ANALYZING CORRELATIONS BETWEEN STREAM AND WATERSHED ATTRIBUTES1

ABSTRACT: Bivariate correlation analysis has been widely used to explore relationships between stream and watershed attributes that have all been measured on the same set of watersheds or sampling locations. Researchers routinely test H₀: ρ= 0 for each correlation in a large table and then go on to discuss only those that are declared “significant.” Such test results are inaccurate because no allowance is made for multiple testing, and also because the tests are not mutually independent. This paper reviews the Bonferroni approach to controlling the overall error rate in multiple testing and shows how the approach becomes impractical for large correlation tables. The Hotelling/Williams test is introduced for comparing two dependent correlations that share a variable, and numerical constraints for two such correlations are illustrated. References are also given for testing other hypothesized patterns among dependent correlations, and links to dependent correlation software are provided. The methods are illustrated for watershed and stream variables sampled in 23 small agricultural watersheds of the Willamette Valley, Oregon.     

Deposition and Fate of Lead in a Forested Catchment, Lesni Potok, Central Czech Republic

The deposition of trace elements and their fate in a forest ecosystemhas been monitored at the experimental site, Lesni Potok catchment (LP), with granite bedrock. The catchment is located 30 km ESE from Prague. Annual bulk Pb-deposition flux F_Pb was 3.41 kg km^-2 a^-1 in 1994 and gradually decreased to 0.49 kg km^-2 a^-1 in 2001. The decrease is comparable with those observed in Germany and in the U.S.A. in the 1970s and 1980s. The total sales ban of leaded gasoline in the Czech Republic since January 2001 was accompanied by a pronounced decrease of F_Pb in a single year. The residual Pb-deposition flux is assigned to both the long-range transport of fine-grained vehicular lead aerosol (with a long residence time in the atmosphere) and to theemissions from power plant boilers burning lignite mined in the Czech northwest coal basin. The F_Pb of lead correlates stronglywith those of As, Cd, Cu, Zn and Be, the typical metals in coal fly ash, at two monitored sites. Topsoil horizons contain elevated concentrations of Pb (53–67 mg kg^-1), which are of anthropogenicorigin. Soils in the riparian areas contain increased concentrations of Pb when compared to soils on the hillslope areas. Significant amounts of Pb were found on a stream substrate and Fe-precipitate sampled from the stream. Low concentrations of Pb in bark and bole wood suggest that the uptake of Pb by vegetation is negligible. The very small surface water outputs (average of 0.002 kg km^-2 a^-1) compared to inputs (average of 1.890 kg km^-2 a^-1) from the LP catchment indicate an ongoing accumulation of Pb in a forested landscape.     

Application of a health promotion model to community-based sustainability planning

The future of human health and that of all other species depends on the viability and sustainability of a host of environments and ecosystems. Human behaviours have profound effects (both positive and negative) on such ecosystems. Despite the obviousness of these statements, there remains a lack of clarity around the mechanisms for altering specific behaviours related to sustainability and their impact on environments. This paper offers a conceptual framework for identifying relations between human behaviour and ecosystem health and sustainability. We also discuss strategies for changing target behaviours in the context of a programme or policy planning. Finally, we draw on research that applies this adaptation to a small island community near Vancouver, Canada.     

Tillage erosion and its effect on soil properties and crop yield in Denmark

Tillage erosion had been identified as a major process of soil redistribution on sloping arable land. The objectives of our study were to investigate the extent of tillage erosion and its effect on soil quality and productivity under Danish conditions. Soil samples were collected to a 0.45-m depth on a regular grid from a 1.9-ha site and analyzed for 137Cs inventories, as a measure of soil redistribution, soil texture, soil organic carbon (SOC) contents, and phosphorus (P) contents. Grain yield was determined at the same sampling points. Substantial soil redistribution had occurred during the past decades, mainly due to tillage. Average tillage erosion rates of 2.7 kg m(-2) yr(-1) occurred on the shoulderslopes, while deposition amounted to 1.2 kg m(-2) yr(-1) on foot- and toeslopes. The pattern of soil redistribution could not be explained by water erosion. Soil organic carbon and P contents in soil profiles increased from the shoulder- toward the toeslopes. Tillage translocation rates were strongly correlated with SOC contents, A-horizon depth, and P contents. Thus, tillage erosion had led to truncated soils on shoulderslopes and deep, colluvial soils on the foot- and toeslopes, substantially affecting within-field variability of soil properties. We concluded that tillage erosion has important implications for SOC dynamics on hummocky land and increases the risk for nutrient losses by overland flow and leaching. Despite the occurrence of deep soils across the study area, evidence suggested that crop productivity was affected by tillage-induced soil redistribution. However, tillage erosion effects on crop yield were confounded by topography-yield relationships.     

