Stability of a Coal Waste Artificial Reef

The feasibility of using U.K. coal-fired power station waste materials for artificial reef production is being examined. in June, 1989, an experimental artificial reef was constructed in Poole Bay, off the central south coast of the U.K., using three different mixtures of pulverised fuel ash (PFA), flue gas desulphurisation (FGD) gypsum and slurry, stabilized with cement and formed into blocks. Fifty tonnes of 40 × 20 × 20 cm blocks were formed into eight conical reef units replicating three different PFA/gypsum mixtures and one concrete control. the reef structure is 10m below chart datum on a flat sandy sea-bed.

Combustion of coal concentrates the heavy metal content in the resultant ash. the purpose of stabilization of the ash as blocks is twofold: to immobilize heavy metals (or other components) and to provide hard substratum for the attachment of organisms. to examine the effectiveness of this stabilization and hence the environmental compatibility of the block materials, heavy metal (Cd, Cr, Cu, Pb, Mn, Ni, Zn) content of the blocks has been monitored routinely over two years, to determine leaching rates. Sectional profiles indicate partial replacement of calcium content by magnesium. Associated with this there has also been some redistribution of heavy metals. Only in the case of cadmium has there been a detectable loss from the surface of blocks. Chromium and manganese concentrations appear to have increased. the metal content of the reef epibiota (including ascidians, Ascidia mentula; hydroids, Halecium spp.; bryozoans, Bugula spp. and red algae) growing on the ash blocks has been compared to that of epibiota attached to the concrete controls and surrounding sea-bed. to date no evidence of excess bioaccumulation of metals has been detected.

The physical integrity of the ash reef blocks has been maintained. There is evidence that the blocks are increasing in compressive strength.

An indication of the fishery enhancement potential of the experimental structure is given by the presence of eight commercially fished species (crustaceans and molluscs) including lobsters (Homarus gammarus).     

The gill symbiont of the hydrothermal vent mussel Bathymodiolus thermophilus is a psychrophilic,chemoautotrophic, sulfur bacterium

Certain hydrothermal vent invertebrates, e.g. Riftia pachyptila and Calyptogena magnifica, are clearly established as harboring dense populations of chemoautotrophic sulfur bacteria in specialized tissues. By contrast, the physiological characteristics of the abundant intracellular gill symbiont of the vent mussel Bathymodiolus thermophilus have been questioned. The low activities of enzymes diagnostic for CO₂ fixation (Calvin cycle) and for sulfur-driven energy generation, as measured by other investigators, have been attributed to bacterial contamination of the gill surface. Based on research at the Galápagos Rift hydrothermal vents in 1988 and subsequent laboratory experiments, the current study confirms that the B. thermophilus symbiont is a psychrophile for which thiosulfate and sulfide stimulate CO₂ fixation. It strongly indicates that the symbiont is a chemoautotroph by establishing the following: (1) Sulfide and thiosulfate can stimulate CO₂ fixation by partially purified symbionts by up to 43-fold and 120-fold, respectively; (2) the ribulose-1,5-bisphosphate carboxylase/oxygenase activity of the symbiont is sufficient to account for its sulfide- or thiosulfate-stimulated CO₂ incorporation; (3) the symbiont's molar growth yield on thiosulfate, as judged by CO₂ incorporation, is indistinguishable from that of free-living chemoautotrophs. Due to the high protein-degrading activity of B. thermophilus gill lysate, it is also suggested that host lysis of symbionts plays a more important role in the nutrition of the vent mussel than in R. pachyptila or C. magnifica, for which no comparable protein-degrading activity was found.     

Sublittoral epifaunal communities at Signy Island,Antarctica. I. The ice-foot zone

Photographs were taken every 0.5 m along three transects of 5.5 m length on shallow rock faces at Signy Island, Antarctica, during the austral summer of 1991/1992. The percentage cover of substratum ranged from 0 to 100% and the colonising communities included representatives of ten phyla. The zone from mean low-water neap level to 1.5 m depth was mostly devoid of organisms as a result of the seasonal formation of the encrusting ice foot. Coralline and macroalgae dominated from 2 to 3 m, and animal groups from 3.5 to 5.5 m. Bryozoans, and to a lesser extent sponges, were the most abundant animal phyla. Within the bryozoans a succession of colonisation of different species was observed, the most abundant two of which occupied >80% of substratum in places. Substratum type seemed to be the main factor influencing community development in the shallow sublittoral at Signy Island, although ice impact prevents community development in the top 1.5 m and limits it over the rest of the transect down to 5.5 m. Depth and profile of substratum also influenced communities within this depth range (particularly taxonomic composition).     

