Green renewal: incorporating environmental factors in equipment replacement decisions under technological change

Equipment replacement is a fact of life in every industrial setting, and this paper seeks to answer the question: How can firms and policy makers effectively balance environmental and economic concerns with respect to replacement decisions? A replacement model which includes both economic and environmental factors is presented. One must decide whether to keep the existing technology, upgrade to a newer technology which produces a smaller environmental burden, or wait for an even newer, cleaner technology which may be introduced soon. More than 25 000 test problems are solved, examining different objectives and covering a wide range of applications. Including environmental costs does not lead to a consistent increase in the adoption of cleaner technologies; however, including incentives to adopt newer technologies does. When one accounts for the environmental impact of producing new equipment and disposing of old equipment, earlier adoption of new technologies actually increases the total environmental burden in some cases.     

Carbon accumulation through ecosystem recovery

A market has emerged for carbon sequestered through reforestation. The opportunity to restore ecosystems through this market rather than establish plantations is demonstrated by an Australian case study. In the state of Queensland there are vast areas that have been cleared relatively recently and could be restored to ecosystems with high resilience and important biodiversity values with appropriate management. In order to foster opportunities for carbon accumulation through ecosystem recovery spatially explicit information on sequestration rates, management recommendations, and clear definitions of ancillary biodiversity benefits need to be defined.     

Impacts of “metals” on human health: a comparison between nine different methodologies for Life Cycle Impact Assessment (LCIA)

This paper looks into the differences and uncertainties in determining the impact of “metals’” emissions on human health, in Life Cycle Impact Assessment (LCIA). Metals are diverse substances, with different properties and characteristics, considered important in LCIA because of their toxicity to humans and ecosystems. First, we defined a list of the most significant metals in terms of impacts on human health. This was done according to precise criteria accounting for both physical and toxic properties of the metals. Second, we performed an LCIA on different key processes using various existing LCIA methodologies and including also USEtox: the recently developed consensus-model for LCIA. Last, we compared the results in relative terms using a contribution analysis. The analysis showed poor or no agreement between the methods: the relative contribution of each metal and of the metals in total to the total impact on human health changes greatly according to the LCIA method used. These differences are due mainly to the number of metals included in each method and to the technique used to calculate the characterization factors. Results obtained with USEtox show no apparent correlation with results calculated with other methods. At present time USEtox is recommended as the best model for LCIA on human toxicity, but mainly because of the large consensus behind it, because its uncertainties regarding metals are still high. The study gives a good and simple overview regarding the way different methods address the impact assessment for metals, and helps in the interpretation of LCIA results for actual LCA studies where metal emissions are involved.     

Immobilized Fe (III)-doped titanium dioxide for photodegradation of dissolved organic compounds in water

Photocatalytic degradation of dissolved organic carbon (DOC) by utilizing Fe(III)-doped TiO₂ at the visible radiation range is hereby reported. The photocatalyst was immobilized on sintered glass frits with the coating done by wet method, calcinated at 500 °C and then applied in a photodegradation reactor. The addition of a transition metal dopant, Fe(III), initiated the red shift which was confirmed by UV–Vis spectroscopy, and the photocatalyst was activated by visible radiation. X-ray diffraction patterns showed that Fe(III) doping had an effect on the crystallinity of the photocatalysts. Mixtures of DOC and associated coloured solutions were degraded in first-order kinetics, showing that the degradation process was not dependent on intermediates or other species in solution. A reactor with a catalyst coating area of 12.57 cm² was able to degrade 0.623 mg of the dissolved material per minute. Exposure of the reactor to hostile acidic conditions and repeated use did not compromise its efficiency. It was observed that the reactor regenerates itself in the presence of visible light, and therefore, it can be re-used for more than 100 runs before the performance dropped to <95 %. The results obtained indicate that the photocatalyst reactor has a great potential of application for use in tandem with biosorbent cartridges to complement water purification methods for domestic consumption.     

