Fish status survey of Nordic lakes: effects of acidification,eutrophication and stocking activity on present fish species composition

The status of fish populations in 3821 lakes in Norway, Sweden and Finland was assessed in 1995-1997. The survey lakes were chosen by stratified random sampling from all (126 482) Fennoscandian lakes > or = 0.04 km2. The water chemistry of the lakes was analyzed and information on fish status was obtained by a postal inquiry. Fish population losses were most frequent in the most highly acidified region of southern Norway and least common in eastern Fennoscandia. According to the inquiry results, the number of lost stocks of brown trout (Salmo trutta), roach (Rutilus rutilus), Arctic char (Salvelinus alpinus) and perch (Perca fluviatilis) was estimated to exceed 10000. The number of stocks of these species potentially affected by the low alkalinity of lake water was estimated to exceed 11000. About 3300 lakes showed high total phosphorus (> 25 microg L(-1)) and cyprinid dominance in eastern Fennoscandia, notably southwestern Finland. This survey did not reveal any extinction of fish species due to eutrophication. One-third of the lakes had been artificially stocked with at least one new species, most often brown trout, whitefish (Coregonus lavaretus s.l.), Arctic char, rainbow trout (Oncorhynchus mykiss), pike-perch (Stizostedion lucioperca), grayling (Thymallus thymallus), pike (Esox lucius), bream (Abramis brama), tench (Tinca tinca) and European minnow (Phoxinus phoxinus). The number of artificially manipulated stocks of these species in Fennoscandian lakes was estimated to exceed 52000. Hence, the number of fish species occurring in Nordic lakes has recently been changed more by stockings than by losses of fish species through environmental changes such as acidification.     

Elevated temperature elicits greater effects than decreased pH on the development, feeding and metabolism of northern shrimp (Pandalus borealis) larvae

Climate models predict that the average temperature in the North Sea could increase 3–5 °C and surface-waters pH could decrease 0.3–0.5 pH units by the end of this century. Consequently, we investigated the combined effect of decreased pH (control pH 8.1; decreased pH 7.6) and temperature (control 6.7 °C; elevated 9.5 °C) on the hatching timing and success, and the zoeal development, survival, feeding, respiration and growth (up to stage IV zoea) of the northern shrimp, Pandalus borealis. At elevated temperature, embryos hatched 3 days earlier, but experienced 2–4 % reduced survival. Larvae developed 9 days faster until stage IV zoea under elevated temperature and exhibited an increase in metabolic rates (ca 20 %) and an increase in feeding rates (ca 15–20 %). Decreased pH increased the development time, but only at the low temperature. We conclude that warming will likely exert a greater effect on shrimp larval development than ocean acidification manifesting itself as accelerated developmental rates with greater maintenance costs and decreased recruitment in terms of number and size.     

Using Archive Data to Investigate Trends in the Sources and Composition of Urban PM10 Particulate Matter: Application to Edinburgh (U.K.) Between 1992 and 1997

By extending the method of Stedman (1998), daily dataof atmospheric concentrations of gravimetricPM₁₀, black smoke (BS) and sulphate aerosol (SA)from national networks were analysed to determine thetrends in time of the contribution of different sources of particulate matter to total PM₁₀ measured in central Edinburgh. Since BS is an indicator of combustion-related primary sources of particulate matter, the quantity obtained by subtraction of daily BS from daily PM₁₀ is indicative of the contribution to total PM₁₀ from other primary sources and from secondary aerosol. This PM₁₀-BS statistic was regressed on SA, since SA is an indicator of variation in secondary aerosol source. For Edinburgh, SA is a considerably better indicator of PM₁₀-BS during summer than winter (reflecting the much greater photochemical generation of secondary aerosol in summer) and there is evidence that the contribution of other secondary aerosol (presumably nitrate aerosol) has increased relative to SA between 1992 and 1997. The concentration of non-combustion primary particulate material (marine aerosol, suspended dust) to PM₁₀ in Edinburgh has not changed over this period but is about twice that calculated as the U.K. national average. The increasing input to PM₁₀ from secondary aerosol sources at regional rather than urban scale has important implications for ensuring local air quality compliance. The method should have general applicability to other locations.     

