氧基氯化铁非均相活化过一硫酸盐降解金橙Ⅱ

采用部分热分解法制备了氧基氯化铁（FeOCl）,用于活化过一硫酸盐（PMS）降解难降解偶氮染料金橙Ⅱ（AO7）.利用X射线光电子能谱分析（XPS）、扫描电镜（SEM）和X射线衍射光谱（XRD）对其进行了表征;通过实验评估FeOCl/PMS体系对AO7的降解效果并分析了影响AO7去除率的各种因素.结果表明：FeOCl活化PMS降解AO7效果良好,矿化率达44%.在中性条件下,当FeOCl投加量50mg/L、PMS浓度1.0mmol/L、AO7浓度0.05mmol/L时,AO7可在30min内完全降解.随PMS投加量、FeOCl投加量、Cl^-浓度和反应初始pH值的增大,AO7的脱色效果提高.FeOCl还具有良好的重复利用性.此外,通过自由基淬灭实验、EPR测试和XPS分析了反应的主要活性物种和反应机理：由PMS活化产生的SO₄^-·和·OH对污染物进行降解,其中主要活性物种为SO₄^-·.     

Cr(Ⅵ)踪迹指标现场测定用于铬污染地下水源解析

根据研究区地下水样品测试结果,该文选定与Cr(Ⅵ)极强相关,且物理化学性质较稳定的钠离子作为研究地下水中Cr(Ⅵ)迁移规律的踪迹指标,并采用钠离子复合电极建立了踪迹指标现场检测方法。实验结果表明,钠离子浓度在5～500 mg/L线性范围内的电极响应斜率为-61.09 mV/pNa(103%),方法检出限为0.69 mg/L,加标回收率为92.8%～103.4%,现场测试结果与实验室测试结果一致。该研究根据踪迹指标钠离子与污染物现场检测数据,构建了钠离子与Cr(Ⅵ)浓度比值的对数函数,并有效识别出主污染源、次级污染源、污染物迁移主路径、潜在污染区、潜在影响区及背景区,为铬渣类污染场地土壤和地下水环境风险评价及污染修复提供了技术支撑和参考依据。     

长江经济带水质目标管理平台总体设计

为强化长江经济带资源整合与共享,集成统一规范的大数据平台,基于“十一五”“十二五”国家水体污染控制与治理科技重大专项数据和模型库资源,以面向服务的架构(SOA)和模块化设计为支撑,遵循“五横两纵四统一”的平台架构设计思路,应用大数据挖掘、云计算等现代信息技术,构建长江经济带水质目标管理平台.平台基于长江经济带水生态环境功能分区,兼顾不同类别水质目标管理技术的协调性、衔接性和适应性,对水质目标管理相关信息进行跟踪、模拟、分析和三维可视化表达,在水生态环境功能分区管理、数据汇交与信息共享、容量总量管理、风险评估与预警等方面实现业务化运行,实现全景式水质达标形势研判、一体化风险联防联控.平台已在国家长江生态环境保护修复联合研究中心进行业务化运行,将有效提升长江经济带水环境综合管理能力,同时可为其他重要流域水质目标管理提供信息化工作参考.      

环境绩效评估中多种赋权方法的对比分析

文章以成都市2011～2016年统计数据为基础,构建成都市环境绩效评估指标体系,采用4种客观赋权法(均权法、熵值法、标准离差法和CRITIC法)和一种主观赋权法(专家评分法)进行权重分配实验,得到了不同方法下指标体系的权重分配结果、环境绩效指数(EPI)和排名结果。结果表明,4种客观赋权方法在权重分配结果和EPI指数方面与专家评分法具有较大差异。但不同方法间的排名差异则较小;对排名结果进行进一步分级评价后,一致性随着差异减小而提高。笔者认为,客观赋权法不适合单独使用,其结果也不适合以绝对值的形式出现;以排名等较宏观的形式来应用客观赋权法的成果可以有效提高结果的可用性并减小争议。多种赋权法相结合方式是未来环境绩效评估工作中权重分配工作更好的选择。     

