in the aquarium was normal in all control and treated groups. However, the treated fish exhibited anxiety after treatment with endosulfan. The body weight and length, and testicular weight, length and width were not significantly different to the control group. The testicular testosterone concentrations were significantly lower in both endosulfan-treated groups compared to the control. The decrease was dose-dependent, with a significant difference between the two treated groups. The histomorphological results demonstrated various testicular alterations in the treated groups. These alterations included an increase in interlobular areas and clumping patterns in spermatocytes/spermatids. Because spermatids eventually differentiate into sperms, their low count will directly result in lower sperm count. Taken together, these results suggest that endosulfan is a toxicant that at least disturbs testosterone levels (possibly others) and negatively impacts the reproductive health of male freshwater fish.     

Potential Fluoride Contamination in the Drinking Water of Naranji Area, Northwest Frontier Province, Pakistan

The drinking water of Naranji village and surrounding areas of the NorthWest Frontier Province (NWFP), Pakistan, was analyzed for its fluoride content. The fluoride content of water samples from the springs in the Naranji village goes up to 13.52 mg kg(-1), which exceeds the permissible limit (1.5 mg kg(-1)) set by the World Health Organization (WHO). This study explores the source of fluoride contamination and attributes it to the alkaline rocks of the Ambela granitic complex and the Koga complex. The low-lying areas towards the south have a fluoride content within the permissible limit. The Naranji area therefore needs urgent remedial measures.     

HYDROLOGIC UNCERTAINTY MEASURE AND NETWORK DESIGN1

ABSTRACT: This paper presents a simple methodology, using the entropy concept, to estimate regional hydro logic uncertainty and information at both gaged and ungaged grids in a basin. The methodology described in this paper is applicable for (a) the selection of the optimum station from a dense network, using maximization of information transmission criteria, and (b) expansion of a network using data from an existing sparse network by means of the information interpolation concept and identification of the zones from minimum hydrologic information. The computation of single and joint entropy terms used in the above two cases depends upon single and multivariable probability density functions. In this paper, these terms are derived for the gamma distribution. The derived formulation for optimum hydrologic network design was tested using the data from a network of 29 rain gages on Sleeper River Experimental Watershed. For the purpose of network reduction, the watershed was divided into three subregions, and the optimum stations and their locations in each subregion were identified. To apply the network expansion methodology, only the network consisting of 13 stations was used, and feasible triangular elements were formed by joining the stations. Hydrologic information was calculated at various points on the line segments, and critical information zones were identified by plotting information contours. The entropy concept used in this paper, although derived for single and bivaviate gamma distribution, is general in type and can easily be modified for other distributions by a simple variable transformation criterion.     

Succinate-bonded pullulan: An efficient and reusable super-sorbent for cadmium-uptake from spiked high-hardness groundwater

Chemically modified pullulan was evaluated for its sorption efficiency and selectivity to remove cadmium(Cd) from spiked high-hardness groundwater(GW). Pullulan esterified with succinic anhydride using dimethylaminopyridine showed a fairly high degree of substitution value as confirmed by1 H NMR spectroscopy. Pullulan succinate(Pull-Suc) was converted into the sodium salt(Pull-Suc-Na). The effect of contact time(5–200 min) and p H(2–8) on Cd-uptake by the sorbent(Pull-Suc-Na) was investigated. The sorbent showed more than 90% Cd-removal in first 15 min from distilled water(DW) and GW solution,respectively. Comparison of Pull-Suc-Na with other polysaccharidal sorbents suggested its high efficiency(DW 476.2 mg/g and GW 454.5 mg/g) and selectivity for the removal of Cd by an ion exchange mechanism, which is further supported by the negative Gibbs free energy values calculated from Langmuir isotherms. A Langmuir isotherm kinetic model provided the best fit for the sorption of Cd using Pull-Suc-Na. The sorbent showed a negligible decrease in Cd-uptake over three regeneration cycles. The thermal stability testing of the sorbents indicated that Pull-Suc-Na(sorbent) is more stable than Pull-Suc.     

