Detection and quantitative analysis of organochlorine compounds (PCBs and DDTs) in deep sea fish liver from Mediterranean Sea

Background, aim and scope  

Polychlorinated biphenyls (PCB) and dichlorodiphenyltrichloroethane (DDT) concentrations were determined in the liver of two deep sea fish species, Mediterranean slimehead and blackfin sorcerer, from the Adriatic Sea (southeastern Mediterranean Sea).     

Past and future trends in concentrations of sulphur and nitrogen compounds in the Arctic

Recent trends in nitrogen and sulphur compounds in air and precipitation from a range of Arctic monitoring stations are presented, with seasonal data from the late 70s to 2004 or 2005. Earlier findings of declining sulphur concentrations are confirmed for most stations, while the pattern is less clear for reduced and oxidized nitrogen. In fact there are positive trends for nitrogen compounds in air at several stations. Acidity is generally reduced at many stations while the precipitation amount is either increasing or stable. Variability of sulphate concentrations in air for the period 1991–2000 is reasonably well reproduced at most stations using an Eulerian, hemispherical model. Results for nitrogen compounds are weaker. Scenario studies show that even if large sulphur emission reductions take place in important source regions in South-East Asia in the coming decades, only small changes in Arctic deposition can be expected. This is because South-East Asian emissions have small influence north of the Arctic circle.     

Assessment of susceptibility of olive cultivars to the Bactrocera oleae (Gmelin, 1790) and Camarosporium dalmaticum (Thüm.) Zachos & Tzav.-Klon. attacks in Calabria (Southern Italy)

Within the framework of research concerning the application of techniques alternative to chemical pesticides for control of parasites, the C.R.A. Experimental Institute for Olive Growing for many years has been performing a large investigation in order to detect sources of genetic resistance in olive germplasm. In the present study we observed the behavior related to the olive fly (Bactrocera oleae) infestation and Camarosporium dalmaticum infection of ten olive cultivars farmed under the same agronomic and climatic conditions in Calabria, Southern Italy. The sampling and the data collecting were carried out in three different ripening times.The drupe amount of oleuropein and cyanidine was detected by laboratory analyses in order to verify a possible correlation between these molecules and the level of infestation/infection of the above-mentioned parasites. The obtained data were submitted to analysis of variance. In relation to the fungal infection the results displayed that cvs Tonda nera dolce showed the lowest susceptibility, while the cv Giarraffa turned out to be the most susceptible. The less susceptible cultivars to the phytophagous were Tonda nera dolce and Bhardi Tirana. Since the less susceptible cultivar to olive fly attacks are the same observed in relation to the susceptibility to olive fruit rot, it is suggested a relation between the olive fly infestation and the fungal infection. It suggests the utility to achieve these results both to transfer directly to the farmers' world and to emphasize ecosystem health and biodiversity conservation.     

Environmental applications of poly(amic acid)-based nanomaterials

Nanoscale materials offer new possibilities for the development of novel remediation and environmental monitoring technologies. Different nanoscale materials have been exploited for preventing environmental degradation and pollutant transformation. However, the rapid self-aggregation of nanoparticles or their association with suspended solids or sediments where they could bioaccumulate supports the need for polymeric coatings to improve mobility, allows faster site cleanups and reduces remediation cost. The ideal material must be able to coordinate different nanomaterials functionalities and exhibit the potential for reusability. We hereby describe two novel environmental applications of nanostructured poly (amic acid)-based (nPAA) materials. In the first application, nPAA was used as both reductant and stabilizer during the in situ chemical reduction of chromium(vi) to chromium(iii). Results showed that Cr(vi) species were rapidly reduced within the concentration range of 10(-1) to 10(2) mM with efficiency of 99.9% at 40 °C in water samples and 90% at 40 °C in soil samples respectively. Furthermore, the presence of PdNPs on the PAA-Au electrode was found to significantly enhance the rate of reduction. In the second application, nPAA membranes were tested as filters to capture, isolate and detect nanosilver. Preliminary results demonstrate the capability of the nPAA membranes to quantitatively capture nanoparticles from suspension and quantify their abundance on the membranes. Silver nanoparticles detection at concentrations near the toxic threshold of silver was also demonstrated.     

