Optimization of separation and logistics for recycling materials from wallpaper hanging sites

It is of huge importance for sustainability to find a pragmatic solution for recycling of a variety of wastes emitted in small mass such as the case of wallpaper replacements. A combination of two-step sorting scheme and transportation of the wastes in collaboration with the wholesalers was proposed to enhance the efficiency of recycling. The two-step sorting consists of the first sorting at the wallpaper hanging sites to separate and group wastes in a way to avoid heavy additional burden on the hanging job. Secondary sorting is conducted at a Sorting Center to re-group wastes to send to an intermediate processing company for recycling. To minimize the costs for transportation, the grouped wastes emitted at the hanging sites are brought back by the hangers and kept temporally and then moved to the wholesaler(s) on the way to receive new materials. When the wastes at the wholesaler(s) become sufficiently large for economic transportation, a truck is arranged to collect the wastes to transport them to the Sorting Center. A feasibility study to test the practicality of the method confirmed that it could be operable and the cost would be comparable or lower than that currently incurred for disposal of the wastes.     

Recovery of glass fibers from glass fiber reinforced plastics by pyrolysis

Fiber-reinforced plastic sheets containing unsaturated polyester cross-linked with styrene, CaCO₃ and glass fibers as fillers were pyrolyzed in a helium and steam atmosphere in order to recover glass fibers and valuable organic pyrolysis products. Glass fibers were separated from CaCO₃ and CaO by dissolving calcium salts in hydrochloric acid. Residual organic material was burnt afterwards. Best results were obtained at a pyrolysis temperature of 600 and 700 °C, resulting in a large liquid fraction high in styrene, leaving little residual organic material on the surface of the glass fibers. At a pyrolysis temperature of 500 °C, the degradation of the polymer matrix was incomplete, and at 900 °C, glass fibers were destroyed in the presence of CaO, leaving CaSiO₃ as a product.     

Formation and decomposition of tetrafluoroborate ions in the presence of aluminum

The formation and decomposition of tetrafluoroborate ions (BF₄⁻) in H₃BO₃-Al³⁺-F⁻ solutions were investigated via experiments and thermodynamic calculations. The concentration of the formed BF₄⁻ increased with decreasing pH, raising the total fluoride concentration and lowering the total aluminum ion concentration. Once formed, BF₄⁻ was stable under neutral and alkaline conditions. Fluoride in the form of BF₄⁻ was converted to fluoroaluminate ions by adding an aluminum compound under acidic conditions. A method for removing fluoride in the form of BF₄⁻ is proposed whereby fluoroaluminate ions formed by the reaction of BF₄⁻ with aluminum are decomposed with calcium ions. This process was applied to the treatment of wastewater from flue gas desulfurization plants, and resulted in a satisfying level of reduction in the range of the fluoride emission limit of 8 mg/l.     

Nonthermal Plasma Chemical Processing of Bromomethane

ABSTRACT

Nonthermal plasma chemical decomposition of bromomethane (CH₃Br) was investigated with a coaxial type packed-bed plasma reactor. It has been demonstrated that plasma chemical processing is an effective approach to decompose CH₃Br in a wide concentration range. It has been shown that CH₃Br decomposition reactivity depends on reactor operating factors such as background gas, O₂ concentration, and humidification. Higher decomposition efficiencies can be obtained in dry N₂. However, organic byproducts such as BrCN are concurrently produced under deaerated conditions. Water suppresses CH₃Br decomposition and also affects the yields of CO_x (CO and CO₂) and organic byproducts due to the involvement of some active species generated from water. The presence of O₂ retards CH₃Br decomposition by quenching high-energy electrons, while it suppresses organic byproducts and improves CO_x yield. The reacted carbons in CH₃Br are recovered as CO_x almost quantitatively in air. Higher CO₂ selectivities cannot be achieved by increasing O₂ concentration. NO_x formation, which is accompanied by CH₃Br decomposition, can be effectively suppressed by decreasing O₂ concentration down to 2%. Furthermore, reaction mechanisms are discussed by comparing the reactivities of CH₃Br and its congeners.     

Strategy for separation and treatment of disaster waste: a manual for earthquake and tsunami disaster waste management in Japan

Shortly after the March 11th earthquake and tsunami in eastern Japan, a Task Team for Disaster Waste Management and Reconstruction was established within the Japan Society of Material Cycles and Waste Management (JSMCWM). One of the major tasks undertaken by the team was to create a manual entitled, Strategies for Separation and Treatment of Disaster Waste. In this paper, this JSMCWM manual is introduced, followed by a review of existing guidelines for disaster waste management in various countries. We identify useful guidelines created by international agencies, national and local governments. The JSMCWM manual adds our new experiences, especially characterized by a huge scale of disaster and tsunami information, to the existing knowledge with an emphasis on separation and subsequent treatment options. It should be desirable to share our knowledge and experiences, not only domestically but also with other countries in the world, especially regions that could be affected by large earthquake and tsunami events.     