Recent advances in SO2, NOx, and O3 personal monitoring

Since the air pollution as measured by stationary monitoring stations is a poor indicator of the population exposure, personal monitors are indispensible to health effects studies. This article reviews the current research on the development of personal monitors. Although most of the analytical methods reviewed in this study appear to be sensitive to the levels of the target pollutants NO₂, SO₂, and O₃ generally encountered in indoor and outdoor air, they lack the desired performance characteristics for a personal monitoring device, such as user safety and ease of operation, weight, and maintenance. Electrochemical transducers/sensors, which have not yet been exploited, are attractive candidates for the application to personal monitoring. This technique has an added feature of generating real-time measurements. A few research models and commercially attractive devices that can be used in field studies are included.     

Removal of Fe(II) from the wastewater of a galvanized pipe manufacturing industry by adsorption onto bentonite clay

Bentonite clay has been used for the adsorption of Fe(II) from aqueous solutions over a concentration range of 80-200 mg/l, shaking time of 1-60 min, adsorbent dosage from 0.02 to 2 g and pH of 3. The process of uptake follows both the Langmuir and Freundlich isotherm models and also the first-order kinetics. The maximum removal (>98%) was observed at pH of 3 with initial concentration of 100 mg/l and 0.5 g of bentonite. The efficiency of Fe(II) removal was also tested using wastewater from a galvanized pipe manufacturing industry. More than 90% of Fe(II) can be effectively removed from the wastewater by using 2.0 g of the bentonite. The effect of cations (i.e. zinc, manganese, lead, cadmium, nickel, cobalt, chromium and copper) on the removal of Fe(II) was studied in the concentration range of 10-500 mg/l. All the added cations reduced the adsorption of Fe(II) at high concentrations except Zn. Column studies have also been carried out using a certain concentration of wastewater. More than 99% recovery has been achieved by using 5 g of the bentonite with 3M nitric acid solution.     

An overview and analysis of site remediation technologies

This paper presents an analysis of the site restoration techniques that may be employed in a variety of contaminated site cleanup programs. It is recognized that no single specific technology may be considered as a panacea for all contaminated site problems. An easy-to-use summary of the analysis of the important parameters that will help in the selection and implementation of one or more appropriate technologies in a defined set of site and contaminant characteristics is also included.     

Dissipation of pentachlorophenol in the aerobic-anaerobic interfaces established by the rhizosphere of rice ( Oryza sativa L.) root

Phytoremediation is an emerging technology for the detoxification and remediation of organic pollutants such as pentachlorophenol (PCP). To investigate the dissipation behavior of PCP in the aerobic-anaerobic interfaces established by the rhizosphere of rice ( L.) root, a glasshouse experiment was conducted using a specially designed rhizobox. The possible biogeochemical mechanisms were also studied through illustration of the dynamic behavior of important electron acceptors and donors that are potentially involved in the reductive dechlorination and aerobic catabolism processes of PCP. The soil was spiked with 20 ± 0.25 and 45 ± 0.25 mg of PCP kg soil. Soil in the rhizobox was divided into five different compartments at various distances from the root surface. Maximum dissipation of PCP in planted soil was observed at 3-mm distance from the root zone as well as rapid changes in concentrations of sulfate, chloride, nitrate, and ammonium at the same distance from the root. In contrast, in the unplanted soil, no difference was observed in the PCP concentration with increasing distance. After 45 d, a significantly higher concentration of PCP was degraded in planted soil compared with unplanted soil. In the unplanted microcosms, about 45% of the initial PCP was lost at both low and high added rates, respectively. This was, proportionately, a significantly smaller percentage compared with the planted rhizosphere (an average of 66 and 64.5%, respectively). Moreover, the correlations of PCP dissipation with SO, NO, and Fe were significantly negative, while the correlations of PCP dissipation with NH, Fe, and Cl were significantly positive. This suggested the oxidization of soil constituents can inhibit aerobic catabolism of PCP by consuming O, and the reduction of soil constituents can inhibit anaerobic reductive dechlorination of PCP. Therefore, the significance of the rhizosphere in phytoremediation of chlorinated compounds such as PCP differs significantly between wetland and rainfed systems.     

Impact of economic freedom on air pollution: configuration analysis of Asia-Pacific region

Environmental Science and Pollution Research - Air pollution brings uncountable serious influences on human life during the last decade. This study is an attempt to compare economic liberalism with...