Urban planning at the turn of the 21st century

Contemporary urban planning is characterised by the following: (a) a large amount of specific research gives a large quantity of facts, but like stones of the mosaic do hot make an entire picture; (b) in the basis of these researches no one finds entire creative conceptions; (c) the theories lose touch with practical design matter; (d) in contradiction to the classical architectural epoch, urban planning loses touch with the construction of buildings; (e) the practice of urban planning and the construction of buildings lose touch with historical traditions. The corollary of these academic and unnatural specialisations is a break not only from “the tie of times” but also from the ties inside the profession. This situation has an effect on the practice of urban planning and architecture; society returns to destructive criticism. It is impossible to get away from this fact. The author makes an attempt to change this situation for the better — at least in some measures. On the basis of many years study of the results of research this paper presents a concept of contemporary urban planning. This concept is not in the form of hard recommendations, but expedient methods for the solution of problems. It is proved by the author's projects.     

Life Cycle Assessment for biodiesel production under Greek climate conditions

The aim of this paper is to understand and to model the environmental performance of biodiesel produced by various Greek raw materials under current conditions. Three energy crops (rapeseed, sunflower and soybean) have been studied, with regard to their levels of biodiesel productivity. Throughout the entire process, current Greek climatic conditions and cultivation parameters have been taken into account. At the stage of assessment, we conclude that the environmental impacts per crop area indicate that soybean has the lowest environmental impacts. However, by assessing the results per quantity of produced biodiesel, the crop with the minimum environmental impacts is sunflower. This paper shows that environmental benefits from biodiesel have better results, compared to conventional diesel, thus leading to the conclusion that it is feasible to succeed improved environmental performance.     

A full-scale sequencing batch reactor system for swine wastewater treatment

A full-scale sequencing batch reactor (SBR) system was evaluated for its ability to remove carbon and nitrogen from swine wastewater. The SBR was operated on four, six-hour cycles each day, with each cycle consisting of 4.5 hours of "React," 0.75 hours of "Settling", 0.75 hours for "Draw" and "Fill." Within each cycle, an amount of wastewater equivalent to about 5% of the reactor volume (5,500 litres) was removed and added. The SBR system was able to remove 82% of biochemical oxygen demand (BOD) and more than 75% of nitrogen. Even though the SBR effluent, with an average effluent BOD5 of about 588 mg L(-1), did not meet the discharge criteria, it enabled a reduction of the land base required for land application of swine wastewater by about 75%. Results indicated that the SBR system was a viable method for the treatment of swine wastewater.     

货物集装箱扫描技术的发展

恐怖分子利用货物集装箱走私核武器或用于放射性频散装置(RDD)的放射性材料,美国和其他国家目前都在面临这一严重威胁.     

What factors determine trace metal contamination in Lake Tonga (Algeria)?

A study of trace metal (TM) contamination was conducted at Lake Tonga (Algeria), a site surrounded by several indirect contamination point sources such as an abandoned mine and steelworks. Studying two sampling sites over four seasons, we were able to depict the spatial and temporal variability of TM contamination in the lake. Among the seven TM examined (Pb, Cd, Fe, Zn, Ni, Cu, and Cr), only Fe, Pb, and Cd showed concentrations significantly higher than the site’s geological background. The contamination index (sediment concentration/background concentration) calculated for these three TM (Cd = 1.9?±?1.6, Fe = 6.8?±?1.8, and Pb = 3.3?±?2.6) clearly indicated anthropogenic contamination. Sediment TM contamination differed both between sampling sites and seasons despite environmental variables (e.g., oxygen and pH) being similar, thus suggesting different TM contamination sources. Fe contamination was high at the two sampling sites and over all studied seasons, possibly indicating general lake-scale Fe contamination, probably related to atmospheric deposition of steelworks emissions both on the lake and within the watershed. Lake tributaries were further suspected of channeling Fe contamination from the watershed into the lake. On the other hand, the sampling site close to the outlet was especially rich in Cd and Pb typically reflecting contamination by mine wastes. The indirect connection between the abandoned mine and the lake indicates that runoff of mine leachates through groundwater was likely a candidate in explaining the specificity of the TM contamination in this part of the lake. This study provides insights for management of TM contamination by addressing both spatial and temporal variability within the lake as well as differences in contamination sources.