ARSENIC CONSUMPTION AND HEALTH RISK PERCEPTIONS IN A RURAL WESTERN U.S. AREA1

ABSTRACT: Churchill County, Nevada, has approximately 23,000 residents, among whom an estimated 13,500 relied on private wells for water supply in 2002. This study examined exposure to arsenic in water supplies among residents with private domestic wells and factors related to householder choice to consume tap water. It compared opinions and concerns about water quality with consumption habits and observed concentrations from tap water samples. The results from 351 households indicated that a majority (75 percent) of respondents consumed tap water and that a minority (38 percent) applied treatment. Approximately 66 percent of those who consumed tap water were exposed to concentrations of arsenic that exceeded 10 ppb. Water consumption was related to application of treatment. Among 98 respondents who were not at all concerned about the health effects of aqueous arsenic, 59 (60 percent) reported consuming tap water with concentrations of arsenic exceeding 10 ppb. Conversely, among 86 respondents who were highly concerned about arsenic, 33 (37 percent) consumed tap water with concentrations of arsenic exceeding 10 ppb. Results from a national sampling effort showed that 620 of 5,304 private wells sampled (11.7 percent) had arsenic concentrations above 10 ppb. The paradox of awareness of arsenic in water supplies coupled with consumption of aqueous arsenic in concentrations greater than 10 ppb may be common in other parts of the nation. Enhanced educational efforts, especially related to tap water sampling and explanations of efficacy of available treatment, may be useful means of reducing exposure through private water supplies.     

Seasonal fluctuations in sand temperature: effects on the incubation period and mortality of loggerhead sea turtle (<Emphasis Type="Italic">Caretta</Emphasis><Emphasis Type="Italic">caretta</Emphasis>) pre-emergent hatchlings in Minabe,Japan

Incubation period, hatching success, and emergence percentage in loggerhead (Caretta caretta) nests were quantified during the 1993 and 1995 nesting seasons and following incubation seasons in Minabe, Wakayama, Japan. Sand and nest temperatures were also monitored. Over the seasons, daily mean sand temperature at nest depth fluctuated between 18.0°C and 33.3°C, with a steep increase in the second week of July and a peak in late August. Temperatures inside the nest chambers were a few degrees above those of the surrounding sand at the end of incubation. The incubation period ranged from 46 to 82 days. A significant negative correlation was found between mean sand temperature and incubation period. The relationship conformed to the day-degree concept. There was no significant seasonal trend in hatching success, but many pre-emergent hatchlings were found dead in most of the clutches during the warmest part of the season. Emergence percentage was correlated with mean sand temperature calculated for 4 days before emergence, suggesting that mortality may be due to heat. This heat-related mortality is considered to be a common phenomenon at our study site, because the peak in emergences coincides with the peak in high temperatures. These temperature effects on hatchling mortality must be taken into account in estimates of hatchling sex ratios. Because sand temperatures already exceed the optimal thermal range for incubation, this population is vulnerable to even small temperature increases resulting from global warming.     

Effects of bed materials on the performance of an anaerobic sequencing batch biofilm reactor treating domestic sewage

The objective of this study was to determine the best performance of an anaerobic sequencing batch biofilm reactor (AnSBBR) based on the use of four different bed materials as support for biomass immobilization. The bed materials utilized were polyurethane foam (PU), vegetal carbon (VC), synthetic pumice (SP), and recycled low-density polyethylene (PE). The AnSBBR, with a total volume of 7.2L, was operated in 8-h batch cycles over 10 months, and fed with domestic sewage with an average influent chemical oxygen demand (COD) of 358+/-110mg/L. The average effluent COD values were 121+/-31, 208+/-54, 233+/-52, and 227+/-51mg/L, for PU, VC, SP, and PE, respectively. A modified first-order kinetic model was adjusted to temporal profiles of COD during a batch cycle, and the apparent kinetic constants were 0.52+/-0.05, 0.37+/-0.05, 0.80+/-0.04, and 0.30+/-0.02h(-1) for PU, VC, SP, and PE, respectively. Specific substrate utilization rates of 1.08, 0.11, and 0.86mg COD/mgVS day were obtained for PU, VC, and PE, respectively. Although SP yielded the highest kinetic coefficient, PU was considered the best support, since SP presented loss of chemical constituents during the reactor's operational phase. In addition, findings on the microbial community were associated with the reactor's performance data. Although PE did not show a satisfactory performance, an interesting microbial diversity was found on its surface. Based on the morphology and denaturing gradient gel electrophoresis (DGGE) results, PE showed the best capacity for promoting the attachment of methanogenic organisms, and is therefore a material that merits further analysis. PU was considered the most suitable material showing the best performance in terms of efficiency of solids and COD removal.     

Molecular taxonomy of vestimentiferans of the western Pacific and their phylogenetic relationship to species of the eastern Pacific

The nucleotide sequence of part (624 bp) of a mitochondrial gene for cytochrome oxidase I was determined for 46 escarpiid vestimentiferans collected from seven sites in the western Pacific and 49 individual specimens of Arcovestia ivanovi from two sites in the Manus Basin. Phylogenetic analysis, based on the newly obtained and previously reported sequences, indicated that escarpiids in the western Pacific can be divided into two tentative species, as we proposed in a previous report. While members of the first tentative species have been collected exclusively from a seep area at a depth of 300 m off the coast of central Japan, the members of the second species inhabit some sites at depths greater than 1,100 m, namely, seep areas in Japanese and Papua-New Guinean waters as well as hydrothermal vent fields in the Okinawa Trough and the Manus Basin. We detected no genetic structure among populations of the second tentative species. The first tentative species was more closely related to a species in the eastern Pacific, Escarpia spicata, and to a species in the Gulf of Mexico, Escarpia laminata, than to the second tentative species in the western Pacific. Sequences obtained from all arcovestiids were identical with the exception of those from three individuals, each of which included a single synonymous nucleotide substitution relative to the dominant haplotype, and no genetic differences were detected between specimens from the two sites in the Manus Basin.