Sizing and Costing of Electrostatic Precipitators

This is the second of a two-part article that reviews electrostatic precipitation theory, presents size estimating methods, and gives costing procedures for a variety of electrostatic precipitator (ESP) types and sizes. Part I of the article, which appeared in the April 1988 issue of JAPCA, discussed theory and sizing; this part presents costing. Information is given for estimating total capital investment including separate costs for the bare ESP (five types) and auxiliaries. Factors are given for installation and for indirect costs. Direct and indirect annual costs are discussed. An example problem is given.     

Pyrolysis of tetrabromobisphenol-A containing paper laminated printed circuit boards

Tetrabromobisphenol-A (TBBA) is the most common brominated fire retardant. In this study, a TBBA containing paper laminated printed circuit board (PCB) prepared from novolac was pyrolysed by both TGA and in a quartz glass reactor between 40 and 1,000 degrees C. The products were online detected by MS. It was found that the PCB degraded in three steps. Step one (<270 degrees C) consisted of the evolution of water and CO(2) from the paper laminate. In the second step, between 270 and 370 degrees C, the fire retardant decomposed, releasing HBr and brominated aromatics. In the third step, at temperatures above 370 degrees C, the phenol resin decomposed and char was formed. Compared to pure TBBA, which mainly produces brominated phenols, the brominated products enclosed in the char released HBr during the last degradation step as well as during the second step. Most of the bromine left the resin in the form of HBr, with about 14% of the bromine being fixed in brominated aromatics and less than 2% remaining in the residue.     

Concentrations of polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans, and polychlorinated biphenyls in blood and breast milk collected from pregnant women in Sapporo City, Japan

We measured the concentrations of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), dioxin-like polychlorinated biphenyls (PCBs), and non-dioxin-like PCBs in paired samples of blood and breast milk collected from 67 secundiparas in Sapporo City, Japan, and combined this data with those of the 30 secundiparas previously measured. The arithmetic mean total toxic equivalents (TEQ-WHO) concentrations of PCDDs, PCDFs, non-ortho PCBs, and mono-ortho PCBs in blood and breast milk of the 97 secundiparous subjects were 3.0-23 (mean: 13, median: 14) and 2.7-20 (mean: 8.6, median: 8.5) pg TEQ g⁻¹ lipid, respectively. The sums of the concentrations of 56 non-dioxin-like PCB congeners that were measured in the subjects’ blood and breast milk were 16-326 (mean: 107, median: 100) and 12-252 (mean: 73, median: 67) ng g⁻¹ lipid, respectively. The partitioning ratios of individual congeners of PCDDs, PCDFs, dioxin-like PCBs, and non-dioxin-like PCBs from blood to breast milk in secundiparas were almost the same as those of primiparas that have been recently reported, suggesting that the partitioning ratios of these compounds from maternal blood to breast milk in women is little affected by delivery. Furthermore, the partition of PCB congeners with chlorine at the 2-, 3-, 4′-, and 5-positions or the 2-, 4-, 4′-, and 5-positions of the biphenyl ring from the blood to the breast milk tended to occur at a higher level than that of other congeners. In particular, the levels of tetraCB-74 and hexaCB-146 in the breast milk for both primiparous and secundiparous mothers were slightly higher than those in the blood.     

Removal of tetrafluoroborate ion from aqueous solution using magnesium-aluminum oxide produced by the thermal decomposition of a hydrotalcite-like compound

Magnesium-aluminum oxide (Mg-Al oxide) prepared by the thermal decomposition of a hydrotalcite-like compound was found to have potential for treating NaBF(4) wastewater. The Mg-Al oxide removed the BF(4)(-) and F(-) and H(3)BO(3) from the NaBF(4) solution. With increasing Mg-Al oxide quantity and time, the BF(4)(-) concentration decreased and the degree of BF(4)(-), F(-), and boron removal increased. The decrease in the BF(4)(-) concentration resulted from uptake by the Mg-Al oxide and not hydrolysis. The Mg-Al oxide took up F(-) from the solution preferentially. The Mg-Al oxide also converted the H(3)BO(3) in the aqueous solution into H(2)BO(3)(-), which it took up.