Play behavior and exercise in young ponies (Equus caballus L.)

Summary Play behavior of young ponies accounted for two-thirds of total running exercise and over 95% of all high-speed turns in ten animals from birth to age six weeks. The classical supposition, never previously demonstrated, that most exercise of young mammals occurs in play, is confirmed in these subjects.     

The environment as a factor of production

This paper uses firm-level data about electric utilities to develop an empirical model of how electric utilities use and bank SO₂ pollution permits under the Acid Rain Program. The empirical model considers emissions, fuels, and labor as variable inputs with quasi-fixed stocks of permits and capital. Consequently, substitution possibilities between the environment and other production factors can be measured and tested. The results reveal substantial substitution between emissions, permit stocks, capital, fuel, and labor. The empirical findings also indicate that firms bank permits primarily as a hedge against uncertainty and for other firm-specific reasons. Overall, the results suggest that cap-and-trade approaches can reduce the cost of meeting environmental goals by providing a mechanism for addressing regulatory and market risks and by signaling an appropriate price for factor use, especially irreversible capital investments.     

Spatial characteristics of fine particulate matter: identifying representative monitoring locations in Seattle, Washington

This study investigates how PM2.5 varies spatially and how these spatial characteristics can be used to identify potential monitoring sites that are most representative of the overall ambient exposures to PM2.5 among susceptible populations in the Seattle, WA, area. Data collected at outdoor sites at the homes of participants of a large exposure assessment study were used in this study. Harvard impactors (HIs) were used at 40 outdoor sites throughout the Seattle metropolitan area. Up to six sites at a time were monitored for 10 consecutive 24-hr average periods. A fixed-effect analysis of variance (ANOVA) model that included date and location effects was used to analyze the spatial variability of outdoor PM2.5 concentrations. Both date and location effects were shown to be highly significant, explaining 92% of the variability in outdoor PM2.5 measurements. The day-to-day variability was 10 times higher than the spatial variability between sites. The site mean square was more than twice the error mean square, showing that differences between sites, while modest, are potentially an important contribution to measurement error. Variances of the model residuals and site effects were examined against spatial characteristics of the monitoring sites. The spatial characteristics included elevation, distance from arterials, and distance from major PM2.5 point sources. Results showed that the most representative PM2.5 sites were located at elevations of 80-120 m above sea level, and at distances of 100-300 m from the nearest arterial road. Location relative to industrial PM2.5 sources is not a significant predictor of residential outdoor PM2.5 measurements. Additionally, for sites to be representative of the average population exposures to PM2.5 among those highly susceptible to the health effects of PM2.5, areas of high elderly population density were considered. These representative spatial characteristics were used as multiple, overlapping criteria in a Geographic Information System (GIS) analysis to determine where the most representative sites are located.     

Conceptual and numerical model of uranium(VI) reductive immobilization in fractured subsurface sediments

A conceptual model and numerical simulations of bacterial U(VI) reduction in fractured subsurface sediments were developed to assess the potential feasibility of biomineralization at the fracture/matrix interface as a mechanism for immobilization of uranium in structured subsurface media. The model envisions flow of anaerobic groundwater, with or without acetate as an electron donor for stimulation of U(VI) reduction by dissimilatory metal-reducing bacteria (DMRB), within mobile macropores along a one-dimensional flow path. As the groundwater moves along the flow path, U(VI) trapped in the immobile mesopore and micropore domains (the sediment matrix) becomes desorbed and transferred to the mobile macropores (fractures) via a first-order exchange mechanism. By allowing bacterial U(VI) reduction to occur in the mesopore domain (assumed to account for 12% of total sediment pore volume) according to experimentally-determined kinetic parameters and an assumed DMRB abundance of 10(7) cells per cm3 bulk sediment (equivalent to 4 mg of cells per dm3 bulk sediment), the concentration of U(VI) in the macropore domain was reduced ca. 10-fold compared to that predicted in the absence of mesopore DMRB activity after a 6-month simulation period. The results suggest that input of soluble electron donors over a period of years could lead to a major redistribution of uranium in fractured subsurface sediments, converting potentially mobile sorbed U(VI) to an insoluble reduced phase (i.e. uraninite) in the mesopore domain that is expected to be permanently immobile under sustained anaerobic conditions.     