Characterisation of polycyclic aromatic hydrocarbons in flue gas and residues of a full scale fluidized bed combustor combusting non-hazardous industrial waste

This paper studies the fate of PAHs in full scale incinerators by analysing the concentration of the 16 EPA-PAHs in both the input waste and all the outputs of a full scale Fluidized Bed Combustor (FBC). Of the analysed waste inputs i.e. Waste Water Treatment (WWT) sludge, Refuse Derived Fuel (RDF) and Automotive Shredder Residue (ASR), RDF and ASR were the main PAH sources, with phenanthrene, fluoranthene and pyrene being the most important PAHs. In the flue gas sampled at the stack, naphthalene was the only predominant PAH, indicating that the PAHs in FBC’s combustion gas were newly formed and did not remain from the input waste. Of the other outputs, the boiler and fly ash contained no detectable levels of PAHs, whereas the flue gas cleaning residue contained only low concentrations of naphthalene, probably adsorbed from the flue gas. The PAH fingerprint of the bottom ash corresponded rather well to the PAH fingerprint of the RDF and ASR, indicating that the PAHs in this output, in contrast to the other outputs, were mainly remainders from the PAHs in the waste inputs. A PAH mass balance showed that the total PAH input/output ratio of the FBC ranged from about 100 to about 2600 depending on the waste input composition and the obtained combustion conditions. In all cases, the FBC was clearly a net PAH sink.     

Leaching behaviour of different scrap materials at recovery and recycling companies: Full-, pilot- and lab-scale investigation

Scrap material recovery and recycling companies are confronted with waste water that has a highly fluctuating flow rate and composition. Common pollutants, such as COD, nutrients and suspended solids, potentially toxic metals, polyaromatic hydrocarbons and poly chlorinated biphenyls can exceed the discharge limits. An analysis of the leaching behaviour of different scrap materials and scrap yard sweepings was performed at full-scale, pilot-scale and lab-scale in order to find possible preventive solutions for this waste water problem. The results of these leaching tests (with concentrations that frequently exceeded the Flemish discharge limits) showed the importance of regular sweeping campaigns at the company, leak proof or covered storage of specific scrap materials and oil/water separation on particular leachates. The particulate versus dissolved fraction was also studied for the pollutants. For example, up to 98% of the polyaromatic hydrocarbons, poly chlorinated biphenyls and some metals were in the particulate form. This confirms the (potential) applicability of sedimentation and filtration techniques for the treatment of the majority of the leachates, and as such the rainwater run-off as a whole.     

Livelihood vulnerability to climate change in the mountains of Northern Vietnam: comparing the Hmong and the Dzao ethnic minority populations

Environment, Development and Sustainability - Livelihoods of ethnic minority populations living in the mountains of Northern Vietnam are highly vulnerable to climate-induced natural hazards....     

Use of Performance Models in Restoration Projects

Environmental restoration projects can benefit from using performance models tied to monitoring plans and closure/exit strategies. Theoretical aspects are discussed and a case study is provided to illustrate how models can be developed and applied. Recognizing that site characterization cannot remove all uncertainty, most performance models cannot be narrowly developed (e.g., specific concentrations expected over time). Instead they must define threshold values at which performance data indicate the remedy is failing, or at least is not operating at the required level to achieve objectives within a reasonable timeframe. Ultimately, the performance model should be transformed to a closure model. The closure model is intended to document how closure was achieved and what measures remain in place to ensure protection of human health and the environment. In this context, the performance model is an intermediate step in the sequence starting from a conceptual site model and ending as the closure model. © 2014 Wiley Periodicals, Inc.     

The effect of protected areas on forest disturbance in the Carpathian Mountains 1985–2010

Protected areas are a cornerstone for forest protection, but they are not always effective during times of socioeconomic and institutional crises. The Carpathian Mountains in Eastern Europe are an ecologically outstanding region, with widespread seminatural and old‐growth forest. Since 1990, Carpathian countries (Czech Republic, Hungary, Poland, Romania, Slovakia, and Ukraine) have experienced economic hardship and institutional changes, including the breakdown of socialism, European Union accession, and a rapid expansion of protected areas. The question is how protected‐area effectiveness has varied during these times across the Carpathians given these changes. We analyzed a satellite‐based data set of forest disturbance (i.e., forest loss due to harvesting or natural disturbances) from 1985 to 2010 and used matching statistics and a fixed‐effects estimator to quantify the effect of protection on forest disturbance. Protected areas in the Czech Republic, Slovakia, and the Ukraine had significantly less deforestation inside protected areas than outside in some periods; the likelihood of disturbance was reduced by 1–5%. The effectiveness of protection increased over time in these countries, whereas the opposite was true in Romania. Older protected areas were most effective in Romania and Hungary, but newer protected areas were more effective in Czech Republic, and Poland. Strict protection (International Union for Conservation of Nature [IUCN] protection category Ia‐II) was not more effective than landscape‐level protection (IUCN III‐VI). We suggest that the strength of institutions, the differences in forest privatization, forest management, prior distribution of protected areas, and when countries joined the European Union may provide explanations for the strikingly heterogeneous effectiveness patterns among countries. Our results highlight how different the effects of protected areas can be at broad scales, indicating that the effectiveness of protected areas is transitory over time and space and suggesting that generalizations about the effectiveness of protected areas can be misleading.