Decomposition of mixed plastics consisting of polypropylene and polyethylene terephthalate into oils over titania/silica catalysts

The catalytic decomposition of mixed plastics consisting of polypropylene (PP) and polyethylene terephthalate (PET) has been investigated over titania/silica catalysts at 698 K. The yield of oil produced was about 70%, and the large amounts of C₁₈₊ hydrocarbons this contained was from the aromatics in PET. Gas was also produced, including C₃–C₅ hydrocarbons. The carbon-number fractions in the oil was influenced by the PET/(PP + PET) ratios and the catalyst weight. The titania/silica catalysts could be used repeatedly, and after they had been fouled, could be regenerated. From the Fourier Transform Infrared (FT–IR) spectroscopic data of adsorbed pyridine on the catalyst surface, most of the acid sites of the titania/silica catalysts were found to be Lewis sites where the hydride abstracted from PP pyrolysates react with PET pyrolysates to form oil and gas. Received: July 19, 2000 / Accepted: October 20, 2000     

Determination of the human cytochrome P450 monooxygenase catalyzing the enantioselective oxidation of 2,2′,3,5′,6-pentachlorobiphenyl (PCB 95) and 2,2′,3,4,4′,5′,6-heptachlorobiphenyl (PCB 183)

2,2′,3,5′,6-Pentachlorobiphenyl (PCB 95) and 2,2′,3,4,4′,5′,6-heptachlorobiphenyl (PCB 183) possess axial chirality and form the aS and aR enantiomers. The enantiomers of these congeners have been reported to accumulate in the human body enantioselectively via unknown mechanisms. In this study, we determined the cytochrome P450 (CYP) monooxygenase responsible for the enantioselective oxidization of PCB 95 and PCB 183, using a recombinant human CYP monooxygenase. We evaluated 13 CYP monooxygenases, namely CYP1A1, CYP1A2, CYP1B1, CYP2A6, CYP2B6, CYP2C8, CYP2C19, CYP2E1, CYP2J2, CYP3A4, CYP3A5, CYP4F2, and aromatase (CYP19), and revealed that CYP2A6 preferably oxidizes aS-PCB 95 enantioselectively; however, it did not oxidize PCB 183. The enantiomer composition was elevated from 0.5 (racemate) to 0.54. In addition, following incubation with CYP2A6, the enantiomer fraction (EF) of PCB 95 demonstrated a time-dependent increase.     

Ultra-high efficiency photovoltaic cells for large scale solar power generation

The primary targets of our project are to drastically improve the photovoltaic conversion efficiency and to develop new energy storage and delivery technologies. Our approach to obtain an efficiency over 40% starts from the improvement of III-V multi-junction solar cells by introducing a novel material for each cell realizing an ideal combination of bandgaps and lattice-matching. Further improvement incorporates quantum structures such as stacked quantum wells and quantum dots, which allow higher degree of freedom in the design of the bandgap and the lattice strain. Highly controlled arrangement of either quantum dots or quantum wells permits the coupling of the wavefunctions, and thus forms intermediate bands in the bandgap of a host material, which allows multiple photon absorption theoretically leading to a conversion efficiency exceeding 50%. In addition to such improvements, microfabrication technology for the integrated high-efficiency cells and the development of novel material systems that realizes high efficiency and low cost at the same time are investigated.     

Concentration levels and congener profiles of polychlorinated biphenyls, pentachlorobenzene, and hexachlorobenzene in commercial pigments

The concentration levels and congener profiles of polychlorinated biphenyls (PCBs), pentachlorobenzene (PeCBz), and hexachlorobenzene (HxCBz) were assessed in commercially available organic pigments. Among the azo-type pigments tested, PCB-11, which is synthesized from 3,3′-dichlorobendizine, and PCB-52, which is synthesized from 2,2′,5,5′-tetrachlorobendizine, were the major congeners detected. It is speculated that these were byproducts of chlorobendizine, which has a very similar structure. The total PCB concentrations in this type of pigment ranged from 0.0070 to 740 mg/kg. Among the phthalocyanine-type pigments, highly chlorinated PCBs, mainly composed of PCB-209, PeCBz, and HxCBz were detected. Their concentration levels ranged from 0.011 to 2.5 mg/kg, 0.0035 to 8.4 mg/kg, and 0.027 to 75 mg/kg, respectively. It is suggested that PeCBz and HxCBz were formed as byproducts and converted into PCBs at the time of synthesizing the phthalocyanine green. For the polycyclic-type pigments that were assessed, a distinctive PCB congener profile was detected that suggested an impact of their raw materials and the organic solvent used in the pigment synthesis. PCB pollution from PCB-11, PCB-52, and PCB-209 pigments is of particular concern; therefore, the monthly variations in atmospheric concentrations of these pollutants were measured in an urban area (Sapporo city) and an industrial area (Muroran city). The study detected a certain level of PCB-11, which is not included in PCB technical mixtures, and revealed continuing PCB pollution originating from pigments in the ambient air.     

水中汞监测存在的问题与解决办法

利用中日合作 (JICA)项目资金 ,对测定地表水中汞存在的主要问题 ,如水样的保存和处理 ,水样的消解 ,测汞的冷原子吸收法和原子荧光法等进行了研究。通过对 33个环境监测站的样品考核 ,发现测定结果与标准值相比 ,偏高的数据达 75 %以上。提出了用 1%H2 SO4 和 0 1%K2 Cr2 O7保存水样最好 ;高锰酸钾 -过硫酸钾消解法适用于消解含有机物、悬浮物和组成复杂的废水样 ,高锰酸钾 -硫酸消解法适用于消解被有机物轻度污染的废水 ,溴酸钾 -溴化钾消解法适用于消解地表水和含较少有机物的生活污水及工业废水。研究表明 :尤以硫酸 -高锰酸钾 -过硫酸钾消解体系消解地表水和废水效果良好。对冷原子吸收法和原子荧光法中影响汞测定的因素 ,如空白值高、干扰物的消除、载气种类和流量、反应瓶体积和气液比以及反应时间等提出了详尽的解决方法     

Recycling or chemical stabilization? Greenhouse gas emissions from treatment of waste containing mercury under the Minamata Convention

Journal of Material Cycles and Waste Management - Appropriate management of waste containing mercury is important. However, reducing greenhouse gases (GHGs) associated with this process is equally...