Non-aqueous phase liquid spreading during soil vapor extraction

Many non-aqueous phase liquids (NAPLs) are expected to spread at the air-water interface, particularly under non-equilibrium conditions. In the vadose zone, this spreading should increase the surface area for mass transfer and the efficiency of volatile NAPL recovery by soil vapor extraction (SVE). Observations of spreading on water wet surfaces led to a conceptual model of oil spreading vertically above a NAPL pool in the vadose zone. Analysis of this model predicts that spreading can enhance the SVE contaminant recovery compared to conditions where the liquid does not spread. Experiments were conducted with spreading volatile oils hexane and heptane in wet porous media and capillary tubes, where spreading was observed at the scale of centimeters. Within porous medium columns up to a meter in height containing stagnant gas, spreading was less than ten centimeters and did not contribute significantly to hexane volatilization. Water film thinning and oil film pinning may have prevented significant oil film spreading, and thus did not enhance SVE at the scale of a meter. The experiments performed indicate that volatile oil spreading at the field scale is unlikely to contribute significantly to the efficiency of SVE.     

Radiocarbon content of synthetic and natural semi-volatile halogenated organic compounds

Some halogenated organic compounds, such as polychlorinated biphenyls (PCBs), polychlorinated dibenzo-p-dioxins (PCDDs) and polybrominated diphenyl ethers (PBDEs), have been suggested to have natural sources but separating these compounds from their commercially synthesized counterparts is difficult. Molecular-level 14C analysis may be beneficial since most synthetic compounds are manufactured from petrochemicals (14C-free) and natural compounds should have "modern" or "contemporary" 14C levels. As a baseline study, we measured, for the first time, the 14C abundance in commercial PCB and PBDE mixtures, a number of organochlorine pesticides, as well as one natural product 2-(3',5'-dibromo-2'-methoxyphenoxy)-3,5-dibromoanisole. The latter compound was isolated from a marine sponge and is similar in structure to a PBDE. All of the synthetic compounds were 14C-free except for the pesticide toxaphene. which had a modern 14C abundance, as did the brominated natural compound. The result for toxaphene was not surprising since it was commercially synthesized by the chlorination of camphene derived from pine trees. These results suggest that measuring the 14C content of halogenated organic compounds may be quite useful in establishing whether organic compounds encountered in the environment have natural or synthetic origins (or both) provided that any synthetic counterparts derive from petrochemical feedstock.     

Real-time indoor and outdoor measurements of black carbon in an occupied house: an examination of sources

Black carbon (BC) was measured every 5 min for two years (May 1998-May 2000) inside and immediately outside a northern Virginia house (suburban Washington, DC) occupied by two nonsmokers. Two aethalometers, which measure BC by optical transmission through a quartz fiber tape, were employed indoors and outdoors. Meteorological parameters were obtained on an hourly basis from nearby Dulles airport. Indoor activities were recorded to identify indoor sources such as combustion activities, which occurred 9% of the time during the first year and 4% of the time during the second year. At times without indoor sources, indoor/outdoor BC ratios averaged 0.53 in the first year and 0.35 in the second year. The main outdoor source of BC was the general regional background, contributing 83-84% of the total during each of the two years. Morning rush hour traffic contributed 8-9% of the total BC. An evening peak in the fall and winter, thought to include contributions from wood burning, was responsible for approximately 8% of the annual average BC concentration. The main indoor sources of BC were cooking and candle burning, contributing 16 and 31%, respectively, of the annual average indoor concentrations in the two years. Relative humidity (RH) affected the outdoor aethalometer in both years. An artifact associated with the tape advance was noted for the aethalometer, but a correction factor was developed that reduced the associated error by a factor of 2.     

Examination of factors associated with use rates after transition from a universal to partial motorcycle helmet use law

Objectives: Motorcycle riders account for a disproportionately high number of traffic injuries and fatalities compared to occupants of other vehicle types. Though research has demonstrated the benefits of helmet use in preventing serious and fatal injuries in the event of a crash, helmet use has remained relatively stable in the United States, where the most recent national estimates show a 64% use rate. Use rates have been markedly lower among those states that do not have a universal helmet law for all riders. In 2012, the state of Michigan repealed its longstanding mandatory helmet use law. In order to gain insights as to the effects of this legislative change, a study was conducted to examine short-term changes in helmet use and identify factors associated with use rates.