A novel methodology for determining low-cost fine particulate matter street sweeping routes

This paper addresses the problem of low-cost PM10 (particulate matter with aerodynamic diameter < 10 microm) street sweeping route. In order to do so, only a subset of the streets of the urban area to be swept is selected for sweeping, based on their PM10 emission factor values. Subsequently, a low-cost route that visits each street in the set is computed. Unlike related problems of waste collection where streets must be visited once (Chinese or Rural Postman Problem, respectively), in this case, the sweeping vehicle route must visit each selected street exactly as many times as its number of street sides, since the vehicle can sweep only one street side at a time. Additionally, the route must comply with traffic flow and turn constraints. A novel transformation of the original arc routing problem into a node routing problem is proposed in this paper. This is accomplished by building a graph that represents the area to sweep in such a way that the problem can be solved by applying any known solution to the Traveling Salesman Problem (TSP). As a way of illustration, the proposed method was applied to the northeast area of the Municipality of Santiago (Chile). Results show that the proposed methodology achieved up to 37% savings in kilometers traveled by the sweeping vehicle when compared to the solution obtained by solving the TSP problem with Geographic Information Systems (GIS)--aware tools.     

An air quality balance index estimating the total amount of air pollutants at ground level

A new index named Air Quality Balance Index (AQBI), which is able to characterise the amount of pollution level in a selected area, is proposed. This index is a function of the ratios between pollutant concentration values and their standards; it aims at identifying all situations in which there is a possible environmental risk even when several pollutants are below their limit values but air quality is reduced. AQBI is evaluated by using a high-resolution three-dimensional dispersion model: the air concentration for each substance is computed starting from detailed emissions sources: point, line and area emissions hourly modulated. This model is driven with accurate meteorological data from ground stations and remote sensing systems providing vertical profiles of temperature and wind; these data are integrated with wind and temperature profiles at higher altitudes obtained by a Local Area Model. The outputs of the dispersion model are compared with pollutant concentrations provided by measuring stations, in order to recalibrate emission data. A three-dimensional high resolution grid of AQBI data is evaluated for an industrial area close to Alessandria (Northern Italy), assessing air quality and environmental conditions. Performance of AQBI is compared with the Air Quality Index (AQI) developed by the U.S. Environmental Protection Agency. AQBI, computed taking into account all pollutants, is able to point out situations not evidenced by AQI, based on a preset limited number of substances; therefore, AQBI is a good tool for evaluating the air quality either in urban and in industrial areas. The AQBI values at ground level, in selected points, are in agreement with in situ observations.     

Arsenic partitioning among particle-size fractions of mine wastes and stream sediments from cinnabar mining districts

Tailings from abandoned mercury mines represent an important pollution source by metals and metalloids. Mercury mining in Asturias (north-western Spain) has been carried out since Roman times until the 1970s. Specific and non-specific arsenic minerals are present in the paragenesis of the Hg ore deposit. As a result of intensive mining operations, waste materials contain high concentrations of As, which can be geochemically dispersed throughout surrounding areas. Arsenic accumulation, mobility and availability in soils and sediments are strongly affected by the association of As with solid phases and granular size composition. The objective of this study was to examine phase associations of As in the fine grain size subsamples of mine wastes (La Soterraña mine site) and stream sediments heavily affected by acid mine drainage (Los Rueldos mine site). An arsenic-selective sequential procedure, which categorizes As content into seven phase associations, was applied. In spite of a higher As accumulation in the finest particle-size subsamples, As fractionation did not seem to depend on grain size since similar distribution profiles were obtained for the studied granulometric fractions. The presence of As was relatively low in the most mobile forms in both sites. As was predominantly linked to short-range ordered Fe oxyhydroxides, coprecipitated with Fe and partially with Al oxyhydroxides and associated with structural material in mine waste samples. As incorporated into short-range ordered Fe oxyhydroxides was the predominant fraction at sediment samples, representing more than 80 % of total As.     

The interdependence of work and family roles

The circumstances of the lack of attention to the interdependence of family functions and external employment in the research to date are considered. Major problems and barriers to progress are noted. One problem is the conceptual-theoretical barrier of viewing work as masculine and family responsibility as feminine. A second problem is a differential focus in the research to date in which either the family is studied with inadequate attention given to work, or the work setting is studied with insufficient consideration of family responsibilities. Research strategies are reviewed and discussed, including the need to identify combinations of types of occupations and family situations. Five work-family groups are identified. One of the five groups, single parent is used to illustrate policies pertaining to the interdependence of work and family roles. The relevance of research on role interdependence for both governmental policy and organizational policy is considered in a discussion of the effects of policy on effective integration of work and family roles.     

Integrated environmental index for application in land-use zoning

This paper describes the development of an integrated environmental index that may serve as a representation of the general environmental quality at a certain location. This index is meant to be used by local administrators to strike a balance between the development of industrial activities and the protection of sensitive land-uses (housing). The approach used to arrive at this index, based on health considerations, is described, detailing the different steps in the construction of the index: identification, assessment, summation, valuation and aggregation. The index combines environmental quality information concerning noise, odor, air pollution, and risk of industrial calamities. The resulting integrated environmental index is illustrated using data of a pilot project.