Recycling and reuse of waste from electricity distribution networks as reinforcement agents in polymeric composites

Of the waste generated from electricity distribution networks, wooden posts treated with chromated copper arsenate (CCA) and ceramic insulators make up the majority of the materials for which no effective recycling scheme has been developed. This study aims to recycle and reuse this waste as reinforcement elements in polymer composites and hybrid composites, promoting an ecologically and economically viable alternative for the disposal of this waste. The CCA wooden posts were cut, crushed and recycled via acid leaching using 0.2 and 0.4 N H₂SO₄ in triplicate at 70 °C and then washed and dried. The ceramic insulators were fragmented in a hydraulic press and separated by particle size using a vibrating sieve. The composites were mixed in a twin-screw extruder and injected into the test specimens, which were subjected to physical, mechanical, thermal and morphological characterization. The results indicate that the acid treatment most effective for removing heavy metals in the wood utilizes 0.4 N H₂SO₄. However, the composites made from wood treated with 0.2 N H₂SO₄ exhibited the highest mechanical properties of the composites, whereas the use of a ceramic insulator produces composites with better thermal stability and impact strength. This study is part of the research and development project of ANEEL (Agência Nacional de Energia Elétrica) and funded by CPFL (Companhia Paulista de Força e Luz).     

A comparative assessment of waste incinerators in the UK

The uptake in Europe of Energy from Waste (EfW) incinerator plants has increased rapidly in recent years. In the UK, 25 municipal waste incinerators with energy recovery are now in operation; however, their waste supply chains and business practices vary significantly. With over a hundred more plant developments being considered it is important to establish best business practices for ensuring efficient environmental and operational performance. By reviewing the 25 plants we identify four suitable case study plants to compare technologies (moving grate, fluidised bed and rotary kiln), plant economics and operations. Using data collected from annual reports and through interviews and site visits we provide recommendations for improving the supply chain for waste incinerators and highlight the current issues and challenges faced by the industry. We find that plants using moving grate have a high availability of 87–92%. However, compared to the fluidised bed and rotary kiln, quantities of bottom ash and emissions of hydrogen chloride and carbon monoxide are high. The uptake of integrated recycling practices, combined heat and power, and post incineration non-ferrous metal collections needs to be increased among EfW incinerators in the UK. We conclude that one of the major difficulties encountered by waste facilities is the appropriate selection of technology, capacity, site, waste suppliers and heat consumers. This study will be of particular value to EfW plant developers, government authorities and researchers working within the sector of waste management.     

Experimental Verification of Diffusion Battery Theory

The diffusion battery, an assembly of circular tubes or rectangular channels, is one of the best devices available for measuring the size and size distribution of submicron aerosols in the diameter range 0.002 to 0.2 µ m. The performance of these batteries is known from molecular diffusion theory, but until now has not been checked experimentally in this size range because of the lack of the necessary monodisperse aerosols. Experimental measurements on singly charged monodisperse aerosols from 0.01 µm to 0.1 µ m are described using a General Electric and a Pollak condensation nucleus counter to measure the aerosol penetration through the stages of a set of portable diffusion batteries in series. Particle sizes in the range tested could be selected at will by adjusting the voltage of an electric mobility classifier. The fraction of aerosol of a given size passing through each battery stage was found to agree closely with the penetration calculated from molecular diffusion theory for that size. This shows that the theory is correct and confirms that the aerosol produced by the electric mobility classifier was monodisperse. In addition, it was found that the difference in penetration between a charged versus a neutralized aerosol was insignificant except for the smallest aerosols used.     

Fine Particle (PM25) Measurement Methodology,Quality Assurance Procedures,and Pilot Results of the EXPOLIS Study

ABSTRACT

EXPOLIS is a European multicenter (Athens, Basel, Grenoble, Helsinki, Milan, and Prague) air pollution exposure study. It is the first international, population-based, large-scale study, where personal exposures to PM_{2 5} aerosol particles (together with volatile organic compounds and carbon monoxide) are being monitored. EXPOLIS is performed in six different centers across Europe, the sampled aerosol concentrations vary greatly, and the mi-croenvironmental samples are not collected with the same equipment as the personal samples. Therefore careful equipment selection, methods development and testing, and thorough quality assurance and quality control (QA & QC) procedures are essential for producing reliable and comparable PM_2.5 data. This paper introduces the equipment, the laboratory test results, the pilot results, the standard operating procedures, and the QA & QC procedures of EXPOLIS. Test results show good comparability and repeatability between personal and microenvironmen-tal monitors for PM2.5 at different concentration levels measured across Europe in EXPOLIS centers.