Methods: A statewide direct observation survey was conducted 1 year after the transition from a universal helmet law to a partial helmet law. A random parameters logistic regression model was estimated to identify motorcyclist, roadway, and environmental characteristics associated with helmet use. This modeling framework accounts for both intravehicle correlation (between riders and passengers on the same motorcycle) as well as unobserved heterogeneity across riders due to important unobserved factors.

Results: Helmet use was shown to vary across demographic segments of the motorcyclist population. Use rates were higher among Caucasian riders, as well as among those age 60 and above. No significant difference was observed between male and female riders. Use was also found to vary geographically, temporally, and with respect to various environmental characteristics. Geographically, helmet use rates tended to be correlated with historical restraint use trends, which may be reflective of riding environment and general differences in the riding population. To this end, rates were also highly variable based upon the type of motorcycle and whether the motorcyclist was wearing high-visibility gear.

Conclusions: The study results demonstrate the short-term reduction in helmet use following transition from a universal to partial motorcycle helmet law. The reduction in use is somewhat less pronounced than has been experienced in other states, which may be reflective of general differences among Michigan motorcyclists because the state has also generally exhibited higher use rates of seat belts and other forms of occupant protection. The study results also highlight potential target areas for subsequent education and public awareness initiatives aimed at increasing helmet use.     

A multidisciplinary study of archaeological grape seeds

We report here the first integrated investigation of both ancient DNA and proteins in archaeobotanical samples: medieval grape (Vitis vinifera L.) seeds, preserved by anoxic waterlogging, from an early medieval (seventh–eighth century A.D.) Byzantine rural settlement in the Salento area (Lecce, Italy) and a late (fourteenth–fifteenth century A.D.) medieval site in York (England). Pyrolysis gas chromatography mass spectrometry documented good carbohydrate preservation, whilst amino acid analysis revealed approximately 90% loss of the original protein content. In the York sample, mass spectrometry-based sequencing identified several degraded ancient peptides. Nuclear microsatellite locus (VVS2, VVMD5, VVMD7, ZAG62 and ZAG79) analysis permitted a tentative comparison of the genetic profiles of both the ancient samples with the modern varieties. The ability to recover microsatellite DNA has potential to improve biomolecular analysis on ancient grape seeds from archaeological contexts. Although the investigation of five microsatellite loci cannot assign the ancient samples to any geographic region or modern cultivar, the results allow speculation that the material from York was not grown locally, whilst the remains from Supersano could represent a trace of contacts with the eastern Mediterranean.     

Cover crop effects on nitrous oxide emission from a manure-treated Mollisol

Agriculture contributes 40–60% of the total annual N₂O emissions to the atmosphere. Development of management practices to reduce these emissions would have a significant impact on greenhouse gas levels. Non-leguminous cover crops are efficient scavengers of residual soil NO₃, thereby reducing leaching losses. However, the effect of a grass cover crop on N₂O emissions from soil receiving liquid swine manure has not been evaluated. This study investigated: (i) the temporal patterns of N₂O emissions following addition of swine manure slurry in a laboratory setting under fluctuating soil moisture regimes; (ii) assessed the potential of a rye (Secale cereale L.) cover crop to decrease N₂O emissions under these conditions; and (iii) quantified field N₂O emissions in response to either spring applied urea ammonium nitrate (UAN) or different rates of fall-applied liquid swine manure, in the presence or absence of a rye/oat winter cover crop. Laboratory experiments investigating cover crop effects N₂O emissions were performed in a controlled environment chamber programmed for a 14 h light period, 18 °C day temperature, and 15 °C night temperature. Treatments with or without a living rye cover crop were treated with either: (i) no manure; (ii) a phosphorus-based manure application rate (low manure): or (iii) a nitrogen-based manure application rate (high manure). We observed a significant reduction in N₂O emissions in the presence of the rye cover crop. Field experiments were performed on a fine-loamy soil in Central Iowa from October 12, 2005 to October 2, 2006. We observed no significant effect of the cover crop on cumulative N₂O emissions in the field. The primary factor influencing N₂O emission was N application rate, regardless of form or timing. The response of N₂O emission to N additions was non-linear, with progressively more N₂O emitted with increasing N application. These results indicate that while cover crops have the potential to reduce N₂O emissions, N application rate may be the overriding factor.