Compact semi-automatic incident sampler for personal monitoring of volatile organic compounds in occupational air

Suddenly occurring and time limited chemical exposures caused by unintended incidents might pose a threat to many workers at various work sites. Monitoring of exposure during such occasional incidents is challenging. In this study a compact, low-weight and personal semi-automatic pumped unit for sampling of organic vapor phase compounds from occupational air during sporadic and suddenly occurring incidents has been developed, providing simple activation by the worker potentially subjected to the sudden occurring exposures when a trained occupational hygienist is not available. The sampler encompasses a tube (glass or stainless steel) containing an adsorbent material in combination with a small membrane pump, where the adsorbent is capped at both ends by gas tight solenoid valves. The sampler is operated by a conventional 9 V battery which tolerates long storage time (at least one year), and is activated by pulling a pin followed by automatic operation and subsequent closing of valves, prior to shipping to a laboratory. The adjustable sampling air flow rate and the sampling time are pre-programmed with a standard setting of 200 mL min(-1) and 30 min, respectively. The average airflow in the time interval 25-30 min compared to average airflow in the interval 2-7 min was 92-95% (n = 6), while the flow rate between-assay precisions (RSD) for six different samplers on three days each were in the range 0.5-3.7%. Incident sampler recoveries of VOCs from a generated VOC atmosphere relative to a validated standard method were between 95 and 102% (+/-4-5%). The valves that seal the sampler adsorbent during storage have been shown to prevent an external VOC atmosphere (500 mg m(-3)) to enter the adsorbent tube, in addition to that the sampler adsorbent is storable for at least one month due to absence of ingress of contaminants from internal parts. The sampler was also suitable for trapping of semi-volatile organophosphates.     

Review of the DESC project

Dust Explosion Simulation Code (DESC) was a project supported by the European Commission under the Fifth Framework Programme. The main purpose of the project was to develop a simulation tool based on computational fluid dynamics (CFD) that could predict the potential consequences of industrial dust explosions in complex geometries. Partners in the DESC consortium performed experimental work on a wide range of topics related to dust explosions, including dust lifting by flow or shock waves, flame propagation in vertical pipes, dispersion-induced turbulence and flame propagation in closed vessels, dust explosions in closed and vented interconnected vessel systems, and measurements in real process plants. The new CFD code DESC is based on the existing CFD code FLame ACceleration Simulator (FLACS) for gas explosions. The modelling approach adopted in the first version entails the extraction of combustion parameters from pressure–time histories measured in standardized 20-l explosion vessels. The present paper summarizes the main experimental results obtained during the DESC project, with a view to their relevance regarding dust explosion modelling, and describes the modelling of flow and combustion in the first version of the DESC code. Capabilities and limitations of the code are discussed, both in light of its ability to reproduce experimental results, and as a practical tool in the field of dust explosion safety.     

A constant pressure dust explosion experiment

A new apparatus has been designed for investigating flame propagation in turbulent dust clouds at near constant pressure conditions. The experimental approach is inspired by the classical soap bubble method for measuring burning velocities in gaseous mixtures. Combustible dust is dispersed with pressurised air to form an explosive mixture inside a transparent latex balloon. After a certain delay time, the turbulent dust cloud is ignited by a 40 J chemical igniter. A digital high-speed video camera records the propagating flame and the expansion of the balloon. Experiments were performed with two types of dust, Lycopódium spores and maize starch, as well as with propane–air mixtures under initially quiescent or turbulent conditions. Although the results are primarily qualitative in nature, they nevertheless demonstrate fundamental differences between premixed combustion of gaseous mixtures, and ‘premixed combustion with non-premixed substructures' in mechanical suspensions of solid particles dispersed in air. The discussion highlights some fundamental challenges for future dust explosion research.