亚慢性氟暴露致小鼠海马损伤的影响及分子机制研究

为探明亚慢性氟中毒致小鼠海马损伤及分子机制,选用ICR雄性小鼠140只,随机分为对照(C)、低氟(LF)、高氟(HF)、低氟(LF)+L钙离子通道激动剂(FPL)、低氟(LF)+L钙离子通道抑制剂(NIF)、高氟(HF)+激动剂(FPL)、高氟(HF)+抑制剂(NIF) 7组,分别饮用自来水、5、30 mg·L~(-1)氟化钠水溶液90 d,氟染毒第84 d分别腹腔注射生理盐水、FPL64176、Nifedipine7d.同时,采用开场行为及水迷宫检测学习记忆能力;通过HE切片染色观察海马形态结构;根据试剂盒说明检测脑组织谷胱甘肽过氧化物酶(GSH-PX)、总超氧化物歧化酶(SOD)酶活性及丙二醛(MDA)含量;利用RT-PCR和Western Blot法分别检测海马内凋亡相关分子CaMKⅡ和Bax、Bcl-2基因/蛋白表达.结果发现,HF组、LF+FPL组和HF+FPL组小鼠毛发粗糙,暴躁不安.LF、HF组小鼠自发活动、探究行为及空间学习记忆力显著下降(p0.05),海马细胞损伤,SOD、GSH-PX活性极显著下降(p0.01),CaMKⅡ基因/蛋白表达水平显著(p0.05)或极显著(p0.01)上调,Bax基因/蛋白表达水平显著(p0.05)或极显著(p0.01)上调,Bcl-2基因/蛋白表达水平显著(p0.05)或极显著(p0.01)下调,Bax与Bcl-2基因/蛋白表达水平比值显著(p0.05)或极显著(p0.01)上调;LF+FPL、HF+FPL处理加剧了上述基因/蛋白表达水平,LF+NIF、HF+NIF组可逆转上述基因/蛋白表达水平.结果提示,氟中毒致脑损伤与L型钙离子通道及下游相关分子表达异常密切相关,而L钙离子通道抑制剂(Nifedipine)能改善氟暴露造成的海马损伤.     

Nanoencapsulation of hexavalent chromium with nanoscale zero-valent iron: High resolution chemical mapping of the passivation layer

Solid phase reactions of Cr(Ⅵ) with Fe(0) were investigated with spherical-aberration-corrected scanning transmission electron microscopy(Cs-STEM) integrated with X-ray energy-dispersive spectroscopy(XEDS). Near-atomic resolution elemental mappings of Cr(Ⅵ)–Fe(0) reactions were acquired. Experimental results show that rate and extent of Cr(Ⅵ) encapsulation are strongly dependent on the initial concentration of Cr(Ⅵ) in solution. Low Cr loading in nZⅥ(1.0 wt%) promotes the electrochemical oxidation and continuous corrosion of n ZⅥ while high Cr loading(1.0 wt%) can quickly shut down the Cr uptake. With the progress of iron oxidation and dissolution, elements of Cr and O counter-diffuse into the nanoparticles and accumulate in the core region at low levels of Cr(Ⅵ)(e.g., 10 mg/L). Whereas the reacted n ZⅥ is quickly coated with a newly-formed layer of 2–4 nm in the presence of concentrated Cr(Ⅵ)(e.g., 100 mg/L). The passivation structure is stable over a wide range of pH unless pH is low enough to dissolve the passivation layer. X-ray photoelectron spectroscopy(XPS) depth profiling reconfirms that the composition of the newly-formed surface layer consists of Fe(Ⅲ)–Cr(Ⅲ)(oxy)hydroxides with Cr(Ⅵ) adsorbed on the outside surface. The insoluble and insulating Fe(Ⅲ)–Cr(Ⅲ)(oxy)hydroxide layer can completely cover the n ZⅥ surface above the critical Cr loading and shield the electron transfer. Thus, the fast passivation of nZⅥ in high Cr(Ⅵ) solution is detrimental to the performance of nZⅥ for Cr(Ⅵ) treatment and remediation.     

Relationship between physicochemical properties and dewaterability of hydrothermal sludge derived from different source

Sewage sludge (SS) and deinking sludge (DS) were used to comparatively study the hydrothermal dewatering of sludge with different components. For a better overview, an insight into the relationship between physicochemical properties and dewaterability of hydrothermal sludge was provided. Results found that not all kinds of sludge were suitably conditioned by hydrothermal treatment (HT) in term of the elevation of dewaterability. Higher hydrothermal temperature tended to enhance the dewaterability of SS rather than DS, which was supported by the variation of their physicochemical properties (including water distribution, bonding energy, extracellular polymeric substance (EPS), particles size, acid functional groups and zeta potential in this study). In addition, the changes in surface morphology suggested that the reverse effect of HT on sludge dewaterability was mainly due to their dewatering behavior. For SS, the destruction of EPS structure leaded to the release of bound water, thereby strengthening sludge dewatering. Conversely, “Bridging effect” generated by lignocellulose in DS was beneficial for sludge dewatering; however, the increasing hydrothermal temperature degraded part of lignocellulose and weakened “bridging effect”, finally resulting in worse dewaterability of DS.     

Effects of Na+ on Cu/SAPO-34 for ammonia selective catalytic reduction

Copper-exchanged chabazite (Cu/CHA) catalysts have been found to be affected by alkali metal and alkaline earth ions. However, the effects of Na⁺ ions on Cu/SAPO-34 for ammonia selective catalytic reduction (NH₃-SCR) are still unclear. In order to investigate the mechanism, five samples with various Na contents were synthesized and characterized. It was observed that the introduced Na⁺ ion-exchanges with H⁺ and Cu^2 + of Cu/SAPO-34. The exchange of H⁺ is easier than that of isolated Cu^2 +. The exchanged Cu^2 + ions aggregate and form “CuAl₂O₄-like” species. The NH₃-SCR activity of Cu/SAPO-34 decreases with increasing Na content, and the loss of isolated Cu^2 + and acid sites is responsible for the activity loss.